Ingenico PAYZONE iCT250 User manual

Get in touch
01472 255 750
Read me first
Payzone iCT250 Terminal
Installation Guide
S
M
A
L
L
B
U
S
I
N
E
S
S
E
S
We hope you enjoy
using your new Payzone
iCT250 Terminal!
iCT250

A Quick Guide to Your New
Payzone iCT250 Terminal
Hello…
welcome to Payzone, glad to have
you on board.
What’s inside…
Plugging in the power supply
Connect the correct connection
Going through installation steps
Need More Help?

Let’s get you started
Step 1 - Plugging in the power supply
Plug the power supply into the junction box in the circular connection, as
per below;
Step 2 - Establish how the terminal needs to be set up (Phone Line or Broadband)
Decide how you would like to use the machine, either through the phone
line or broadband?
Step 3 - Connect the correct connection method
Phone Line
Connect the phone line into the below port (labelled with ‘phone symbol
and IN’on the junction box), shown below.
Power Supply
Phone Line

Broadband
Connect the Ethernet cable into the broadband router and the other end into
the port (labelled ‘ETH’), shown below.
Step 4 - Going through the installation mode steps
Phone Line Connection
Does the Tel. Line have
Call Waiting or 1571?
Enter=Yes Clear=No
Press ENTER on
Telephone(PPP).
Is there call waiting or
1571?
Type in the *6 digit
Payzone Merchant
number and press ENTER.
Press ENTER.
Is there a dial prefix on
the line?
The terminal will then
dial GEMS.
Terminal Installation
Plug in Phone Line
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
and then press ENTER
Dial Prefix Required?
Enter=Yes Clear=No
Dialing GEMS
Tel: [phone]
DPP 100 Prefix NONE
Please Wait…
1
4
2
5
3
6
Ethernet port
Connection method
Telephone(PPP)
Local Network
Once this has been completed the terminal will display the READY prompt
showing the merchant number. Please try a test transaction of 1p to ensure
the terminal is fully installed.
*6 digit Payzone Merchant number can be found on your ‘Payzone Welcome’
email.

Broadband Connection
Dialing GEMS
Tel: [phone]
DPP 100 Prefix NONE
Please Wait…
Press ENTER on local
network.
The terminal will then
dial GEMS.
Press ENTER.
Type in the *6 digit
Payzone Merchant
number and press ENTER.
Terminal Installation
Plug in Newtork
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
and then press ENTER
1
4
2 3
Connection method
Telephone(PPP)
Local Network
Once this has been completed the terminal will display the READY prompt
showing the merchant number. Please try a test transaction of 1p to ensure
the terminal is fully installed.
*6 digit Payzone Merchant number can be found on your ‘Payzone Welcome’
email.

0018 • BSG • PZ iCT250 V1 • 01/17
We’re here to help.
For any installation queries, please get in touch with
our installation team on:
01472 255 750
Opening Hours: Monday – Thursday 08:30am - 19:30pm
Friday 08:30am - 17:00pm.

Get in touch
01472 255 750
Keep updated…
www.payzone.co.uk