Fromm P327 Guide

OPERATION MANUAL / SPARE PARTS LIST
BATTERY - POWERED
PLASTIC STRAPPING TOOL
MODEL P327
43.2333.01
CE Declaration of conformity
We declare that the machine P327
is in conformity with the following standard or
standardised documents:
2006/42/EC
2004/108/EC
Technical file at:
M. Rauch
FROMM System GmbH
Neulandstrasse 10
D-77855 Achern
3.11.2009
R.Fromm
Director
FROMM Holding AG
Hinterbergstrasse 26
CH - 6330 Cham
43233301.en-3/DS/© 01.10 Original instructions

8P327mane-3.fm
4.3 Wearing plate
In order to protect the P327 when using on packages
with hard and rough surface, the tool can be
equipped with a wearing plate and a disk for level
compensation.
The complete wearing plate together with disk and
fastening screws can be ordered under item number
P32.0171.
If the complete bottom side of the tool has to be
protected, the plate P32.0169 must be used.
4.4 Suspension
When working stationary the P327 can be suspended at a spring loaded balancer by using a suspension
bracket.
For working in normal position a stiff suspension bracket with screws and washers can be ordered under item
number P32.0112.
P32.0171
P32.0169
N1.2221
N1.2221
P32.2031
P32.1801
P32.2069
N1.5124
P32.2070
P32.0112
N1.6503
N1.1912
P32.1303

9
P327mane-3.fm
For working in alternating positions a turn able suspension bracket with screws and washers can be ordered
under item number P32.0137.
4.5 Turning button kit
For a remaining adjustment of tension force and welding time.
After exchanging of the turning buttons the adjustment can only be changed with the allen key (2mm) that
comes with the kit. The kit can be ordered under the item number P32.2061.
P32.0137
N1.5105
N2.5623 d
P35.2073 d
P32.1310
P35.2069 d
dP32.1307
N1.1904
N1.6503
dMobilux EP2

15
P327mane-3.fm
9 EXCHANGE OF WEARING PARTS
Remove always the battery from the tool before starting maintenance works.
9.1 Exchange of tensioning wheel and grippers
Disassembling
• Unscrew end cover P35.3211 and remove it;
• Remove the torsion spring N2.5823;
• Remove the tensioning body;
• Remove the tensioning wheel together with the bearing N3.1172 from the tool;
• Unscrew the holders and remove them from the tensioning body;
• Remove the grippers from the tensioning body.
Assembling
Assembling in opposite order. Observe the following:
• Lubricate the internal toothing of the tensioning wheel with Molykote BR2 plus.
Observe the position of the tensioning wheel. The direction of rotation of the
tensioning wheel is marked at the front of the tensioning wheel (see drawing).
Observe the position of the grippers (see drawing).
N3.1172
Tensioning wheel d
N2.5823
N1.1909
N1.6505
P35.3211
N1.1904
N1.6503
Holders
dMolykote BR2 plus
N1.6504
N1.1925
Tensioning body
Grippers

16 P327mane-3.fm
9.2 Exchange of cutter, welding stop gripper and welding gripper
Disassembling
• Unscrew cover P32.2066 and remove it;
• Unscrew end cover P35.3211 and remove it;
• Remove the torsion spring N2.5823 and the tensioning body;
• Remove the tensioning wheel together with the bearing N3.1172 from the tool;
• Disassemble the security ring N2.1118 and remove the lever P32.1414 from the handle shaft;
•Don’t loosen screw N1.1553 at the coupler P32.1251.
• Disassemble the security ring N2.1121 from the coupler, remove the coupler;
• Pull out the centering sleeve P32.1710 from the guide case P35.3215 to left, disassemble the guide case;
• Pull out the pressure spring with a screw driver from the cutter P35.3214;
• Remove the cutter from the driving pin P32.1032;
• Disassemble the screws N1.1305, lift slightly the welding stop gripper P35.3128 and the steel insert P35.3127
and remove them from the tool;
• Push the steel insert without welding stop gripper under the welding gripper P32.1511 until it touches the parallel
pin N2.2110;
• Press down lever P32.2028, if the welding gripper does not sit on the steel insert, put a piece of plastic strap
between welding gripper and steel insert.
• Disassemble the safety ring N2.1121 from the bolt P32.1028, remove the bolt from the welding gripper;
• Press in coupler P32.1410 in order to release the lever P32.2028 again;
• Pull out the steel insert with care to right under the welding gripper;
• Disassemble the security rings N2.1121 from the driving pin P32.1032, remove the driver P32.1035 from the
driving pin;
• Lift the rocker P32.1510 behind the welding gripper with a screw driver, remove the welding gripper together with
the ball cage P32.1027 and the balls N3.1702 from the tool;
• Lower the rocker, remove the thrust piece P32.1029 from the tool.
N2.1121
cP32.1035
N2.1121
P32.1035 c
N1.1904
N1.1929
N1.6503
P32.2066
P32.1710
P35.3215
N2.1121
P32.1028h
P32.1027 g
6 x N3.1702 g
P35.3127
fN1.1305
N1.6504
P32.1511g
P35.3211
N1.1925
N1.6504
N2.1118
P32.1414 c
P32.1032
P32.1410
P32.2028
dMolykote BR2 plus
fLoctite 222
gKlüber Isoflex Alltime SL2
hKlüber Isoflex NBU 15
P32.1029 g
P35.3214 c
dTensioning wheel
N2.5823
N3.1172
cMobilux EP2
P32.1251
N1.6503
N1.1904
N2.2110
P35.3128
Tensioning body
Pressure spring

17
P327mane-3.fm
Assembling
Assembling in opposite order. Observe the following:
Pay attention to the fitting position of the cutter (see drawing).
Safe the screws N1.1305 with Loctite 222.
Observe the position of the tensioning wheel. The direction of rotation of the
tensioning wheel is marked at the front of the tensioning wheel (see 9.1).
Lubrication
• Lubricate the rocker and the bolt P32.1028 in the area of the welding jaw with Klüber Isoflex NBU 15.
• Lubricate the balls, ball cage and the running surface of the balls on the welding gripper with Klüber Isoflex
Alltime SL2.
• Lubricate the cutter and the driver with Mobilux EP2.
• Lubricate the internal toothing of the tensioning wheel with Molykote BR2 plus.
9.3 Adjustment of the coupler
The coupler is adjusted in our works.
In case of replacing the seesaw lever, the coupler or the lever body, the coupler has to be readjusted.
Procedure as follows:
The battery is removed from the tool.
The coupler is fitted into the tool.
• Loosen screw N1.1553.
• Displace thrust piece, so that it touches the two
seesaw levers without moving them.
• Retighten screw N1.1553.
Control:
The thrust piece must touch the seesaw levers (X1).
Both guide pins must sit on the welding stop
gripper(X2).
10 SERVICE
Servicing and repair work must only be carried out by
authorized service centres.
If the tool breaks down or does no longer operate do not disassemble it. Send it fully assembled to the local
service centre (see name and address on the rear page of this manual). Use original packing.
The battery powered plastic strapping tool P327 is a high performance tool. We strongly recommend you to
have it serviced by an authorized service shop after 12 months at the latest if used one shift per day. If used
two or more shifts per day the tool has to be serviced after a shorter period of time.
11 CLEANING
Clean strap gripping parts from strap abrasion
regularly using compressed air.
Thus also the cover can be removed and with a
suitable air gun air been blown on the welding
elements.
Do not use any mechanical tool for cleaning.
When cleaning the surface of the tool do not use water
or aggressive solvents!
N1.1553
X1
X2
Coupler
Thrust piece
Seesaw lever
Guide pin
Welding stop
gripper

19
43233301.z
A1
B
C
23456
D
1 Mobilux EP2
2 Molykote BR 2 plus
3 Loctite 603
4 Loctite 222
5 Klüber Isoflex Alltime SL2
6 Klüber Isoflex NBU 15
7 1 Nm
P32.2003
N3.3172
N1.1909
N1.6505
N1.2230
P32.2101
N2.5823
P32.2106
P32.2108
P32.2107
P35.3211
N3.1172
N21.2102
N3.1172
P32.0160
P32.0182
P35.0145
N3.2356
3 N21.2101
3P32.2037
2N3.2107
2P35.3201
2P32.1712
2P35.3203
N2.4902
N1.6503
3 N2.2189
1P32.1216
1P32.1050
N3.3150
N4.9159
N1.2230
N2.3342 P32.2094
P32.2097
N2.2187
N1.1925
N1.1904
N1.6504
P32.2124
P32.2125

20 43233301.z
A7
B
C
8910
11 12
D
1 Mobilux EP2
2 Molykote BR 2 plus
3 Loctite 603
4 Loctite 222
5 Klüber Isoflex Alltime SL2
6 Klüber Isoflex NBU 15
7 1 Nm
N2.1121
P32.1032
N2.5282
N2.5178
N1.6504
P35.3221
N41.9127
P35.3128
P35.3127
N2.2110
P31.1124
N2.2443
N3.3174
N3.3174
N2.4902
N1.1952
N43.9191
N1.6504
P32.2021
1 P32.2028
P32.2003
P32.1011
P35.3220
P35.0146
P32.0146
P32.0179
N1.1929
N1.1904
N2.2193
P32.1710
P32.2066
P35.3219
P35.3218
P32.2067
1 P32.1910
1 N2.5295
1 N2.5157
1P32.1404
1P32.1405
P32.2022
1 P32.1410
1 N2.5296
N1.6503
P32.1210
N2.1121
P32.1251
6P32.1028
5P32.1511
1P32.1035
5 P32.1027
5 N3.1702 (6x)
5 P32.1029
1P32.1035
N2.1121
1 N2.5294
P35.3215
P35.3223
N1.1553
N1.6504
4 N1.1305
1 P32.1012
1 P35.3214

21
43233301.z
A13
B
C
14 15 16 17 18
D
N3.1160
N3.1178
N2.1610
P35.3105
N3.1157
P32.1412
N2.2119
N2.2122
8 N1.6505
N1.1922
P32.2003
N2.2190
N1.6331
N1.6331
N3.1134
P32.1022
N3.1134
P35.0136
P32.1021
P35.0130
P32.0163
P35.0133
P32.0179
P32.0156
P32.0140
N1.6331
N1.6331
P32.2034
N2.1805
N2.5822
N1.6344
1 P32.1051
2P35.3113
2P32.2044
4N1.2112
2P35.3104
2N3.2105
3N2.2145
1 P32.2033
1P32.1411
P32.2012
2 P35.3103
3 N3.1159
2 P32.1023
N3.4509
2P32.2036
6 P32.1510
N3.2347
N3.2347
2 P35.0136
1 Mobilux EP2
2 Molykote BR 2 plus
3 Loctite 603
4 Loctite 222
5 Klüber Isoflex Alltime SL2
6 Klüber Isoflex NBU 15
7 1 Nm
8 Loctite 243

22 43233301.z
A19
B
C
20 21 22 23 24
D
P32.2030
P32.2080
N43.9192
P32.2064
P32.2078
N3.1137
P32.2024
N2.5153
P32.1415
(N3.3174)
(N1.7206)
(N5.2368)
(P32.2009)
(N5.2367)
P32.2081
(N3.3174)
N21.5124
N51.2194
N61.6216
N1.3150
P32.1414
P32.0172
P32.0150
P32.0151
P32.0179
N1.6504
N2.1606
N1.2216
P32.2003
N1.5120
N2.1118
N43.9192
1 Mobilux EP2
2 Molykote BR 2 plus
3 Loctite 603
4 Loctite 222
5 Klüber Isoflex Alltime SL2
6 Klüber Isoflex NBU 15
7 1 Nm
P32.1011
1P32.1422
2 P32.2015
N3.4509
N3.1137
N61.6216
N3.4520
P32.2006
P32.2121
2 P32.2018
N31.1120
N31.1118
2 P32.0159
7 N1.1934
7 N1.1927
N1.7211
N1.6504
P32.2079
N1.6504
N5.2702
N43.9164
P32.0180
7 N1.1934
P32.2123