Fisher-Price Great Adventures Hidden Treasure Pyramid... User manual

Product Number 77537
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
Product features and decorations may vary from the picture above.
Hidden
Treasure Pyramid
Hidden
Treasure Pyramid
™
™
77537 US 5/25/01 12:49 PM Page 1

Parts
#6 x 1/2" Screw - 12
SHOWN ACTUAL SIZE
CAUTION
This package contains small parts
in it’s unassembled state.
Adult assembly is required.
Main Pyramid
Pyramid Top
Staircase
Magic Chamber
Dungeon
Cobra Launcher
2 Stone Discs
Rope Swing
Crown
Column
Chin
Treasure Box
2 Flame Missiles
2
77537 US 5/25/01 12:50 PM Page 2

Building the Pyramid
3
Back View
Main Pyramid
Magic Chamber
Dungeon
Tab
Slot
• Place the main pyramid on a flat surface with the
back facing you.
• Slide the tab on the magic chamber into the slot
in the main pyramid.
• Slide the tab on the dungeon into the slot in the
main pyramid.
Dungeon
Magic Chamber
• Tip the assembly so that the bottom is facing you.
• Insert three screws through the magic chamber
and into the main pyramid. Tighten the screws
with a Phillips screwdriver. Do not over-tighten.
• Insert three screws through the dungeon and into
the main pyramid. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
• Turn the assembly upright.
1 2
Slot
Tab
Bottom View
77537 US 5/25/01 12:50 PM Page 3

• Hold the staircase upright with the button
facing you.
• Tip the staircase and insert the tabs on either
end of the staircase into the slots in the magic
chamber and dungeon as shown.
• Rotate the staircase down.
Slot
Staircase
Button
Tab
3 4
Back View Back View
Pyramid Top
Slots
• Tip the pyramid top and insert the tabs on either
end of the pyramid top into the slots on the
staircase and dungeon as shown.
Building the Pyramid
4
Tab
Slot
77537 US 5/25/01 12:50 PM Page 4

Building the Pyramid
5
Pyramid Top
• Insert six screws through the pyramid top, staircase,
and into the main assembly. Tighten the screws
with a Phillips screwdriver. Do not over-tighten.
• Insert and “snap” the rope swing tab into the hole
in the pyramid top.
Back View
Back View
Rope
Swing
6
Front View
Chin
Pegs
Hole
• From the front of the assembly, position a hole
on the chin so that it fits over a peg above
the doorway.
• Squeeze the back of the chin to fit the hole
on the other end onto the other peg above
the doorway.
5
77537 US 5/25/01 12:50 PM Page 5

Building the Pyramid
7
ront View
Crown
Sphinx Head
Holes
Tabs
Slots
• Insert the ends of the crown into the holes
above the sphinx head.
• Press down on the crown to “snap” the tabs into
the slots near the front of the sphinx head.
8
ront View
Column
Base
Tabs
• Fit the tabs on the bottom of the column onto
the slots in the base.
• Press down on the column to “snap” it into place.
6
77537 US 5/25/01 12:50 PM Page 6

Label Decoration
Proper label application will help to keep the labels looking their best! When applying labels, keep
the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of this toy with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied.
One-time assembly is now complete.
ront View Back View
7
3
4
10
2
1
11
9
5
6
8
7
77537 US 5/25/01 12:50 PM Page 7

Pyramid eatures
Cobra Launcher
• Insert a flame missile into the slot on the
cobra launcher.
• Press the button to fire the flame missile.
• Place and fire the cobra launcher on the
sphinx head to keep out unwanted visitors.
CAUTION
• Do not launch the flame missile at close range.
• Only use the projectiles (flame missiles) supplied with
this toy.
• Do not fire at people or animals.
8
Cobra Launcher
Flame Missile
Press Button
Ball
Socket
Base
Hint: If the launcher separates from its base, simply fit the ball of the
launcher into the socket of the base and press down to reattach.
77537 US 5/25/01 12:50 PM Page 8

Pyramid eatures
Placing the Traps and Treasure
• Pull the chin down to open the mouth of the
sphinx. Place the two“stone” discs into the
slots inside the mouth. Push the chin back
up to close the mouth.
• Press the button on the staircase to open the
ancient sarcophagus.The doors open and the
sarcophagus base springs up.
• Fit the slot on the treasure box onto the hook on
the sarcophagus base.
• Push the treasure box down.
• Close the sarcophagus doors.
• Pyramid explorers can now press the button to
see the treasure box.
Hint: The treasure box has a drawer that slides out to
reveal riches.
Press Button
Ancient
Sarcophagus
Treasure Box
Hook
9
Stone Disc
77537 US 5/25/01 12:51 PM Page 9

Pyramid Features
Pyramid Entry
Cylinder
PUSH
Try to figure out the secret code
to enter the pyramid!
• Place a figure in front of the pyramid door.
• First, turn the cylinder to show a symbol.
• Then, press the cylinder. Either the door opens to
allow entry, or the sphinx opens its mouth to drop
“stone”discs on the unwelcomed intruder.
• Turn the cylinder to a different symbol and press it
to see what happens.
• To reset the trap, simply replace the discs in the
sphinx’s mouth and close it.
• Slide the door closed.
Traps!
Dungeon
• To set the dungeon trap, press the tab on the
trap door to raise it. Lift the gate to lock it
in place.
• To spring the trap, place a figure on the trap
door and push down.The figure falls into the
dungeon and the gate closes!
Press Button
• As treasure hunters approach the sarcophagus
near the staircase, press the floor button to
drop the stairs and slow them down.
• To reset the stair trap, simply lift the staircase
and “click” it back in place.
10
new page 10 5/25/01 2:25 PM Page 1