Goldmedal 2365EX User manual

Nacho Cheese Warmer
Instruction Manual
Model #2365, #2365LS and #2365EX
Part No. 38409
Cincinnati, OH 45241-4807 USA
Model #2365, 2365EX
Model #2365LS
a
BACK TO INDEX

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
II

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
II

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
1

Nacho Cheese Warmer
MODELS #2365 AND #2365LS
1a

OPERATING INSTRUCTIONS
1. Fill water well to the bottom of the “water level“ ring.
2. Insert the cheese bowl into the water.
3. Install the cover and ladle into the top of the cheese bowl insert.
4. Plug the unit into the wall socket.
5. Set control knob to 150º F setting.
6. Let cheese heat for 45 minutes (stirring every 15 minutes) before serving.
7. Turn heat control switch to “OFF” position when unit is not in use.
The warmer
should not
be operated
without
water in the
well.
a

Nacho Cheese Warmer
MODELS #2365 AND #2365LS
2
CARE AND CLEANING
Clean your machine daily. A clean well kept machine is one of the best
ways of advertising your product.
Use a mild soap and damp cloth to clean the exterior of the unit.
All utensils and the insert bowl should be cleaned with a sanitizing solution to help prevent con-
tamination from micro-organisms.
LIGHT BULB & SIGN REPLACEMENT
1. Remove the cheese bowl insert from the unit.
2. Remove the water from the machine.
3. Remove the two screws that hold the retaining angle.
4. Slide the sign out from the bottom.
5. Remove the bulb from the socket and replace as necessary.
6. Clean all interior surfaces before re-assembly.
7. Reinstall the sign and retaining angle. Re-install the two screws.
Unplug the machine before cleaning. Do not immerse the
unit in water.
Unplug the machine before servicing.
a

Nacho Cheese Warmer
MODELS #2365 AND #2365LS
3
HEAT ELEMENT & THERMOSTAT REPLACEMENT
1. Remove the cheese bowl insert.
2. Turn the unit upside down.
3. Remove the screws from the bottom of the unit. It is not necessary to remove the rubber
feet.
4. Unfasten the thermostat screw and the two screws from the heating element.
5. Disconnect the wires from the thermostat and heating element.
6. Replace unserviceable parts and rewire as shown in the wiring diagram.
MAINTENANCE INSTRUCTIONS
THE FOLLOWING SECTIONS OF THIS MANUAL ARE IN-
TENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO
ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE
NOT INTENDED FOR THE OPERATOR.
Adequate eye protection must be used when servicing this
equipment to prevent the possibility of injury.
Do NOT immerse the equipment in water.
Unplug your machine before servicing.
a

Nacho Cheese Warmer
MODELS #2365#2365LSDQG(;
4
ORDERING SPARE PARTS
1.Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2.When ordering, please include part number, part name, and quantity desired.
3.Please include your model name and machine serial number (located on the machine
nameplate) with your order.
4.Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
Fax: [phone]
E-mail: [email protected]
a

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
5
CABINET ASSEMBLY

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
6
CABINET ASSEMBLY PARTS LIST
Item No.
Model
#2365
Part No.
Model
#2365LS
Part No.
Model
#2365EX
Part No.
Description
1 22038 22038 42369 Lead In Cord
2 38077 Socket, Lamp Holder
3 38227 38227 38227 Thermostat
4 38272 Light Baf�le
5 38279 38279 38208 Tank Heat Element
6 38284 Sign Cover
7 38291 Lamp, 6 Watt White
8 38294 38294 38294 Insulation Wrap
9 38295 38295 38295 Insulation Bottom
10 38297 Retaining Angle
11 38303 38303 38303 Temperature Scale
12 38389 38389 38389 Knob, Heat Control
13 38417 38417 38417 Well Body, Welded Assembly
14 38419 38419 38419 Panel, Control
15 38420 38420 38420 Label, Fill to Line (not shown)
16 38421 Lighted Cabinet, Welded Assembly
17 38403 38403 Unlighted Cabinet, Welded Assembly
18 38423 Bottom Cover, Lighted
19 38418 38418 Bottom Cover, Unlighted
20 42532 42532 40328 Switch, Rocker
21 40353 40353 40353 Wire Nut, Black
22 42828 42828 42828 Sheet Metal Screw
23 47010 47010 47010 Label, Safe
24 47300 47300 47300 Tinnerman Fastener
25 74119 74119 74119 Warning, Disconnect Power
26 n/a n/a n/a
27 76026 76026 76026 Strain Relief, Cord
28 82189 Label, Max. Lamp
29 87149 87149 87149 Label, Caution Disconnect
30 87223 Sleeving, Fiberglass
31 87247 87247 87247 Bumper, Headed Screw

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
7
WIRING DIAGRAM - Model 2365

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
8
WIRING DIAGRAM - Model 2365LS

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
9
WIRING DIAGRAM - Model 2365EX

Nacho Cheese Warmer
MODELS #2365, 2365LS, and 2365EX
10