HIK VISION 2800 Series User manual

2800 Series
Access Controller
Quick Start Guide
UD05852B

DS-K2800 Serial Access Controller
i
User Manual
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are
the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries
(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to
be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision.
Unless otherwise stipulated, Hikvision does not make any warranties, guarantees
or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Access Controller
Product Name
Serials
Access Controller
DS-K2801 Serials Access Controller
DS-K2802 Serials Access Controller
DS-K2804 Serials Access Controller
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer

DS-K2800 Serial Access Controller
ii
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS
IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT
SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS
IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
0200001070410

DS-K2800 Serial Access Controller
iii
Regulatory Information
Please take attention that changes or modification not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU, the LVD Directive 2014/35/EU, RoHS Directive
2011/65/EU.

DS-K2800 Serial Access Controller
iv
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

DS-K2800 Serial Access Controller
v
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the
following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a
result of dropping it may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
•Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the manufacturer.
Safety Information
Signs
Description
Warning
Follow these safeguards to prevent
serious injury or death.
Note
Follow these precautions to prevent
potential injury or material damage.
Tips
The additional information as a
complimentary of the contents.
Warnings:
Please adopt the power adapter from the legitimate factory which can meet the safety extra
low voltage (SELV) standard.
Do not install, wiring, or uninstall when the power is still on.

DS-K2800 Serial Access Controller
vi
To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
This installation should be made by a qualified service person and should conform to all the
local codes.
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Note:
Please do not drop the objects on hard surface, and keep the equipment from the magnetic
field. Avoid install the equipment to the vibrated or vulnerable places.
Please do not install the device in the extreme temperature (higher than 65℃or lower than
-20℃)
Keep ventilation.
Do not operate in humid environment.
Do not operate in explosive environment.
Keep the device clean and dry.
Avoid bare electrical wire.

DS-K2800 Serial Access Controller
1
Table of Contents
CHAPTER 1 PRODUCT DESCRIPTION................................................................. 2
1.1 OVERVIEW .......................................................................................................2
1.2 PRODUCT FUNCTION ..........................................................................................2
CHAPTER 2 APPEARANCE................................................................................. 4
CHAPTER 3 TERMINAL CONNECTION ............................................................... 6
3.1 DS-K2801TERMINAL DESCRIPTION ......................................................................6
3.2 DS-K2802TERMINAL DESCRIPTION ......................................................................8
3.3 DS-K2804 TERMINAL DESCRIPTION ...................................................................11
CHAPTER 4 EXTERNAL DEVICE WIRING .......................................................... 15
4.1 CARD READER WIRING .....................................................................................15
4.2 INSTALLING DOOR LOCK ....................................................................................16
4.2.1 Installation of Cathode Lock ................................................................16
4.2.2 Installation of Anode Lock ...................................................................16
4.3 CONNECTING THE EXTERNAL ALARM DEVICE.........................................................17
4.4 DOOR BUTTON WIRING DIAGRAM......................................................................17
4.5 THE CONNECTION OF MAGNETICS DETECTION.......................................................18
4.6 CONNECTING POWER SUPPLY.............................................................................18
CHAPTER 5 SETTINGS..................................................................................... 19
5.1 INITIALIZING THE HARDWARE .............................................................................19
5.2 RELAY INPUT NO/NC.......................................................................................19
CHAPTER 6 ACTIVATING DEVICE..................................................................... 22
6.1 ACTIVATION VIA SADP SOFTWARE ......................................................................22
6.2 ACTIVATION VIA CLIENT SOFTWARE .....................................................................24

DS-K2800 Serial Access Controller
2
Chapter 1 Product Description
1.1 Overview
DS-K2800 is a powerful and stable access controller, using the logical architecture design.
DS-K2800 is designed with TCP/IP network interface and its signal processed with special
encryption and can be run offline. Anti-tampering function is also supported.
1.2 Product Function
The access controller is equipped with 32-bit high-speed processor
Supports TCP/IP network communication, with self-adaptive network interface.
The communication data is specially encrypted to relieve the concern of privacy
leak
Supports recognition and storage of card number with maximum length of 20
The access controller can store 10 thousand legal cards and 50 thousand card
swiping records
Supports first card open-door and first card authorization function, super card and
super password function, online upgrade function and remote control of the doors
Supports Wiegand interface for accessing card reader. Wiegand interface supports
W26/W34 and is seamlessly compatible with third-party card reader with Wiegand
interface
Supports various card types as normal/ disabled/ blacklist/ patrol/ guest/ duress/
super card, etc.
Supports time synchronization via NTP, manual or automatic method
Supports record storage function when it is offline and insufficient storage space
storage alarm function
The access controller has watchdog design
Data can be permanently saved after the access controller is powered off.

DS-K2800 Serial Access Controller
3
Supports I/O linkage, and event linkage
Supports alarm of offline event exceeding 90%
Multiple event upload methods: channel, center group, and listening
500 groups of authentication code
Anti-pass-back function