Grandview HideAway HH3 User manual

HIDEAWAY
USER MANUAL
ambertech.com.au
amber.co.nz
amber.co.nz
ambertech.com.au
Cleaning and Maintenance:
1. The HideAway fascia can be cleaned with a mild
detergent, water and a soft cloth to wash off any
marks. Rinse and dry with a clean cloth or towel.
2. Refer to your Grandview Motorised Screen
Instructions for details on cleaning your screen surface.
Warranty: 12 Months
Imported and distributed in Australia by
Happy Viewing!
MODELS: HH3 / HH4 / HH5 / HH6 / HH7

Congratulations on
purchasing a HideAway
Step 1
You will need a cutout in your ceiling -
depending on the size of your HideAway
(double check the size first, see table below)
Step 2
The side of the box marked “Viewing Side” faces
the projector.
Step 7
Testing
Check the screen travels freely through the slot and
doesn’t catch. If out of alignment you may need to
insert a spacer.
Step 8
Follow the instructions supplied with your screen
for the correct wiring diagram.
Step 9
Test that the screen operates correctly, and set the
limits, if required. Follow the instructions supplied
with your screen to do this.
Step 10
Screen should always retract to the Upper Limit
previously set by the factory as the default position.
The fabric should not be exposed when in the
closed position.
Step 3
The mounting brackets for the HideAway box are
secured at both ends for easy installation.
Step 4
Hang the HideAway so that the Aluminium Trim
is flush with the underside of the ceiling.
Step 5
When you have secured the HideAway box
on the ceiling, open the access panel and hang
your Grandview Screen on the brackets
supplied inside.
Step 6
Cable Access
Grandview screens have the cable exit on the
left-hand side of the screen (from the viewing
side). You will need to drill new access holes
on this side.
Mounting
Brackets
Box Width (b)
Box Height (c)
Box Length (a)
Product
Code
External Box
W x D x H (mm)
Trim Flange
W x D (mm)
Trim Slot
L x W (mm)
Shipping Size
L x W x H (mm)
Gross
Weight (Kg) To Suit Grandview IP Screens
HH3 2560 x 220 x 160 2604 x 266 2400 x 50 2900 x 380 x 260 51 GRIP084V, GRIP100V, GRIP085H, GRIP092H, GRIP095H,
GRIP094C, GRIP103C
HH4 2975 x 220 x 160 3019 x 266 2815 x 50 3250 x 430 x 270 62 GRIP120V, GRIP102H, GRIP112H, GRIP110C
HH5 3360 x 295 x 250 3406 x 340 3200 x 90 3600 x 450 x 270 85 GRIP120H, GRIP130H, GRIP120C, GRIP130C
HH6 3750 x 300 x 250 3796 x 346 3590 x 90 3880 x 455 x 285 93 GRIP140H , GRIP150V, GRIP140C, GRIP150C, GRIP150H
HH7 5006 x 303 x 250 5066 x 366 4750 x 90 5155 x 470 x 290 155 GRIP180V, GRIP160H, GRIP180H, GRIP200H, GRIP180C, GRIP200C