GOVECS GO! S2.4 User manual

1
www.govecs.com
USER’S MANUAL
AND SERVICE BOOK
BEDIENUNGSANLEITUNG
UND SERVICEHEFT
MANUAL DE USUARIO
I. LIBRO DE MANTENIMIENTO
MANUEL D’UTILISATION
ET CARTE DE SERVICE
LIBRETTO DI ISTRUZIONE
E MANUTENZIONE
GEBRUIKERSHANDLEIDING
& SERVICE BOEK
GOVECS GO! S1.2 (+)
GO! S2.4 (+)

GOVECS GO! S1.2 (+)
GO! S2.4 (+)
www.govecs.com
USER’S MANUAL
AND SERVICE BOOK

4
E
N
Dear User of scooter GOVECS,
We are excited that you have made the decision to purchase a GOVECS scooter and it is our pleas-
ure to welcome you among the great number of GOVECS’ scooter drivers.
This manual includes instructions concerning proper use,maintenance, and care of your GOVECS
scooter. For your own safety and optimal comfort of usage we advice you to carefully read this
manual before the first use.
Proper maintenance of the vehicle, observing all usage instructions included in this manual and
visiting GOVECS service stations for regular inspections will ensure faultless operation of your
scooter as well as continuation of warranty period.
Have a comfortable and accident free journey!

5
EN
Table of contents
1. Safe riding instructions
1.1 Pre-ride activities
1.2 Clothing
1.3 Riding technique
1.4 Carrying cargo and passengers
1.5 After riding
2. Vehicle equipment
2.1 Left side of the vehicle
2.2 Right side of the vehicle
2.3 Operational elements
2.4 Ignition switch
2.5 Speedometer
2.6 Left side controllers
2.7 Right side controllers
2.8 Throttle
2.9 Trunk
2.10 Charging of the battery
2.11 Handle
2.12 Position the vehicle on the center
stand
2.13 Hook for bags
2.14 Lighting
2.15 Tires
2.16 Brakes
2.17 Controll of braking liquid level
2.18 Controll of belt tention
2.19 Motor Controller Communication
Codes
2.20 Technical specification
2.21 How to check the VIN number of a
vehicle
3. Taking care of the vehicle
4 . Transfer of the vehicle
4.1 Inspection before transfer of the
vehicle
4.2 Acceptance of the vehicle
4.3 Warranty terms
4.4 Technical inspection
5. Helpful Tips

6
E
N
1. Safety guidelines
1.1 Pre-ride activities
Before riding scooter make sure that:
• The charging plug is out of the socket
• The battery is suciently charged
• The lighting, turn signals, and horn function properly
• The mirrors are adjusted for proper use
• There is the correct air pressure and proper tread depth in tires
• The brakes work properly (braking test while pushing the scooter)
• There is the correct level of braking fluid and that the brake pads are not worn out
• It is easy to turn the handlebars without resistance, fully left and right
• There is proper belt tention
1.2 Clothing
• Always ride in proper clothes and proper helmet.
• Wear tight fitting and comfortable clothing
• Wear proper boots (don’t ride in high heels, flip-flops, or similar open footgear)
Inadequate clothing may become a threat to safe riding!

7
EN
1.3 Riding technique
• Vehicle should be ridden carefully and sensibly
• Always hold the handlebars with two hands
• While turning the rider and passenger should tilt along with the scooter
• Particular wariness is recommended while riding on poorly hardened or wet road surfaces
• Pay attention to atypical sounds or behavior of the scooter while riding
1.4 Carrying cargos and passengers
• In order to carry objects or bags one should explicitly use top case, under seat trunk or a
hook for bags. The maximum weight allowance for top case is 5 kg.
• Maximum scooter weight allowance must not be exceeded (150kg including passengers’
weight)
• The scooter is allowed to carry maximum 2 persons
1.5 After riding
• Check if the battery needs charging
Riding with low level of battery significantly decreases its life.
Battery life can be extended by recharging it each time with use of originally installed
GOVECS charger. There is no risk of overcharging, because after reaching maximum
charging level the charger disconnects automatically (even though the fen is still
working).

8
E
N
2. Vehicle equipment
2.1 Left side of the vehicle
1. Left mirror
2. Right mirror
3. Speedometer
4. Ignition switch
5. Single piece seat
6. Handle
7. Seat lock
8. Rear shock absorber
9. Rear wheel
10. Center stand
10
9
8
7
6
5
5
4
4
3
3
2
3
2
1

9
EN
2.2 Right side of the
vehicle
1. Brake lever
2. Head-light
3. Front turn signal
4. Hook for bags
5. Front Wheel
6. Storage compartment
under the seat
7. Cable for charging under
the seat
8. Parking and braking light
9. Rear turn signal
10. Registration Plate
Light (only „+” version)
11. Engine
2
3
1
9
8
6
8
7
3
3
4
5
10
11

10
E
N
2.3 Operational elements
1. Right mirror
2. Speedometer
3. Handlebar throttle
4. Front wheel brake lever
5. Right side switches
6. Ignition switch
7. Hook for bags
8. Left mirror
9. Rare wheel brake lever
10. Left side switches
11. Power socket 12V
1
3
3
4
3
4
5
9
11
9
10
2
5
6
5
6
7
8

11
EN
2.4 Ignition switch
Turned o
• All the functions turned o
• Handlebar is not locked
• Scooter can be rolled
• Scooter can be safely handled
Riding position (vehicle turned on)
• All the functions active
• Scooter is ready for riding
• Taking out the key in this position is not possible
• The key should be turned to riding position only
after the rider is seated on the vehicle, directly
before riding.
Note:
The sound of the engine is not heard although
the handlebar throttle is active.
Ignition o
Riding position

12
E
N
Handlebar locked
Ignition switch position „Handlebar locked”
• All the functions turned o
• The handlebar locked
• Scooter can be safely handled
Locking handlebar
1. Turn the handlebar left all the way to the end
2. Push in the key turning it left at the same time
to the padlock position
3. Pull out the key

13
EN
2.5 Speedometer
Speedometer is equipped with the
following functions and indicators
1. Head light
2. Right turn signal
3. Riding speed
4. Charging battery indicator
5. Selection button [Select]
6. Mode button [Mode]
7. Clock
8. Kilometres: total / daily
9. Left turn signal
10. Battery signal light
11. Charging indicator
4
4
3
3
2
6
7
7
8
5
3
2
1
11
10
9

14
E
N
Controllers handling
Switching between total kilometers (odo) and daily kilometres (trip)
Holding pressed mode button [mode] (6) for one second switches from total kilometers count
(odo) to the dialy kilometers one (trip) .
Pressing the selection button for 3 seconds [select] (5) results in resetting the trip meter.
Pressing the mode [Mode] (6) and selection [Select] (5) buttons for 3 seconds switches speed
unit from km/h to mph (miles per hour) or vice-versa.
Setting the clock
In order to set up the clock keep pressing the mode [Mode] (6) button until the minutes value
begins to pulsate.
Then set up the minutes by pushing in the selection [Select] (5) button.
After pushing in mode button [Mode] (6) again the hour value begins to pulsate and the hour
can be set. In order to confirm the setting, the mode button [Mode] (6) should be pushed in
again.

15
EN
2.6 Left side controllers
Turn light is on by moving to the left or to the right the turn light switch (3) according to
intended riding direction.
In order to turn it o , press the „turn o” button (2).
1. Running light / head light switch
1.* Running light / high beam switch for „+” version
2. Turn signal button (for canceling)
3. Turn signal switch
4. Horn button
4
3
2
1
1*

16
E
N
2.7 Right side controllers
1. On/O economy function switch
• Economy function allows the
increase of vehicle distance
range.
• Setting the switch to „on”
position slightly reduces the
acceleration of the scooter, at
the same time lowers the use of
energy, thus increasing the range
of the scooter.
2. Safety kill switch
• - This kill switch MUST be moved to the left hand side position when the ignition
key is being turned on! After ignition is turned on, move the kill switch to the right
hand side position. Scooter is activated. Failure to do so will display the error code
F-0884 on the speedometer.
Economy function does not aect maximum speed!
2.8 Throttle
By turning of handlebar throttle (3) the speed can be controlled
2
1
3

17
EN
2.9 Trunk
1. Trunk
2. Seat lock
• In order to unlock the seat the key should be inserted and turned
left, then the seat will raise up.
• In order to close the seat push the seat in the middle until you hear
the lock click
• Maximum load of the trunk is 5 kg.
Note!
Never place the key in the trunk before
locking the seat
Please take care of the charging cable
when closing
* Depending on the model of the scooter it’s appearence may be dierent
2
Trunk*
1

18
E
N
2.10 Charging of the battery
1. Charging cable (in trunk under the seat)
2. Plug CEE7-VII at the end of charging cable
GO! S1.2 GO! S2.4
Blinking 0-80% charged -
Solid light 80-99% charged 80-90% charged
No light 100 % charged 100% charged
Charging cable can be used for all sockets type E/F or
CEE 7/4 with specification 16A/250V.
Charging time of empty battery is about 4-5 hours.
Battery should be charged each time it is possible since it
extends its lifetime.
Charging phase is visible on Batery signal light on
speedometer.
Avoid riding with not fully charged battery since
it decreases its lifetime. There is no possibility to
overcharge the battery.
Important note: battery requires to be charged at least once a month, even if you do
not use your scooter.
Do not load the battery at temperature lower than -10 degrees.
1
2

19
EN
2.11 Handle
Handle (1) allows passenger to hold during
riding. Moreover, the handle is helpful while
positioning the vehicle on center stand.
GO!S2.4 is equipped with handle that is also a
top case holder (2).
2.12 Position the vehicle on the
center stand
1. In order to support the vehicle on stand,
press down the catch of the center stand
from the left side of the scooter (arrow 1)
2. Both legs of center stand must stand on
the surface (arrow 2)
3. Press down the catch of the center
stand at the same time pull the handle
backwards and upwards until the scooter
is safely supported on the center stand.
Do not sit on the scooter while it is
supported on the stand since it may
damage the vehicle!
* Depending on the model of the scooter it’s appearence
may be dierent Position on center stand*
Handle GO! S1.2
1
3
3
1
1
2
2
2
Handle GO! S2.4

20
E
N
2.13 Hook for bags
Hook for bags (1) can be used to hang bags.
Hook has protection, which prevents from unfastening
and loosing the bag.
In order to hang a bag the operator should expand the
hooks in directions showed with arrows.
Remember that while turning the vehicle the
swinging bags may aect riding.
Do not hang weights exceeding 3 kg on the hook.
2.14 Lighting
Each time, before riding the lighting installation should be checked in respect of its
functionality, damages, and settings.
• Head-light („+” high beam) and parking light
• Front and rear turn signals
• Tail light
• Brake light for front and rear brake
• Number-plate light
Due to the fact that the LED energy-saving bulbs were used in GOVECS scooters, in case
of abnormal functioning or damage of lighting installation, its repair should be ordered
at GOVECS service station.
Hook for bags
1