VANDAL RESISTANT BOLLARD-LED™- VRB-LED
Installation Instructions
Page 2 Kim Lighting • 1 6555 E. Gale Ave. • P. . Box 60080 • City of Industry, CA 91 71 6-0080 • 626/968-5666 • FAX 626/330-3861
5. Pull fixture wires out from inside of
riser and make connections to field
wires i.e., green-to-ground, white-
to-common and black-to-voltage.
6. Place pole body over base casting
and slowly turn until it drops into
retaining slots. Then, twist
clockwise 45 degrees to lock pole
onto base casting.
7. Tighten two 3/8" set screws at the
bottom of the pole using a 3/1 6"
hex key.
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with KIM Installation Instructions and accepted trade practices, the following shall apply:
General Product Limited Warranty Covera e
All material and component parts used in the manufacture of KIM products, are warranted to be free from defects of
material and / or workmanship for a period of 1 year from date of sale, with the following exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts and transformers) provided by and / or included in KIM products shall
carry the component manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze landscape fixture components shall be warranted against defects of material and / or workmanship
and failure due to corrosion for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be warranted against defects of material and / or
workmanship and failure due to corrosion for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum landscape fixture components not in direct contact with soil, shall be warranted against defects of material
and / or workmanship for a period of 3 years from date of sale. Aluminum fixture components in direct contact with soil
shall be warranted from defects of material and failure due to corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
nly products which are installed, used and maintained in accordance with applicable KIM instructions, specifications
and accepted trade practices are covered by the KIM warranty. During the warranty period, with proof of purchase, KIM
will repair or replace with the same or similar product, at KIM's option, without charge. Labor costs are the owners
responsibility and are excluded from this warranty. This warranty is void if the product is modified, tampered with,
misapplied, poorly installed, improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser. This warranty is in lieu
of all other warranties expressed or implied, including any implied warranty of fitness for a particular application. KIM
Lighting shall not be liable to the purchaser for indirect or consequential damages.
