HIK VISION K1T604 Quick guide

Title:
Face Terminal Wiegand Output Configuration
Version:
v1.0
Date:
4/6/2019
Product:
Access Conrtol
Page:
1 of 4
Face Terminal Wiegand Output Configuration
Instructions
Face terminals, such as K1T604, 605, 606, 607 support Wiegand output mode. In this output
mode, face terminal will send person’s card number after this person authenticate
successfully on the terminal. So you can connect face terminal to access controller or other
face terminal to work as a reader.
Steps
1. Wiring
Connect face terminal’s Wiegand to controller or another access control terminal:
2. Power on face terminal and controller.
3. Change face terminal’s Wiegand mode to output:
We can do this step either on ivms4200 or device local interface. Choose direction
as output and choose Wiegand 26 or 34 according to requirement.
Local Interface

Title:
Face Terminal Wiegand Output Configuration
Version:
v1.0
Date:
4/6/2019
Product:
Access Conrtol
Page:
2 of 4
4200 Interface
4. Apply person information to both controller and face terminal

Title:
Face Terminal Wiegand Output Configuration
Version:
v1.0
Date:
4/6/2019
Product:
Access Conrtol
Page:
3 of 4
First Choice for Security Professionals
HIKVISION Technical Support