Goldmedal 2192EX User manual

Mini-Condiment Warmer
Instruction Manual
Models #2192EX, #2202EX, #2203EX and #2204EX
PartNo.38123EX
RevisedJune 1996
Cincinnati, OH 45214-2089 USA
BACK TO INDEX

SAFETY PRECAUTIONS
NOTE
The information, specifications and illustrations contained in this manual represent
the latest data available at time of publication. Right is reserved to make changes as
required at the discretion of Gold Medal Products Company without notice.
Any alterations to this equipment will void the warranty and
may cause a dangerous situation. NEVER make alterations
to the equipment.
Always wear safety glasses when servicing this equipment.
Machine must be properly grounded to prevent electrical shock
to personnel.
Do NOT immerse the equipment in water.
Always unplug the equipment before cleaning or servicing.
This equipment is designed and sold for commercial use only. This
equipment is not to be used by the consumer in home use. Do not allow
direct contact of this equipment by the public when used in food service
locations. Only personnel trained and experienced in the equipment
operation may operate this equipment.
Carefully read all installation instructions before operating the equipment.
NEVER put your fingers or any object into the heating area.
We do NOT assume any liability for injury due to careless
handling or operation of this equipment.

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
1
OPERATING INSTRUCTIONS
These dispensers are designed to use a standard No. 5 Tin that your product came in as the insert
bowl (an optional stainless steel insert bowl is available from your nearest Gold Medal dealer. Order
No. 2199, see Price List).
1. Place bowl spring in water tank.
2. Fill water tank to the top of the bowl spring with hot water.
3. Place No. 5 Tin or insert bowl into the unit. (Bowl spring should be centered
under the container).
4. Place lock ring over container, press down and turn until it locks into unit.
5. Turn switch in Lead-in Cord "ON".
6. Turn heat control to the extreme hot position for quick buildup of heat; after
contents are heated, turn the heat control back to desired position.
CARE AND CLEANING
Clean your machine daily. A clean looking well-kept machine is one of the best ways of advertising
your product.
Use a mild soap and damp cloth to clean the exterior of the unit. All utensils and insert bowls should
be cleaned with a chlorine or iodine type sanitizer to help prevent contamination by microorganisms.
Do NOT
operate this
unitwithout
water!
Do NOT immerse the equipment in water.
Unplug your machine before cleaning.

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
2
MAINTENANCE INSTRUCTIONS
THEFOLLOWINGSECTIONS OF THIS MANUALARE IN-
TENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO
AREFAMILIARWITH ELECTRICAL EQUIPMENT.THESEARE
NOT INTENDED FOR THE OPERATOR.
Adequate eye protection must be used when servicing this equip-
ment to prevent the possibility of injury.
Do NOT immerse the equipment in water.
Unplug your machine before servicing.
HEAT ELEMENT and THERMOSTAT REPLACEMENT
1. Remove the knob from the thermostat (Item 26 in Parts List).
2. Remove the back panel (Item 10 in Parts List).
3. Disconnect the wires from the thermostat and/or heating element.
4. Replace worn or broken parts, rewire per wiring diagram and reassemble.

Mini-Condiment Warmer
MODELS#2192,#2202, #2203AND #2204
3
ORDERING SPARE PARTS
1.Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2.When ordering, please include part number, part name, and quantity desired.
3.Please include your model name and machine serial number (located on the machine
nameplate) with your order.
4.Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
Fax: [phone]
E-mail: [email protected]

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
4
MINI-CONDIMENT WARMER ASSEMBLY

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
5
PARTS LIST – MINI-CONDIMENT WARMER
Item No. Part No. Description Quantity
1 38015 2 Oz. [59ml] Dipper 1
2 38019 Thermostat Cover Label 1
3 38023 Thermostat 1
4 40110 Wire Nut 1
5 38033 Element Spring 2
6 38034 Caution Label (Water Level) 1
7 38087 Screw, #6-32 x 3/8" [9,5mm] RD. HD. PH. 1
8 38022 Bowl Spring 1
9 38101 Cabinet Assembly 1
10 38104 Back Panel 1
11 38107 Baine Marie Assembly 1
12 38110 Foil Heater 120 Volt, 175 Watt 1
13 38114 Key Lock Ring 1
14 38116 Name Label 1
15 38117 Mount Stud Lock Ring 3
16 38118 Lid Assembly 1
17 40022 Lead-In Cord with Switch 1
18 44073 Strain Relief #SR-6P-4 1
19 47120 Knob Lid Lift 1
20 74142 Screw, #8-32 x ¼" [6,4mm] RD. HD. PH. 5
21 74147 Screw, #8-32 x ½" [12,7mm] RD. HD. PH.3
22 74149 Hex Nut, #8-32 5
23 74150 Washer, #8 Internal Tooth 8
24 87247 Bumper, Rub. Headed Screw 4
25 75212 Insulator 1
26 87049 Knob, Heat Control 1
27 47010 Label, Safe Operating Instuction 1
28 76097 Label, Unplug To Clean 1
29 47300 Tinnerman Fastener 4
32 47655 Ring Terminal 1
33 49177 Screw, #8-32 x ¾" [19mm] Hex HD. 2
34 74119 Label, Warning Disc. Power 1
35 38127 Thermostat Retainer 1
36 38075 Diode 1
37 38093EX Heat Element for Export Model 1
38 38130 Heater Bracket 1
39 87087 Warning 1
40 38078 HeaterClip 1
41 38140 Pump Assembly 1
PARTS NOT SHOWN
38115 Carton Mini Condiment Warmer
38123EX PartsManual
38121 Decal, Nachos
38122 Decal, Chili
38128 Decal, Bar-B-Que

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
6
WIRING SCHEMATIC – MINI-CONDIMENT WARMER

Mini-Condiment Warmer
EXPORTMODELS #2192,#2202, #2203AND #2204
7
WIRING SCHEMATIC
MINI-CONDIMENT WARMER with HEATED SPOUT

WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and two (2) years with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use, volt-
age, abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
ORIMPLIED,ANDOF ALL OTHER OBLIGATIONS OR LIABILITIESONOUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIP-
TION ON THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASERFIRSTCALLSGOLD MEDAL PRODUCTS COMPANYAT 1-800-
428-2676 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIP-
MENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERN-
ING THE REPAIR OR REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
GOLD MEDAL PRODUCTS COMPANY
10700 Medallion Drive
Cincinnati, OH 45241-4807 USA