FireplaceXtrordinair 564 25K User manual

564 25K & 35K Fireback Installation
96100191, 96100198, 96100199, 96100200, 96100201, 96100202
Page 1 of 3 17602188 - 11/10/20 Travis Industries, Inc.
Compatibility
564 25K
564 CF 25K
564 35K
564 CF 35K
Packing List
Rear Fireback
(2) Side Firebacks
The firebacks are fragile (especially the rear fireback). Take care when handling the firebacks.
WARNING Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
Standard and CleanFace Fireback Installation
NOTE On two-sided firebacks make sure to use the desired pattern.
NOTE: If using an optional fireback install the kit prior to performing any other firebox setup.
WARNING: Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
1. Remove the glass frame and logs (see the installation manual for details).
2. Firebox baffle and exhaust restrictor must be removed to install firebacks (replace once firebacks are in
place).
FireboxCeiling
The baffle and exhaust restrictor have keyholes, allowing
removal without removing the screws.
Firebox Baffle

564 25K & 35K Fireback Installation
96100191, 96100198, 96100199, 96100200, 96100201, 96100202
Page 2 of 3 17602188 - 11/10/20 Travis Industries, Inc.
3. Rear Air Deflector (behind the rear log) must be removed (replace after firebacks are in place)
4. Remove and discard the media tray covers
Remove the rear burner.
NOTE: when replacing make sure the
burner is properly aligned and the holes on
the tabs on the burner insert over the pins
o
n
t
h
e
b
u
r
n
e
r
s
t
a
n
d
.
1/4" Nutdriver

564 25K & 35K Fireback Installation
96100191, 96100198, 96100199, 96100200, 96100201, 96100202
Page 3 of 3 17602188 - 11/10/20 Travis Industries, Inc.
5. Restore the fireplace to the correct configuration
R
em
o
v
e
t
h
ecli
p
s
o
n
b
o
t
h
sides (
t
h
ese cli
p
s
h
a
v
e
k
e
y
-
holes, allowing removal without removing the screw)
b
a
c
5/16" Nutdriver
Place the side
firebacks in position.
Secure using the
screws and clips
removed in step “a”
NOTE: The
firebacks will rest on
the bent out tabs of
the media tray.
Place the rear fireback in
position. The side
fireback holds the rear
fireback in place - support
the rear fireback while
installing the side fireback.