Great Little Trading G2297 User manual

1

20/12/2021
V4
easy - medium - hard two-person job
Large Classic Toy Box
G2297, L3582
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
any site updates.
• Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
GLTC Ltd, 12 Buckhold Road,Wandsworth, London, SW18 4GP, United Kingdom

2
Customer Service:
•
•
If you find that any components are missing or damaged, please do not
begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Producct Care:
•
•
•
Wipe clean using a soft damp cloth followed by a dry cloth.
DO NOT use cleaning products which contain ammonia, solvents or
abrasive material.
DO NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is any thing you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know;
we’ll pass any helpful hints and tips on to other customers via our website
and update the instructions.
All you need to do is drop us a line at [email protected]
Thank you
Safety Warnings:
• This product has been designed, manufactured and tested to comply with
BS EN 17191:2021 seating for children.
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Children should be kept away from the product during assembly to avoid
any possible risk of injury.
• This product is suitable for children in the age range of 3 years plus.
• Maximum weight load 100Kg. Do not overload.
• DO NOT place this product near a window as it can be used as a step by
the child and cause the child to fall out of the window.
• DO NOT place this product near a window where cords from blinds or
curtains could strangle a child.
vicinity of the product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• WARNING. Do not use this bed if any part becomes broken, torn or
missing. Please contact GLTC Customer Services on 0344 848 6000
immediately to arrange for suitable replacement parts.

#1
#1
#1
#2
#2
#1
#1
#1
#3
#3
#3
#3
#1 22x Wooden Dowels
35mm
#2
#3 #4
#5
25x Screws
25mm
15x Screws
12mm
#6 1x Safety Hinge
30mm
10x Screws 3x Hinges
You will need (not supplied)
Phillips Head Screwdriver
3
Component Check List
A
B
C
C
A1x Front Panel 1x Back Panel
B
C2x Side Panels 1x Base Panel
D
D
E1x Back Upstand 1x Left Upstand
F
G1x Right Upstand 1x Lid Panel
H
Step 1:
Attach front panel A, back panel B and 2x side panels
C together.
Hardware forStep1:
8x #1 Wooden Dowels
12x #2 Screws (25mm)
Step 2:
Attach base panel D
When positioning the base
panel,ensure the rounded
corners are at the front
of the unit with the cut
out handle.
Note:
Hardware forStep2:
8x #1 Wooden Dowels
10x #3 Screws (30mm)

4
H
#1
#1
#1
#1
#2
#2
#2
Step 4:
Attach the upstand to the lid panel H
Hardware forStep4:
6x #1 Wooden Dowels
7x #2 Screws (25mm)
Step 3:
Create upstand
Hardware forStep3:
2x #2 Screws (25mm)
Hardware forStep5:
6x #5 Screws (12mm)
Step 5:
Attach the hinges to the lid panel H
Note:
Ensure the countersunk holes
on F&G are on the outside.
#5
#5
#4
#2
#2
E
F
G
4
3x #4 Hinges

#6 Safety Hinge
Step 6:
IMPORTANT: 2 people are needed to complete this step safely.
With the assistance of a second person to hold the lid panel H in place,secure
the hinges to the toy box.
IMPORTANT: 2 people are needed to complete this step safely.
Attach safety hinge.
We suggest you attach the l lower part of the safety hinge first then
tilt the lid until the screws at the top of the hinge can be secured.
It is important to fully insert the screws that attach the safety hinge
to ensure the hinge works correctly.
Do not leave the screws protruding.
9x #5 Screws (12mm)
#5
#5
Hardware forStep6:
Hardware forStep7:
1x
4x #2 Screws (25mm)
Step7:
#2
#2
#2
#2
#6
5
Copyright© 2019 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.