Grandview Sky-Show User manual

Grandview Sky-Show
User’s Manual
Imported and Distributed in Australia by
Herma Technologies
Factory 4A, 6 Albert St
Preston, VIC 3072
For more information please go to
www.grandviewscreens.com.au
or call 1300 730 025
Nov 2008 v1
Protecting Your Screen:
• Keepawayfromdirectsunlightor
 hightemperatures.
• Examineboththefrontandback 
 surfacesbeforeretractingintothe 
 casetomakesureitisfreeofdust, 
 dirt,insectsorotherforeignmatter.
• Useasoftbrushorclothtolightly 
 removeanyforeignparticles.
Cleaning Your Screen:
• Donotuseanysolvents,chemicals 
 orabrasivecleanersonthe
 screensurface.
• Useamilddetergentwithwarmwater
 toremoveanymarksonthesurfaceor
 screencase.
• Alwaysimmediatelydabthescreen 
 withasoftclothtoavoidsoapmarks.
• Donotscrubthesurface.
Warranty: 12 Months
Limit Settings
Thescreenisfittedwith2limits.Thelimits
automaticallystopthescreeninthefullyUp
(toplimit)andfullyDown(bottomlimit)
positions.Youcanadjustthebottomlimitto
setyourviewingheight.
Setting The Bottom Limit
Caution:Settingthebottomlimitbeyondtheblack
leadermayrenderyourscreeninoperableand
voidyourwarranty
Thebottomlimitswitchisaccessiblethrougha
grommetedholeontheleftsideofthecasing.
Lowerthescreentotheoperatingpositionthen
insertthesuppliedHexkeyintothewhitecoloured
screw.Turnitclockwisetoraisethescreenorturn
itanti-clockwisetolowerthescreen.
Whenloweringthebottomlimitthescreenwill
moveasyouadjustit.
Whenraisingthebottomlimitpleaseliftandlower
thescreenwiththeremoteorsidebuttonstosee
thenewlimitsetting.

To the Owner:
CongratulationsonpurchasingaGrandviewSky-Show,
designed to produce the sharpest, most pleasing
pictureswithmaximumconvenience.
Important Notes:
• Pleasereadthisinstructionmanualbeforeuse.
• Pleasedonotattempttoadjustorrepair
 theproduct.Youwillvoidthewarranty.
• Pleaseretainthisinstructionmanualfor
 futurereference.
• Handlethescreencarefullyduringtransportation.
• Toensurelonglastingviewingenjoyment,always
 keepthescreenrolledupwhennotinuse.
Operational Instructions
Mountthescreenasshownbelow.
Step 2
Cable
Supplied
Cable BoxPower
Cable LockAllen Key RF Remote
Step 3
Inserttheplug.
PlugthepowercordintotheCableBox.
Step 4
Ceiling
Plug Socket
Plug
Cable
(Drop 5m)
Step 5
Using RF Remote
Yourremotecontrolcomeswithbatteriesinstalled.
Tooperateyourremote:
Presstoliftthescreen
Presstostopthescreen
Presstolowerthescreen
TheMicroswitch
isusedforretractingor
loweringcable.
UP for screen fabric
Down for screen fabric
Down for cable
Up for cable
STOP for both
Carefullyunpackthescreen.
Fixthecableboxprovided.
Step 1
Cable
Secure
positioning piece
Please secure your safety limit lug at least
10mm above the new limit
Cable Limit Settings
(The limits are preset at min 300mm and max 4950mm)
• Turntheremotecontrolover,locatethe 
 programsettingbutton.
 Presswithafinetip,theLEDwilllightup 
 indicatingtheprogrammingmode.
• PressthemicroswitchUP/DOWN.When
 buttonthenewcablepositionisreached,
 presstheSTOPbutton.
• Presstheprogrammingbuttonagain.
 Nowthelimitisset.
Up for cable
Down for cable