Huawei V100R001 User manual

HUAWEI TE30 Videoconferencing Endpoint
V100R001
User Guide
Issue
01
Date
2013-03-27
HUAWEI TECHNOLOGIES CO., LTD.

Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://enterprise.huawei.com
Email:
[email protected]

HUAWEI TE30 Videoconferencing Endpoint
User Guide
About This Document
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
About This Document
Overview
This document describes how to install, configure, maintain, and troubleshoot the HUAWEI
TE30 Videoconferencing Endpoint (TE30 or endpoint for short). It also includes step-by-step
instructions for conferencing tasks.
When using this document, note the following:
Except chapters 11 Web-based Remote Management, 12 Troubleshooting, and 13
Maintenance, which apply to the endpoint web interface, descriptions and configuration
in this document apply to the endpoint's user interface controlled by the remote control
(remote controlled UI for short).
To access the menu screen, press on the remote control. You can find the option bar
on the left of the menu screen. This option bar is your interface to all functions except
calling.
To move up, move down, hide, or show an icon in the option bar, select and then
the desired icon.
To hide the option bar, press the left arrow key, , or on the remote control.
To show the option bar again, press on the remote control.
Intended Audience
This document is primarily intended for:
Administrator
The administrator has access to all menus on the web interface and remote controlled UI.
When Advanced Settings is password-protected, the administrator must enter the
password for access. For details about how to set the password, see 10.2.1 Setting the
Administrator Password.
Common user
Common users have access to all menus except Advanced Settings on the web interface
and remote controlled UI.
Symbol Conventions
The symbols that may be found in this document are defined as follows.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
About This Document
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
Symbol
Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium or low level of risk,
which if not avoided, could result in minor or moderate
injury.
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or
supplement important points of the main text.
Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue 01 (2013-01-30)
This issue is the first official release.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Contents
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv
Contents
About This Document.................................................................................................................... ii
1 Product Introduction ....................................................................................................................1
2 Installation and Initial Configuration ......................................................................................3
2.1 Installing Your TE30 ........................................................................................................................................3
2.2 Connecting Cables ...........................................................................................................................................3
2.3 Powering On and Off .......................................................................................................................................4
2.4 Using the Wizard..............................................................................................................................................6
3 Network ........................................................................................................................................10
3.1 Setting IP Parameters .....................................................................................................................................11
3.2 Setting H.323 Parameters...............................................................................................................................13
3.3 Setting SIP Parameters ...................................................................................................................................15
3.4 Setting Wi-Fi Parameters ...............................................................................................................................18
3.5 Setting QoS Parameters..................................................................................................................................20
3.6 Setting Firewall Parameters............................................................................................................................22
3.7 Setting Network Diagnostics Parameters.......................................................................................................24
4 Display and Camera ...................................................................................................................25
4.1 Configuring Video Output..............................................................................................................................25
4.2 Configuring Video Input ................................................................................................................................29
4.3 Selecting and Controlling a Camera...............................................................................................................30
4.3.1 Selecting a Camera................................................................................................................................31
4.3.2 Adjusting the Focal Length...................................................................................................................31
4.3.3 Controlling a Camera............................................................................................................................31
4.4 Saving and Using Camera Presets..................................................................................................................32
5 Microphone and Speaker ..........................................................................................................33
5.1 Connecting an Audio Input Device ................................................................................................................33
5.1.1 Connecting a VPM220..........................................................................................................................34
5.1.2 Connecting a VPM220W......................................................................................................................34
5.1.3 Connecting Other Audio Input Devices ................................................................................................36
5.2 Connecting a Speaker.....................................................................................................................................36
5.3 Configuring Audio .........................................................................................................................................36

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Contents
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v
6 Conference....................................................................................................................................39
6.1 Answering an Incoming Call and Exiting a Conference ................................................................................40
6.2 Setting Conference Parameters ......................................................................................................................40
6.3 Initiating a Conference...................................................................................................................................45
6.4 Sharing a Presentation....................................................................................................................................47
6.5 Creating a Favorite Conference......................................................................................................................48
6.6 Scheduling a Conference................................................................................................................................50
6.7 Joining an Authentication Conference............................................................................................................50
6.8 Managing the Address Book ..........................................................................................................................52
6.8.1 Managing the Local Address Book.......................................................................................................52
6.8.2 Managing the Network Address Book ..................................................................................................55
7 Conference Control.....................................................................................................................59
7.1 Customizing the Displayed Conference Controls ..........................................................................................59
7.2 Performing Conference Control.....................................................................................................................60
8 Video and Audio .........................................................................................................................65
8.1 Adjusting Video Display Effects ....................................................................................................................65
8.1.1 Adjusting Picture Offset........................................................................................................................65
8.1.2 Adjusting the Sampling Phase...............................................................................................................66
8.1.3 Setting Video Parameters......................................................................................................................66
8.1.4 Customizing the Onscreen Status Icons................................................................................................69
8.2 Adjusting Audio Effects .................................................................................................................................70
8.3 Adjusting the Local Volume...........................................................................................................................71
8.4 Adjusting the Screen Layout ..........................................................................................................................71
8.5 Selecting Video Sources.................................................................................................................................72
8.6 Hiding the Local Video ..................................................................................................................................72
9 Captions ........................................................................................................................................74
9.1 Specifying Caption Settings...........................................................................................................................75
9.2 Creating a Caption..........................................................................................................................................76
9.3 Sharing a Caption...........................................................................................................................................76
9.4 Sending an Instant Message ...........................................................................................................................77
10 Security........................................................................................................................................78
10.1 Security Features..........................................................................................................................................78
10.2 Configuring Security Settings ......................................................................................................................79
10.2.1 Setting the Administrator Password....................................................................................................79
10.2.2 Enabling Encryption ...........................................................................................................................80
10.2.3 Allowing Remote Login......................................................................................................................80
10.2.4 Setting the Upgrade Password ............................................................................................................82
11 Web-based Remote Management ..........................................................................................83
11.1 Enabling Web-based Login ..........................................................................................................................83
11.2 Configuring the Web Browser......................................................................................................................84

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Contents
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi
11.3 Logging In to the Endpoint Web Interface ...................................................................................................84
11.4 Getting to Know the Web Interface Functions .............................................................................................85
11.4.1 Importing and Exporting the Address Book........................................................................................86
11.4.2 Importing and Exporting Settings .......................................................................................................87
11.4.3 Importing License Files.......................................................................................................................87
11.4.4 Customizing Shortcut and Desktop Icons ...........................................................................................88
11.4.5 Accessing the Site Map .......................................................................................................................88
11.4.6 Using the Site List...............................................................................................................................88
11.4.7 Conference Control Page ....................................................................................................................88
11.4.8 Importing a Certificate ........................................................................................................................90
11.4.9 Recording a Conference......................................................................................................................90
11.4.10 Backing Up Settings..........................................................................................................................91
11.4.11 Capturing Photos...............................................................................................................................91
12 Troubleshooting........................................................................................................................93
12.1 Web Interface ...............................................................................................................................................93
12.2 Network........................................................................................................................................................94
12.3 Video............................................................................................................................................................95
12.4 Audio............................................................................................................................................................98
12.5 Conference Initiation....................................................................................................................................99
12.6 Conference Control ....................................................................................................................................101
12.7 Viewing Help on the User Interface ...........................................................................................................102
12.8 Obtaining Technical Support......................................................................................................................102
13 Maintenance.............................................................................................................................103
13.1 Preventive Maintenance.............................................................................................................................103
13.1.1 Checking the Working Environment Periodically.............................................................................103
13.1.2 Checking the Cables Periodically .....................................................................................................104
13.1.3 Viewing the System Status................................................................................................................104
13.1.4 Viewing the System Information.......................................................................................................105
13.1.5 Querying Logs ..................................................................................................................................105
13.2 Software Upgrade.......................................................................................................................................106
13.2.1 Automatic Upgrade ...........................................................................................................................107
13.2.2 Upgrading the TE30 Locally.............................................................................................................107
13.2.3 Upgrading the TE30 Using the Bootroom System............................................................................ 111
13.2.4 Upgrading the TE30 from the Web Interface .................................................................................... 111
13.3 Restoring Default Settings.......................................................................................................................... 112
13.4 Configuring the NTP server........................................................................................................................113
13.5 Setting the Sleep and Wakeup Mode.......................................................................................................... 113
13.6 Setting the Number Key Functions ............................................................................................................115
13.7 Using Diagnostics Methods ....................................................................................................................... 115
A Safety Precautions....................................................................................................................118

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Contents
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vii
B Technical Specifications .........................................................................................................124
C Videoconferencing Room Layout .........................................................................................128
D Default Settings .......................................................................................................................129
E Terminology ..............................................................................................................................130
F Acronyms and Abbreviations.................................................................................................137

HUAWEI TE30 Videoconferencing Endpoint
User Guide
1 Product Introduction
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1 Product Introduction
The TE30 is a compact, easy to install, and easy to use videoconferencing endpoint designed
by Huawei.
The TE30 is an all-in-one endpoint incorporating a digital camera and stereo microphone. It is
ready for video communication as soon as it is powered on and connected to a network. The
TE30 is suitable for executive personnel who want to attend video conferences from their
executive offices or small conference rooms as well as home users.
HD Video
The TE30 supports HD video with the following resolutions:
720p (1280 x 720 pixels and progressive scanning)
1080p (1920 x 1080 pixels and progressive scanning)
H.239 Dual Stream
Your TE30 complies with the H.239 standard and supports concurrent transmission of
two video channels.
A presentation can either be a video or computer desktop content.
A presentation can be displayed independently or on the same display as the video.
Multiple Conferencing Modes
Point-to-point conference
Multipoint conference
Joining a conference as the called party
One press to join conference
Joining a conference by dialing two required numbers
Voice dialing with Chinese and English support
UI
Multiple languages
Rich operation hints and statistics

HUAWEI TE30 Videoconferencing Endpoint
User Guide
1 Product Introduction
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
Network Features
Maximum call bandwidth: 4 Mbit/s
IP-based network
Packet loss concealment
Wi-Fi capable

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
2 Installation and Initial Configuration
About This Chapter
Install and configure your TE30 before use.
2.1 Installing Your TE30
Your TE30 offers multiple installation options. You can use any of them for quick
deployment.
2.2 Connecting Cables
Connect cables to your TE30 before using it for conferencing.
2.3 Powering On and Off
With all cables connected to the TE30, power it on.
2.4 Using the Wizard
The Wizard helps to set the general, network, and camera parameters on your TE30 quickly
and conveniently.
2.1 Installing Your TE30
Your TE30 offers multiple installation options. You can use any of them for quick
deployment.
For details about your TE30 installation options and instructions, see the HUAWEI TE30
Videoconferencing Endpoint Quick Start Guide provided with your TE30.
2.2 Connecting Cables
Connect cables to your TE30 before using it for conferencing.
Please refer to the HUAWEI TE30 Videoconferencing Endpoint Quick Start Guide to
familiarize yourself with the TE30 rear ports. This helps you connect cables.
Refer to Figure 2-1 to connect cables to your TE30.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Figure 2-1 Connecting cables
In Figure 2-1:
Video input: Use the built-in camera in your TE30 as the video input source. Your TE30
cannot be connected to external cameras.
Presentation input: Use a VGA cable to connect the TE30 VGA IN port to a computer
VGA out port.
Audio input: Use the built-in microphone.Alternatively, use the 10 m proprietary cable
provided by a VPM220 microphone array to connect the integrated cable HD-AI
connector and the VPM220.
Computer audio input: Use a 3.5 mm audio cable to connect the TE30 LINE IN port to a
computer audio output port.
Video and audio output: Connect the provided integrated cable to the TE30
MIC/TV/LAN/POWER port and use an HDMI cable to connect the HDMI connector to
the monitor HDMI input port.
Presentation output: Use a VGA cable to connect the TE30 VGAOUT port to a projector
VGA out port.
LAN connection: Use the provided network cable to connect the integrated cable LAN
connector to the network port of a network device.
Power supply: Use the provided power cable and power adapter to connect the integrated
cable power connector to the power socket.
The VGA and 3.5 mm audio cables are not provided with your TE30. You need to purchase the
cables of the same model by yourself.
The 10 m proprietary cable is provided as standard with the VPM220, and the integrated cable is
provided as standard with the TE30.
The cable connection described in this section is provided only for reference.
2.3 Powering On and Off
With all cables connected to the TE30, power it on.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
When your TE30 is powered on, ensure that the power cable is connected to the TE30
securely to prevent power disconnection.
Before isolating your TE30 from its external power supply (for example, the power supply
from a power socket) and removing the power cable, power off the TE30 properly.
Check whether the power cable and power adapter are correctly connected to the relevant
devices. Ensure that:
The AC power supply voltage is at 50 Hz or 60 Hz within the 100-240 V range.
The sequence of and voltage difference between the live wire, neutral wire, and ground
wire comply with the relevant international standards. In addition, ensure that the ground
wire is properly grounded.
With all cables connected correctly, use the power adapter to connect the TE30 to a power
supply. The power adapter indicator then comes on, and the TE30 is automatically powered
on.
Table 2-1 describes the TE30 indicator status.
Table 2-1 Indicator status
Indicator
Status
TE30 Status
Blinking
green
Starting
Steady green
Operating correctly
Blinking red
Encountered a fault, such as a self-check error, overheating, and software
malfunction
Blinking
orange
Sleeping
Steady orange
Being powered off
Off
Powered off
The OLED display shows the IP address, site number, and indications for startup, upgrade,
sleep mode, and malfunction. Table 2-2 describes the content shown on the OLED display.
Table 2-2 OLED display content
When the TE30
Is...
OLED Display Shows...
Starting
Message "Booting..."
Operating
IP address and site number of the TE30 in turn at 10 seconds intervals

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
When the TE30
Is...
OLED Display Shows...
correctly
Being updated
Message "Downloading" during software downloading
Message "Updating" during software updates
Sleeping
Message "Standby"
Malfunctioning
Indications that signify fan running stop, overheating, or other
faults
Hexadecimal error code following each indication
Press on the remote control, select Shut Down, and follow the onscreen instructions to
power off your TE30.
2.4 Using the Wizard
The Wizard helps to set the general, network, and camera parameters on your TE30 quickly
and conveniently.
Background
When configuring the TE30 for the first time, you can use the Wizard. For details, see the
HUAWEI TE30 Videoconferencing Endpoint Quick Start Guide.
If a USB flash drive is provided with your TE30, you can also load the configuration file on
the USB flash drive to configure your TE30. For details, see the HUAWEI TE30
Videoconferencing Endpoint Quick Installation Guide.
Procedure
Step 1 Choose Advanced Settings > Settings > Installation > Wizard.
The General screen is displayed.
Step 2 Set the general parameters according to Table 2-3 and Table 3-1.
Table 2-3 General parameters
Parameter
Description
Setting
Site name
Specifies the site name you want to be
superimposed on the video of your site
when it displays to other sites.
When your site joins a multipoint
conference, this site name is displayed in
the site list.
The default value is site.
Language
Specifies the language for the remote
The default value is English.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Parameter
Description
Setting
controlled UI.
Time zone
Specifies the time difference between the
local time and the Greenwich Mean
Time (GMT).
Your TE30 automatically sets this
parameter based on your settings of
Location.
The default value is
(GMT+08:00) Beijing,
Chongqing, Hong Kong,
Urumqi.
Your TE30 automatically sets
this parameter based on the
value set for Location.
Time format
Specifies the format in which time is
displayed.
The default value is 24-hour.
NMS server
Specifies the IP address of the HUAWEI
SMC 2.0.
After you set this parameter and
Connection type, Local IP address,
Subnet mask, and Gateway address,
your TE30 automatically attempts to
obtain the HUAWEI SMC 2.0 settings.
After it obtains the configuration, it
displays the conferencing screen.
NOTE
This parameter is available on the General
screen only when you are configuring the
TE30 for the first time.
For details, contact the local
reseller or operator.
Step 3 Select Next. Set the H.323 parameters by referring to Table 3-2.
Step 4 Select Next. Set the Session Initiation Protocol (SIP) parameters by referring to Table 3-3.
Step 5 Select Next. Set the video input parameters by referring to Table 4-5.
Step 6 Select Save.
----End
Follow-up Procedure
To set date and time parameters listed in Table 2-4, choose Advanced Settings > Settings >
General > Date and time.
Table 2-4 Date and time parameters
Parameter
Description
Setting
Location
Specifies the country or area where
your TE30 is located.
When you set this parameter, your
TE30 automatically adjusts the value
of the Time zone parameter.
The default value is China.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Parameter
Description
Setting
Adjust time
automatically
based on DST
Specifies whether to adjust the
endpoint clock based on local
observance of Daylight Savings Time
(DST).
If this function is enabled, the endpoint
clock is automatically adjusted one
hour forward.
NOTE
The presence of this parameter is
controlled by your settings of Time zone.
This parameter is available for countries
and regions that support DST.
This parameter is deselected
by default.
Date format
Specifies the format in which the date
is displayed.
The default value is
YYYY/MM/DD.
Enable NTP
Specifies whether to automatically
synchronizes system time with a
Network Time Protocol (NTP) server
at an interval of 300 seconds.
NOTE
If you set this parameter to Enable NTP,
you must also set NTP server address.
This parameter is deselected
by default.
NTP address
type
Specifies the mode for your TE30 to
obtain the NTP server IP address.
Auto: Your TE30 automatically
obtains the NTP server IP address.
Manual: You must manually set
the NTP server IP address.
This parameter is available only when
Connection type is set to Dynamic
IP.
NOTE
For details about how to set Connection
type, see 3.1 Setting IP Parameters.
The default value is Manual.
NTP server
address
Specifies the NTP server IP address.
No default value is set for this
parameter.
To set custom parameters listed in Table 2-5, choose Advanced Settings > Settings >
Display > Personalize.
Table 2-5 Custom parameters
Parameter
Description
Setting
Transparenc
y
Specifies the transparency of the
background photograph of the menu
screen.
The default value is 15%.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
2 Installation and Initial Configuration
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Parameter
Description
Setting
If you set the parameter to Opaque, no
background photograph is displayed on
the menu screen.
If you st this parameter to values other
than Opaque, a background photograph
is displayed behind the menu screen with
a degree of transparency corresponding
to the value chosen.
Display IP
address
Specifies whether to display the local IP
address on the conferencing screen.
This parameter is selected by
default.
Select
conference
control
operation
Specifies the conference controls to
display on the Conference Control
screen.
-
Display
position
Specifies the display position for the site
name superimposed on the local video.
The default value is Lower
right corner.
Display
duration
Specifies the duration to display the site
name.
The default value is Always
display.
Display time
and zone
Specifies whether to superimpose the
time zone and time on the video of your
site after your site joins a conference.
This parameter is deselected by
default.
Font color
Specifies the color in which the site
name is displayed.
The default color is white.
Font size
Specifies the font size for the site name
display.
The default value is Medium.
Font Type
Specifies the typeface for the site name.
This parameter is available only when
Language is set to 中文(简体).
The default value is Boldface.
Bold
Specifies whether the site name is
displayed in bold.
This parameter is deselected by
default.
Set the
horizontal
offset
Fine-tunes the site name's location
leftward and rightward on the video.
Value range: 0-96.
The default value is 48.
Set the
vertical
offset
Fine-tunes the site name's location
upward and downward on the video.
Value range: 0-96.
The default value is 48.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
3 Network
About This Chapter
With network settings configured correctly, your TE30 can properly communicate with other
network devices.
3.1 Setting IP Parameters
To use your TE30 on an IP network to implement video communication, correctly set IP
parameters, which include DNS server address, network interface mode, and gateway address.
3.2 Setting H.323 Parameters
When an H.323 network gatekeeper (GK) is used on your videoconferencing system, set the
H.323 parameters.
3.3 Setting SIP Parameters
To prepare your TE30 for video communication using SIP, set SIP parameters, which includes
whether to register with a SIP server.
3.4 Setting Wi-Fi Parameters
To use your TE30 to implement video communication over a Wi-Fi network, configure the
Wi-Fi settings.
3.5 Setting QoS Parameters
The quality of service (QoS) settings determine the mode for processing IP data packets in a
conference.
3.6 Setting Firewall Parameters
With the firewall settings correctly configured, video conferences held using your TE30 are
secure.
3.7 Setting Network Diagnostics Parameters
Correct settings on the ports used for diagnostics enable you to use a network diagnostics tool
to diagnose your TE30 using the ports.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
3.1 Setting IP Parameters
To use your TE30 on an IP network to implement video communication, correctly set IP
parameters, which include DNS server address, network interface mode, and gateway address.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > IP > IP. Set the IP parameters by
referring to Table 3-1.
Table 3-1 IPparameters
Parameter
Description
Setting
IPv6
Specifies whether IPv6 is used. If you
use IPv6, you must also set Connection
type, Local IP address, Subnet prefix
length, and Gateway address.
This parameter is deselected by
default.
DNS server
address
Specifies the IP address of the active
Domain Name System (DNS) server.
After you set this parameter, domain
names can be used as the addresses of
network gatekeeper (GK) and Session
Initiation Protocol (SIP) servers. The
DNS server will translate the domain
names into the IP addresses of the GK
and SIP servers.
Example: 202.98.192.67
Alternate
DNS server
IP address
Specifies the IP address of the standby
DNS server. The standby DNS server is
used when the active DNS server is
unavailable or responds slowly.
Example: 202.98.198.167
Network
interface
mode
Specifies the working mode for the
network ports on your TE30.
Auto detection: When accessing the
network, your TE30 automatically
negotiates with a remote network
device to determine the optimal work
mode.
10 Mbps and half duplex: The data
transmission rate is 10 Mbit/s, and
data cannot be sent and received at
the same time.
10 Mbps and full duplex: The data
transmission rate is 10 Mbit/s, and
data can be sent and received at the
same time.
100 Mbps and half duplex: The data
transmission rate is 100 Mbit/s, and
data cannot be sent and received at
the same time.
100 Mbps and full duplex: The data
The default value is Auto
detection.
NOTE
If the remote network device you
wish to communicate with has its
network interface mode set to 10
Mbps and full duplex or 100
Mbps and full duplex, set this
parameter to be the same as the
remote network interface mode.
Otherwise, communication will
fail.

HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
Parameter
Description
Setting
transmission rate is 100 Mbit/s, and
data can be sent and received at the
same time.
PPPoE
Specifies whether your TE30 accesses
broadband networks using dial-up
connections.
NOTE
If you set this parameter to Enable, you must
also set Dialing mode, User name, and
Password.
The default value is Disable.
Dialing
mode
Specifies the dial-up connection mode.
The dial-up process complies with the
Point-to-Point Protocol over Ethernet
(PPPoE) protocol. To use a dial-up
connection, in User name and
Password, enter the user name and
password that are provided by your
broadband access service provider.
Auto: When your TE30 starts, it
automatically sets up a dial-up
connection over the IP network. If the
dial-up service is not free of charge,
charging starts when the dial-up
connection is established.
Manual: Your TE30 uses the dial-up
program to access the network.
Choose Advanced Settings >
Utilities > PPPoE Dialing >
Connect and set up a PPPoE dial-up
connection.
The default value is Auto.
Connection
type
Specifies the mode for your TE30 to
obtain an IP address.
Static IP: The network administrator
assigns an IP address to your TE30. If
you select this option, you must also
set Local IP address, Subnet mask,
and Gateway address.
Dynamic IP: When a DHCP server is
available on the network, your TE30
automatically obtains an IP address
using the Dynamic Host
Configuration Protocol (DHCP).
The default value is Static IP.
If you have set NMS server,
select Static IP for this
parameter.
Local IP
address
Subnet mask
Specifies the IP address and subnet mask
of your TE30.
Contact the network
administrator.
Examples:
IPv4 address: 192.168.1.10
IPv6 address:
2000:0:0:0:200:55:26:1