HOMCOM A91-075 User manual

A91-075/A91-075V01
Introduction
Vibration Plate Machine can not only quickly reduce excess body fat, but also achieve the
effect of strengthening the body. It uses the smooth side motion in the sports science, the
principle of amplitude superposition, so that the body fat can move, consume calories,
eliminate excess body fat accumulated in the body. You only need to use 5-10 minutes a day,
which is equivalent to the calories you burn for 1 hour, which is equivalent to burning
calories 30 times faster than running. It makes it easy for you to sculpture and perfect body,
and the design of the product is very user-friendly. Its vibration speed can be adjusted by
itself (this product is divided into different files, generally choose the middle file, no need to
be too high), both men and women can choose The vibration frequency suitable for white is
convenient to use and the effect is obvious. Moreover, it utilizes this high-frequency and
low-amplitude vibration mode, and can also improve the inflexibility of the legs and feet
caused by rheumatism and the imbalance of walking legs caused by the elderly for a long
time without walking. The therapeutic effect has been affirmed by all walks of life. Asian TV
has reports on health sports products that can be used by the whole family. It helps you to
lose excess fat during exercise, instead of letting you go on a diet or diarrhea. So it won't
bounce, and it takes only 5-10 minutes per day to use the body shaping machine, which is
equivalent to the calories you consume for an hour of jogging. You can definitely vacate it in
5 minutes, and you use this 5 minutes, not only Help you (men): Have a strong, fit body;
(Women) help you have a fascinating figure, but also accelerate your metabolism and delay
aging. You can definitely use it with confidence. Having it is equivalent to having health,
beauty and confidence.
EN

Thank you for purchasing this product!
Please read this manual carefully before use and pay special attention to safety precautions
to ensure proper operation and use of this product.
Please keep this manual in a safe place for future reference.
Catalogue
Safety Cautions.....................................................................2
Product Description..............................................................3
Panel Description..................................................................4
Remote Control Description..................................................5
Operation Steps.....................................................................6
Exercise Methods...................................................................7
Cleaning And Maintenance Of The Machine.........................8
Common Problems And Treatment Methods........................9
Product Parameters................................................................9
Remarks: The picture of the manual is a range, not a picture of real products.

Safety Cautions
Environment
1. Do not use this product in wetor dustyenvironment,to avoidthe occurrence ofelectric
shockor motor failure;
2. Donot use this productat room temperature above 40 degrees Celsius;
3. Donotplace the product inaplace outside or indirectsunlight;
4. Please lay theproducton the flat ground.
Note:if theproductis moved from the low temperature to a higher temperature, waitforan
hour before use.Inorder toavoidcondensation of water vapor on the machineparts,
resultingin failureof the machine.
People who are not suitable for using this product
If you have any of the following circumstances,please consult your doctor before using this
product.
1. The people who is receiving treatmentor physical discomfort;
2. Malignant tumor patients;
3. A pregnantwoman ora woman in the physiological period;
4. Heart patients;
5. Osteoporosis patients;
6. In vivo implantation of an eleotronic instrument suchas a pacemaker;
7. Children under 10 years of age,60years ofage or older.please reduce the frequency of
vibration;
8. People with artificial limb or handicapped
Need to know when to use
Before using,please put your watch,bracelet, mobile phone and othervaluables and
keys,knives andother sharp objects, so as not to damage the goods orcause physical
damage.
1. Please do not smoke in using;
2. Do not use this product with othermedical equipment;
3. Do not use this product for medical purposes;
4. Do not use this product aftera meal or drink;
5. When using this product,do not let children or petsnear, It is strictly prohibited to insert
finger or otherobjects into theclearancebetween the middle cover and a base.
6. Thisproduct bearing10KGS,if you are morethan the weight,please do not use;
7. This productis only for oneperson,please do not use two ormorethan two peopleat
the same time.
Prohibit
It is forbidden to disassemble,disassemble or modify theproducts withoutpermission, in
order to avoid the electric shockor cause the malfunction ofthe machine.
Please stop using the following situations
1. Accidentalwater or other liquids splash on theproduct or on the remotecontroI;
2. Relatedparts are damagedorinternalabnormal sound;
3. Feel abnormalorlocal pain during use;
4. Sudden power failure;
2

5. Occurrenceof lightning.
About power plug and power cords
1. Pleasecheck if the voltage is inconformitywith therequirements of theproduct before
use.
2. Do notpull theplugwith wethands to avoidelectricshock;
3. Pull out theplug by gripping the power cord while pulling out the socket. Do notforce
puIl, bending, twistingpower cord;
4. When powercut offorlong term is not used,please turn off thepower switch,unplug
thepower plug;
5. If the power cord is damaged, please stop using itimmediately, turn off the power
switch,pullthe power cord outofthe socket and contact theprofessionalmaintenance
personnel.
Product Description
Model number
Size
Speed levels
Special function
LMS-S031
56*35*13.5CM
0-99
Magnetotherapy+Shiatsu

Panel Description
Remote Control Description

Operation Steps
1. Plug the power plug into the power supply and turn on the power switch.
2. Press the "Start / Stop" button, the machine starts, when in the working state, press
"Start / Stop” button and the machine stops working.
3. In the stop situation, press “Time+” and “Time-” to adjust the exercise time.
4. In the non-automatic mode, press “Speed+” and “Speed-” to adjust the speed of the
movement.
5. Press the "Program" button to cycle through them.
6. After using, press the machine switch, turn off the power switch, unplug the power.
Remark: In the state of power-on stop, no operation for 3 minutes, the machine will
automatically shut down, press the machine switch
Exercise Methods
1. For the waist and hip,stand on the machine,spare apart the legs,let the same as the
shoulder wide.
2. For the thigh,stand on the machine,let the keen bending.
3. For the thigh and calf,sit in the chair,put the foot on the machine,let them vibration.
4. Just for calf,sit on the floor,let the calf on the machine,also can be lean back.
5. For the shoulder joint,put the hands on the machine,let them distant,go down your
knee.
These all be normal posture,you can find others posture.Each posture will be benefit
different body.

Benefits
Body sculpting: Through the balanced high-frequency vibration of
the machine, it can be used with various body postures to deeply
stimulate muscle tissue, reduce fat accumulation, enhance muscle
elasticity, and shape the body shape, thus showing the perfect
body curve and rejuvenating your body. confidence
Fitness:
Using the horse steps in Chinese Kung Fu, the meditation of
Buddhism, the meditation of Taoism, and the essence of
traditional Chinese fitness, and advocating advanced static sports
concepts, you can completely relax and relieve soreness and
eliminate your pain without leaving your home. Fatigue, reconcile
qi and blood, improve circulation in the body, and then achieve the
effect of strengthening the body.
Cleaning And Maintenance Of The Machine
Please confirm you have cut off the power before clean. The power plug has beed pulled out
the socket.Then you can use the cloth with detergent to clean foot skin and shell.Last,Use dry
clothdeal with these detergent.
Caution
Do not use benzene,thinner and alcohol.gasoline and other corrosive and volatile cleaners to
clean the products.
Otherwise maybe cause the product discoloration or internal structure
corrosion,cracking,etc.
For the remote control,you only use the dry cloth clean,not the wet.
Please confirm you have cut offthe power andthe plug is pulled.Wipe off the dustand
dirt,please move to the placeaway from theheating,another also preventthe wet.lfyou wlll
not use for alongtime. please use thedusty cover.

Common problems and treatment methods
case
probable cause
method
Can not start
The power plug is not plugged in.
Plug in the power plug
Product power switch is not
turned on
Turn on the power switch
The instantaneous current is too
large and the fuse is blown
Replace the fuse of the same
model
"Xiuxiu"or"Dada"
sounds when the
machine is working
This is the sound that the machine
makes when it is running, not the
machine failure. It is a normal
working sound.
No need to deal with
Remote control
operation did not
respond
The remote control battery is
dead
Replacement battery
The remote control is too far from
the machine
The effective distance of infrared
sensing is 2.5 meters
Stop during use
Has reached the default working
time
Turn it on again after 10 minutes
Can't operate
normally
May execute commands too
frequently
Turn off the power and restart
If it has not been removed after the above method, please contact the manufacturer or local
distributor, do not disassemble and repair it.
Product Parameterst
Product name: Vibration Platform
Voltage: AC220V-240V 50Hz
Power: 200W