Goldmedal 2180 User manual

Condiment Warmers
Instruction Manual
Models #2180, #2182, #2182H, #2191, #2193, #2195,
#2196, #2197 & #2198
PartNo.38043
RevisedJune 1996
Cincinnati, OH 45241-4807 USA
Model #2191
Model #2195

SAFETY PRECAUTIONS

Condiment Warmers
ALLMODELS
1
OPERATING INSTRUCTIONS
These dispensers are designed to use a standard No. 10 Tin that your product came in as the
insert bowl (an optional stainless steel insert bowl is available from your nearest Gold Medal dealer.
Order No. 2194, see Price List).
1. Place bowl spring in water tank.
2. Fill water tank to the top of the bowl spring with hot water.
3. Place No. 10 Tin or insert bowl into the unit. (Bowl spring should be
centered under the container). NOTE: On pump model, contents must be
preheated before inserting. The pump will not function if contents are too
thick.
4. Place lock ring or pump over container, press down and turn until it locks
into unit.
5. Turn switch in Lead-in Cord "ON".
6. Turn heat control to the extreme hot position for quick buildup of heat; after
contents are heated, turn the heat control back to desired position.
CARE AND CLEANING
Clean your machine daily. A clean looking well-kept machine is one of the best ways of advertis-
ing your product.
Use a mild soap and damp cloth to clean the exterior of the unit. All utensils and insert bowls
should be cleaned with a chlorine or iodine type sanitizer to help prevent contamination by micro-
organisms.
Do NOT
operate this
unit without
water!
Do NOT immerse the equipment in water.
Unplug your machine before cleaning.

Condiment Warmers
ALLMODELS
2
MAINTENANCE INSTRUCTIONS
THE FOLLOWING SECTIONS OF THIS MANUAL ARE IN-
TENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO
ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE
NOT INTENDED FOR THE OPERATOR.
Adequate eye protection must be used when servicing this
equipment to prevent the possibility of injury.
Do NOT immerse the equipment in water.
Unplug your machine before servicing.
LIGHT BULB and SIGN REPLACEMENT
Remove the sign retaining angle located directly under the sign by removing the two mounting
screws under the cabinet. This will allow you to slide the sign out the bottom and gain access to
the light bulbs.
HEAT ELEMENT and THERMOSTAT REPLACEMENT
1. Remove the two screws (Item 29 in Parts List) that mount the water tank assembly.
2. Remove the knob from the thermostat (Item 17 in Parts List).
3. Remove the sign retainer and sign.
4. Disconnect wires from thermostat and/or heat element.
5. Remove the bottom plate.
6. Tilt the water tank assembly so the stem of the thermostat will clear the cabinet assembly
and turn 180º to gain access to the springs which mount the heat element and the
thermostat.
7. Replace worn or broken parts, rewire per wiring diagram, and reassemble.

Condiment Warmers
ALLMODELS
3
ORDERING SPARE PARTS
1.Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2.When ordering, please include part number, part name, and quantity desired.
3.Please include your model name and machine serial number (located on the machine
nameplate) with your order.
4.Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
Fax: [phone]
E-mail: [email protected]

Condiment Warmers
ALLMODELS
4
CONDIMENT WARMER – EXPLODED VIEW

Condiment Warmers
ALLMODELS
5
PARTS LIST – CONDIMENT WARMER
Item No. Part No. Description
7 38022 Bowl Spring
8 38029 Water Tank Assembly
9 38227 Thermostat
10 38087 Screw, #6-32 x 3/8" Rd. Hd. PH
11 38012 Heat Element, 120V, 300W
12 38033 Element Spring
13 38034 Caution Label (Water Level)
14 38025 Cabinet Assembly (Welded Shell Only)
38071 Cabinet Assembly (Models 2197, 2198)
15 75212 Insulator
16 38019 Thermostat Cover Plate
17 87049 Knob Heat Control
18 40022 Lead-In Cord w/ Switch
19 44073 Strain Relief #SR-6P-4
20 38001 Front Sign (Nachos)
38002 Front Sign (Buttery Popcorn)
38003 Front Sign (Chili)
38004 Front Sign (Barbeque)
21 47422 Light Bulb Clear
22 75040 Lamp Receptacle
23 82189 Lamp Size Warning Tag, 7 ½ Watt
24 38087 Screw, #6-32 x 3/8" Rd. Hd. PH
38005 Hex Nut, #6-32 (2 Req'd.)
25 38011 Bottom Plate
26 38085 Screw, 10-24 x 3/8" Hex Wa. Hd.
27 74149 Hex Nut, #8-32
74150 Washer, #8 Internal Tooth
87247 Bumper, Rubber Headed Screw
28 38010 Sign Retainer Strip
29 74147 Screw #8-32 x ½" Rd. Hd. PH.
30 38044 Baffle
THE FOLLOWING PART IS FOR MODELS #2193, #2197 AND #2198 ONLY
1 38018 Lever Action Pump w/ Lid for Cheese
THE FOLLOWING PARTS ARE FOR MODELS #2191 AND #2196 ONLY
2 38031 Lock Ring
3 38015 Ladle (2 oz.)
4 38042 Lid Assembly w/ Notch
5 47120 Knob, Lid
THE FOLLOWING PARTS ARE FOR MODEL #2195 ONLY
6 38037 Pump w/ Lid for Butter or Oil
38035 4 Qt. Bain Marie (Not Shown)
THE FOLLOWING PARTS ARE FOR MODELS #2180, #2182 AND #2182H ONLY
20 38000 Stainless Steel Panel
Items 21, 22, 23, 24 and 30 are not used.
THE FOLLOWING PARTS ARE FOR MODEL #2197 AND #2198 ONLY
31 38078 Retainer Bracket, Spout
32 38073 Element 120 Volt, 12 Watt
33 38069 Element Housing
34 38075 Diode Semiconductor
38088 Sleeving, #4 Size
47236 Bushing, Snap SB-500-6
49124 Screw, #8-32 x 3/8" (Brown)
49152 Screw, #8-32 x ¼" Hex Hd.

Condiment Warmers
ALLMODELS
6
PARTS LIST – CONDIMENT WARMER
Parts not Shown
Part No. Description
38013 Carton, Models #2191, #2193 and #2196
38043 Parts Manual
38068 Carton, Models #2195, #2197 and #2198
38084 18 AWG. Silicone Wire, Black
40110 Wire Nut, Black
47010 Label, Safe Operating Instructions
47380 Tube Brush (Not for #2191 or #2196)
74119 Label, Warning Disc. Power
76097 Label, Unplug to Clean
87087 Label, Warning Contact
87223 Sleeving, #7 Size

Condiment Warmers
ALLMODELS
7
PARTS LIST – LEVER ACTION CHEESE PUMP
Part Number 38018
Item No. Part No. Description
1 38045 Name Ring
2 38046 Plastic Lens
3 38047 Flavor Label
4 34048 Lever Handle
5 38049 Link Screw
6 38050 Link
7 38051 Lever Thumb Screw
8 38052 Stud
9 38053 Lever Rocker
10 38056 Heavy Duty Spring
11 38055 Locking Post
12 38016 Mounting Lid
13 38057 Chasis
14 38067 Plunger
15 38059 Valve, Disconnect
16 38060 Cup

Condiment Warmers
ALLMODELS
8
PARTS LIST – BUTTER OR OIL PUMP
Part Number 38037
Item No. Part No. Description
1 38061 Knob, Plain
2 38061 Adjusting Guide, Plastic
3 38063 Spring
4 38055 Locking Post
5 38038 Mounting Lid, Pump
6 38057 Chassis
7 38067 Plunger
8 38059 Valve Disconnect
9 38060 Cup
10 38040 Plug