Hioki 3665-20 User manual

LAN CABLE HiTESTER 3665
N
Ne et tw wo or rk k C Co on ns st tr ru uc ct ti io on nw wi it th h
O
On ne eS Si in ng gl le eI In ns st tr ru um me en nt t
Actual Size
Wiremap
Detect Split Pairs with Wiring Check
Cable Length
Get NVP-Enhanced Measurement Accuracy
Direction
Identify Up to 21 Cable Destinations

1
W
Wi ir re em ma ap p
For wirin
g
confirmation and locatin
g
brokenwiresafterinstallation.QuickPASS
/
FAILreadin
g
helps
y
ou complete
y
our workfaster.
PASS Display Examples
Bothstraight-throughandcrossovercables(10/100BASE,
1000BASE-T and 1000BASE-TX) can be checked.
FAIL Display Examples
Split Pair
A ver
y
common mistake-twist
p
airs Pins 3+6, and Pins 4+5,
have been incorrectly con-
nected.
Full
y
Compatible to
CAT6 LAN Cables
Detect the existence of
Super-
sensitive
Detection
shields or check for shield inte
g
rit
y
.
Shielded Unshielded
Straight Cable Cross Cable
Extremely
Intuitive
Wide
LCD
Screen
2
2
Identify the terminator ID here.
3 Cable Length
Obtain a record of the entire
length of the cable, or up to the
point where the cable is dam-
aged.
1
Large PASS/FAIL display, cable type, reason for cable failure and shield condition.
Reversed
Pins 1 and 2 are reversed.
Transposed
Pins 3 and 6 have been incor-
rectly paired with Pins
4 and 5.
Open
Pin 1 is open at a distance 7
meters from the LAN cable
tester.
Short
Pins 1 and 2 are shorted at a
distance 10 meters from the LAN
cable tester.
Just connect a cable, and
press the TEST button
Check all parameters such as wiremap,
direction and cable length at a glance.
Caution! Can you find s
s
p
p
l
li it t
p
p
a
ai ir rs s
?
?
P
roper
Wi
r
i
ng Split Pair
PASS LAN cable wires should be connected as shown in the diagram FAIL A "Split Pair" is detected when Pins 3 and 6 are not twisted and
above, such that Pins 3 and 6 are twisted. paired together as shown above.
Direction (ID No.)
Wiremap (Wiring Status)

bl
3
2
D
Di ir re ec ct ti io on n
Locate up to 21 unique cable destinations.
Have
y
ou ever had trouble
installing additional cables?
Up to 21 terminators can be connected (additional terminators
sold separately.) Convenient for confirming the connection desti-
nations of multiple cables.
Take advantage of the conveniences offered by the tes-
ter's capabilities to check wiring while confirming multiple
cable destinations.
IncreasedYou will never need to go back and forth
Efficiency!again just to change the terminators.
3
C
Ca able e
L
Le en ng gt th h
Measure for cable len
g
th and detect the location of broken or short-circuited wires.
*
NVP (Nominal Velocity of Propagation) is the ratio of the speed of a signal in the cable relative to the speed of light in a vacuum.
NVP differs according to the type of cable and the manner in whi c h t h e w i r e p a i r s a r e t w i s t e d , s o m e a s u r e m e n t a c c u r a c y c a n b e enhanced by setting the NVP value for the particular type of cable to be measured.
n
Activating the NVP function is as simple as 1-2-3
The NVP
*
setting is a cable-length compensation function that enhances the ac-
curacy of cable length measurements.
A
ccuracy with NVP activated:
n ± 4% rdg. ± 1m
(vs.previous HIOKI model: 15% rdg. ±1m)
Increased
Precision!
Preparation
Prepare a reference cable using a
known length of the same type as that
to be measured (at least 100-meter
length recommended).
1
On the Settings screen, se-
lect “Length Adjust”.
2
Press the TEST button to
measure the (already known)
length of the reference cable.
3
Calibrate the display to the
measured reference cable.
Setting
Finished
How Can Split Pairs Affect the Network?
u Communication speed can be suppressed - 100BASE signals may reach only 10BASE speeds.
u Excessive communication errors - data transfer may be intermittent or completely inhibited.
u Cables miswired in this way are more susceptible to electrical noise.
Split pairs appear to be properl
y
connected to the untrained eye,
and cannot be detected with continuity
testing.
To properly check LAN cable wiring,
a tester capable of detecting split pairs is indispensable.
The HIOKI 3665 can do the job for you properly and accu-
OK! rately by also detecting split pairs.

n Specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
@ 23 ±5 °C, 80% RH or less, non-condensating, with battery indicator unlit
Measurable cables Twisted-pair cable
100 Ω characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6
Compatible connectors RJ-45 plugs
Measurement Items
[Wiremap] Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690
Detectable errors: open, short, reversed, transposed, split pairs and other miswiring
[Cable Length]
Measurable lengths: 2 to 300 m, 6.6 to 984 ft
Measurement accuracy: ±4% rdg. ±1 m, ±4% rdg. ±3.3 ft
Display resolution: 0.1 m
[Destination] Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690
-01 to
9690- 04 to test multiple cables simultaneously
Display 128 × 64 dot matrix LCD
(with backlight)
Functions
Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds)
Beeper: sounds when pressing buttons and when measurement results are displayed
Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed)
Auto Power Save: the 3665 turns off automatically about 10 minutes after the last button press
Battery Check: Battery indicator blinks when voltage falls below 2.4 V
Unit Switch: Select between meters or feet
Compliance
Standards
Safety Standard: EN61010 Pollution Level 2
EMC Standard: EN61326
Allowable Input 3.3 V peak
(between RJ-45 pins)
Operating Temperature & Humidity 0 to 40 °C, 80% RH or less, non-condensating
Storage Temperature & Humidity –10 to 50 °C, 80% RH or less, non-condensating
Power supply LR6
(AA) alkaline batteries × 2
Maximum Power Consumption 1.4 VA
Operating Time Approx. 50 hours
(measuring once per minute)
Dimensions Approx. 85 mm (3.35 in) W × 130 mm (5.12 in) H × 33 mm (1.30 in) D
Mass Approx. 160 g (5.6 oz)
Model : LAN CABLE HiTESTER 3665
Model No. (Order Code) (Note)
3665-20
(English model)
Accessories: Terminator 9690 ×1, Carrying case ×1, LR6 (AA) alkaline battery ×2,
Instruction manual ×1
n Supplied Accessories n Options
TERMINATOR 9690
CARRYING CASE
(Stores the HiTESTER 3665 and TERMINATORs 9690)
TERMINATOR 9690 -01 (IDs 1 to 5)
TERMINATOR 9690 -02 (IDs 6 to 10)
TERMINATOR 9690 -03 (IDs 11 to 15)
TERMINATOR 9690 -04 (IDs 16 to 20)
CARRYING CASE 9249 (stores the 3665 and 9690 together)
TERMINATOR 9690
CARRYING CASE
TERMINATOR 9690
-01
CARRYING CASE 9249
(for storing everything together)
Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies.
HEADQUARTERS
81 Koizumi, Ueda, Nagano 386-1192 Japan
TEL [phone] FAX [phone]
http://www.hioki.com / E-mail: [email protected]
HIOKI USA CORPORATION
TEL [phone] FAX [phone]
http://www.hiokiusa.com / E-mail: [e-mail]
HIOKI (Shanghai) SALES & TRADING CO., LTD.
TEL [phone]/0092 FAX [phone]
http://www.hioki.cn / E-mail: [e-mail]
HIOKI SINGAPORE PTE. LTD.
TEL [phone] FAX [phone]
E-mail: [email protected]g
HIOKI KOREA CO., LTD.
TEL [phone] FAX [phone]
E-mail: [email protected]
HIOKI EUROPE GmbH
TEL [phone] FAX [phone]
E-mail: [email protected]
DISTRIBUTED BY
All information correct as of Sept. 12, 2017. All specifications are subject to change without notice. 3665E5-79M Printed in Japan