Horizon Fitness OXFORD 5 User manual

AIR ROWER OWNER’S MANUAL
Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
OXFORD 5

3 ENGLISH
XX FRANÇAIS
XX ESPAÑOL

3
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this rower. It is the responsibility of the owner to ensure that all users of this rower are
adequately informed of all warnings and precautions. If you have any questions after reading this guide, contact Customer
Tech Support at the number listed on the back panel.
This rower is intended for in-home use only. Do not use this rower in any commercial, rental, school or institutional setting.
Failure to comply will void the warranty.

4
TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS:
• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop
exercising immediately and consult your physician before continuing.
• When exercising, always maintain a comfortable pace.
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting
the machine.
• Do not move footplates by hand.
• Keep the topside of the foot support clean and dry.
• Care should be taken when mounting or dismounting the equipment.
• Do not wear clothes that might catch on any part of the rower.
• Always wear athletic shoes while using this equipment.
• Do not jump on the rower.
• At no time should more than one person be on the rower while in operation.
• This rower should not be used by persons weighing more than the specified user capacity in the OWNER’S MANUAL
WARRANTY SECTION. Failure to comply will void the warranty.
• This rower is intended for in-home use only. Do not use this rower in any commercial, rental, school or institutional setting.
Failure to comply will void the warranty.
• Do not use rower in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms,
bathrooms, car ports or outdoors. Failure to comply will void the warranty.
• The folded equipment should stored at horizontal place for possible stability risk.
• Before using the rower, ensure the FOLDING LOCKING PIN is firmly attached to the frame.
WARNING

5
TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS:
• Do not use other attachments that are not recommended by the manufacturer. Attachments may cause injury.
• Do not operate where aerosol (spray) products are being used or when oxygen is being administered.
• Use the rower only as described in the owner’s manual.
• To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)
• Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
• At NO time should children under the age of 13 or pets be within 10 feet of the machine.
• At NO time should children under the age of 13 use the rower.
• Children over the age of 13 or disabled persons should not use the rower without adult supervision.
• Do not remove the console covers unless instructed by Customer Tech Support. Service should only be done by an
authorized service technician
It is essential that your rower is used only indoors, in a climate controlled room. If your rower has been exposed to colder
temperatures or high moisture climates, it is strongly recommended that the rower is warmed up to room temperature
before first time use. Failure to do so may cause premature electronic failure.
WARNING
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

6

7
ASSEMBLY
Review intructions in entirety before beginning assembly. It is very important to follow the assembly instructions correctly
and to make sure all parts are firmly tightened at each stage. If the assembly instructions are not followed correctly, certain
frame elements may appear loose, create excess noise and damage the machine.
Before proceeding, find your air rower’s serial number located on the main frame and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:
WARNING
SERIAL NUMBER:
MODEL NAME: HORIZON FITNESS OXFORD 5 AIR ROWER

8
CONSOLE WITH MAST
FOLDING LOCK PIN
SEAT RAIL
SEAT
END CAP
CONSOLE MAST BRACKET
TOP CAP
MAIN FRAME
FRONT STABILIZER
SEAT STOP BUMPER
REAR STABILIZER
ROTATION SLEEVE
MIDDLE STABILIZER
PEDAL BRACKET
SEAT BRACKET

9
TOOLS REQUIRED:
FScrewdriver
F5 mm L-Shaped Wrench
F5 mm T-Shaped Wrench
F13 / 15 mm Wrench
PARTS INCLUDED:
F1 Main Frame
F1 Front Stabilizer
F1 Middle Stabilizer
F1 Rear Stabilizer
F1 Seat Rail
F1 Pedal Bracket
F1 Seat
F1 Seat Bracket
F1 Console With Mast
F1 End Cap
F2 Seat Stop Bumper
F1 Rotation Sleeve
F1 Folding Locking Pin
F1 Top Cap
F1 Console Mast Bracket
F1 Hardware Package
CAUTION
Read all precautions and instructions in this manual before assembling or using this
equipment. Save this manual for future reference.
PRE ASSEMBLY
Questions? Missing parts?
Contact your local dealer.
NEED HELP?

10
1
2
3
A
B
C
D
ASSEMBLY STEP 1
A Open HARDWARE FOR STEP 1.
B Attach FRONT STABILIZER (1) to MAIN
FRAME (2) using 4 BOLTS (A), 4 SPRING
WASHERS (B), 2 ARC WASHER (C) and 2
FLAT WASHERS (D).
C Attach MIDDLE STABILIZER (3) to MAIN
FRAME (2) using 4 BOLTS (A), 4 SPRING
WASHERS (B), 2 ARC WASHERS (C) and 2
FLAT WASHERS (D).
HARDWARE FOR STEP 1
PART TYPE QTY
ABOLT 8
BSPRING WASHER 8
CARC WASHER 4
DFLAT WASHER 4

11
ASSEMBLY STEP 2
A Open HARDWARE FOR STEP 2.
B Attach PEDAL BRACKET (4) to SEAT RAIL (5)
using 4 BOLTS (E) and 4 SPRING WASHERS
(B).
C Screw SEAT STOP BUMPER (6) to SEAT
RAIL (5).
HARDWARE FOR STEP 2
PART TYPE QTY
EBOLT 4
BSPRING WASHER 4
B
4
6
5
E

12
ASSEMBLY STEP 3
A Open HARDWARE FOR STEP 3.
B Fix SEAT PAD (7) on SEAT BRACKET (8) by 4
BOLTS (F) and 4 SPRING WASHERS (G).
C Slide the Seat Assembly (SEAT BRACKET
AND SEAT PAD) onto the SEAT RAIL (5).
HARDWARE FOR STEP 3
PART TYPE QTY
FBOLT 4
GSPRING WASHER 4
7
8
5
G
F

13
ASSEMBLY STEP 4
A Open HARDWARE FOR STEP 4.
B Screw SEAT STOP BUMPER (6) to SEAT
RAIL (5).
C Attach REAR STABILIZER (9) to SEAT RAIL
(5) by 4 BOLTS (E) and 4 SPRING WASHERS
(B).
D Insert the END CAP (10) to SEAT RAIL (5) and
use 2 SCREWS (H) to fix the end cap.
HARDWARE FOR STEP 4
PART TYPE QTY
EBOLT 4
BSPRING WASHER 4
HSCREW 2
5
H
10
6
B
E
9

14
ASSEMBLY STEP 5
A Open HARDWARE FOR STEP 5.
B Attach SEAT RAIL (5) to MAIN FRAME (2), put
ROTATION SLEEVE (11) through SEAT RAIL
(5) and MAIN FRAME (2), then using 2 FLAT
WASHERS (I) and 2 BOLTS (J) to tighten
SEAT RAIL (5) on the MAIN FRAME (2).
C Plug the FOLDING LOCKING PIN (12) into the
hole on MAIN FRAME (2) and then screw it
tightly by clockwise.
HARDWARE FOR STEP 5
PART TYPE QTY
IFLAT WASHER 4
JBOLT 4
J
2
I
12
11
5

15
ASSEMBLY STEP 6
A Open HARDWARE FOR STEP 6.
B Put CONSOLE CABLE (13) through the slot of
CONSOLE MAST BRACKET (14).
C Attach CONSOLE MAST BRACKET (14) to
MAIN FRAME (2) using 2 SPRING WASHERS
(B) and 2 HEX HEAD BOLTS (J).
D Attach TOP CAP (15) to MAIN FRAME (2)
using 2 PHILLIPS HEAD BOLTS (K) and 2
SCREWS (L).
HARDWARE FOR STEP 6
PART TYPE QTY
BSPRING WASHER 2
J HEX HEAD BOLT 2
K PHILLIPS HEAD BOLT 2
LSCREW 2
K
15
J
L
B
13
14
14
2

16
ASSEMBLY STEP 7
A Open HARDWARE FOR STEP 7.
B Connect the CONSOLE CABLES (13) and tuck
excess cable length into the CONSOLE MAST
BRACKET (14).
C Attach CONSOLE MAST (16) to CONSOLE
MAST BRACKET (14) using 1 BOLT (M) and 1
NUT (N). DO NOT over-tighten bolt.
HARDWARE FOR STEP 7
PART TYPE QTY
MBOLT 1
NNUT 1
16
N
14
M
13

17
ASSEMBLY COMPLETE!

18
FOLDING & UNFOLDING
Loosen and remove the
folding locking pin
A FOLDING
B UNFOLDING
Lift and hold the seat, loosen and
remove the folding locking pin, put
the seat down to the end of rail.
Lift up the seat rail.
Step on the foot plate.
Fold vertically and
lock the rail.
Pull down the rail.
Pull the seat at the top position
of rail, then plug the folding
locking pin to the rear of rail to
keep seat from falling down.
Insert the folding locking
pin and screw tightly.
CAUTION OXFORD 5 is foldable; take care to avoid the foot plate when passing by.

19
AIR ROWER OPERATION

20
DISPLAY FEEDBACK
1) STROKES: Counts up to 9900 or counts
down to zero from preset value.
2) SPM: Stroke per minute
3) CALORIES/PULSE: Auto scans the
heart rate and calories expended during
exercise. If the computer does not detect
a heart rate, only calories will display.
4) WATTS: Shows the watts expended
during exercise.
5) TIME/500M: Estimated time to reach
500M
6) METERS: Tracks total distance covered
from zero up to 9999 meters, or counts
down to zero from the preset value. If
the value exceeds 9999, the computer
calculates the distance by 10 meters. For
instance, 10.01 means 10010 meters.
7) TIME: Measures total working time up to
99:59, or counts down to zero from preset
time.
8) PROFILE DISPLAY: Shows the intensity
of workout, watts profile and SPM profile.
9) MESSAGE BAR: Shows the instruction
message.
10) RACING DIAGRAM: Shows the
competition status of user and computer.
C
B
7
6
9
10
1
2
3 4
8
5
A
G HFED