HunterDouglas RB 500 User manual

Push the blind against the bearing and slide it out
of the bracket.
5-211 Series-Chain Operation
Installation InstructionS
RB 500 Manual Roller Shades
Heavy Duty Clutch System
Open both fasteners of the bracket ring. Turn the
blind in the roll up direction until the front plate gets
out of the bracket ring.
Lift the backside of the end cap and slide it towards
you.
Unfasten the locking ring.
Removal
2
1
2
1
1

1
2
2
1
a
c
b
click
click
click
Slide the screw cover onto the bracket until it snaps.
Open the fastener on the bracket adapter (A).
Install the bracketswith the screws provided.
a)recess b)ceiling c)wall
Place the roller shade with the idle end onto the
bracket. Push the shade against the idle end and lift
the shade up with the chain facing straight down...
Fix the roller shade by turning the locking ring
against the idle end.
Slide the end caps onto the brackets. Make sure that
the end caps snap onto the brackets.
XQWLOWKHIURQWSODWHRIWKHFOXWFK¿WVWKHEUDFNHW
ring. Turn the roller shade (10°) in the rolling off di-
rection and close both fasteners of the bracket ring.
To adjust skewing, put the provided Allen key into
the screw of the leveler and turn it left or right to
move the shade up and down. Support lifting of large
heavy roller shades with the palm of your hand.
Installation Option: Leveler
Make sure that the opening for the Allen key is
pointing downwards before installing the brackets.
Change the orientation by loosening the 4 screws
(M5 x 8) and turning the leveler 90°. Fix the screws.
2
A

1
2
2
1
a
c
b
click
click
click
Slide the cover cap onto the bracket until it snaps.
The fasteners of the bracket ring must be open.
Fix the bracket with the screws provided.
a recess b ceiling c wall
Place the roller shade with the idle end onto the
bracket. Push the shade against the idle end and lift
the shade up ...
Secure the shade by turning the locking ring
furthest away from the bracket.
Attach the bracket covers onto the brackets. Make
sure the bracket covers snap onto the brackets.
...line up teeth RIWKH FOXWFK with bracket adapter(A).
Insert clutch into bracket, turn shade (10°) in the rolling
off direction(1), and close fastener on the bracket adapter.
To adjust skewing, put the provided Allen key into
the screw of the leveler and turn it left or right to
move the shade up and down. Support lifting of large
heavy roller shades with the palm of your hand.
Installation Option: Leveler
Make sure that the opening for the Allen key is
pointing downwards before installing the brackets.
Change the orientation by loosening the 4 screws
(M5 x 8) and turning the leveler 90°. Fix the screws.
3
A

1
2
2
1
a
c
b
click
click
click
Slide the cover cap onto the bracket until it snaps.
The fasteners of the bracket ring must be open.
Fix the bracket with the screws provided.
a recess b ceiling c wall
Place the roller shade with the idle end onto the
bracket. Push the shade against the idle end and lift
the shade up ...
Fix the roller shade by turning the locking ring
against the idle end.
Slide the end caps onto the brackets. Make sure that
the end caps snap onto the brackets.
XQWLOWKHIURQWSODWHRIWKHFOXWFK¿WVWKHEUDFNHW
ring. Turn the roller shade (10°) in the rolling off di-
rection and close both fasteners of the bracket ring.
To adjust skewing, put the provided Allen key into
the screw of the leveler and turn it left or right to
move the shade up and down. Support lifting of large
heavy roller shades with the palm of your hand.
Installation Option: Leveler
Make sure that the opening for the Allen key is
pointing downwards before installing the brackets.
Change the orientation by loosening the 4 screws
and turning the leveler 90°. Reinstall the screws.
4

2
1
2
1
Push the roller shade against the idle end and slide
it out of the bracket.
Type 5-211
Installation Instruction
Roller Shade
Chain Operation
Open fastener on the bracket adapter. Turn the
roller shade 10° in the roll up direction(1). Pull
clutch out of the bracket adapter (2).
Lift the backside of the end cap and slide it towards
you.
Unfasten the locking ring.
Removal
5

2
1
2
1
Push the roller shade against the idle end (1)and slide
it out of the bracket (2).
Type 5-211
Installation Instruction
Roller Shade
Chain Operation
Open both fasteners of the bracket ring. Turn the
roller shade in the roll up direction until the front
plate gets out of the bracket ring.
Lift the backside of the end cap and slide it towards
you.
Unfasten the locking ring.
Removal
6