Ironwood DTO29-47-56 User manual

1207
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
DTO29-47-56
DESKTOP ORGANIZERS

PARTS DIAGRAM
C
D
B
Right Side 05762042 1 ea.
G
A
Left Side 05762042 1 ea.
H1
DTO 29
– Minifix Cam
DTO 47 – Minifix Cam
DTO 56 – Minifix Cam
909810
909810
909810
10 ea.
10 ea.
11 ea.
HARDWARE
H2
DTO 29 – Minifix Bolt
DTO 47 – Minifix Bolt
DTO 56 – Minifix Bolt
909834
909834
909834
10 ea.
10 ea.
11 ea.
H4
DTO 29
– Rafix Cam
DTO 47
– Rafix Cam
DTO 56
– Rafix Cam
909910
909910
909910
8 ea.
12 ea.
12 ea.
H5
DTO 29
– Rafix Bolt
DTO 47
– Rafix Bolt
DTO 56 – Rafix Bolt
909923
909923
909923
8 ea.
12 ea.
12 ea. H6
DTO 29
– Shelf Divider
DTO 47
– Shelf Divider
DTO 56 – Shelf Divider
H10100
H10100
H10100
4 ea.
8 ea.
10 ea.
DTO 29 – Top
DTO 47
– Top
DTO 56 – Top
05762001
05761901
05761801
1 ea.
1 ea.
1 ea.
H3 Dowel 195000 6 ea.
DTO 29 – Back
DTO 47
– Back
DTO 56 – Back
05762052
05761952
05761852
1 ea.
1 ea.
1 ea.
DTO 29 – Adjustable Shelf
DTO 47
– Adjustable Shelf
DTO 56
– Adjustable Shelf
05762024
05761924
05761824
2 ea.
2 ea.
2 ea.

ASSEMBLE DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge of
the cam should be facing the edge
of the panel.
Slide Rafix Cams of the panel to be
attached onto the corresponding posts.
Using a #3 Phillips screwdriver, turn the
rotating portion of the Rafix Cam a 1/2
turn clockwise to secure. IMPORTANT!
Do not exceed 1/2 turn when tightening
cams. Turn 1/2 turn counterclockwise
to disassemble and remove panel.
When screwing post
into hole, Do Not
over tighten. Screw
post down until
bottom face of post
flange just touches
board surface.
Flat
edges
must be
aligned
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.

Insert 6 Minifix Cams
(H1) into Back (D).
Insert 2 Minifix Cams
(H1) into each Side (A
& B). Screw in 2 Minifix
Bolts (H2) on each
side as shown.
#1
H1
H1
AB
H1
H2
H1
H2
H2
Screw in 6 Minifix
Bolts (H2) and tap
in 6 Wood Dowels
(H3) into Top (C)
as shown in
diagram.
#2
C
H2 H3
H3
H2
H3 H2
H3
H2
H4
#3
D
H1
H1 H1
THESE HOLES
WILL NOT BE
ON DTO29
THESE HOLES
WILL NOT BE
ON DTO29
#4
G
Tap in 6 Rafix Cams (H4) into
Each of the 2 Adjustable
Shelves (G). Tap Rafix Cams
until fully seated.
NOTE: Position as shown, Rafix
Cams cannot be repositioned if
installed incorrectly.
Flat
edges
must be
aligned
NOTE: On the DTO56 there will be 1 additional Minifix Bolt on long edge.
NOTE: On the DTO56 there will be 1 additional Minifix Cam on the top edge.
NOTE: On the DTO29 there will only be 4 Rafix Cams on each of the Shelves.

#5
Position Right Side (B)
onto Back (D) as
shown. Turn Minifix
Cams (H1) clockwise
to secure.
D
B
H1
H1
#6
Position Left Side (A)
onto Back (D) and turn
Minifix Cams (H1)
clockwise to secure.
A
D
B
H1
H1
#7
Position Top C onto Sides
(A & B) and Back (D) as
shown and secure by
turning connecting Minifix
Cams (H1) clockwise.
AD
B
C
H1 H1
H1
H1

#8
Select the position for each of
the 2 Adjustable Shelves (G).
Screw in Rafix Bolts (H5) into
Sides (A & B) and Back (D).
Make sure the Rafix Bolts are
in the same position on all
sides of unit for each shelf.
Turn each of the Rafix Cams
(H4) on the bottom of the
shelves 1/2 turn to secure.
G
#9
Slide on appropriate
number of Shelf Dividers
(H6) for your unit.
Arrange in desired
positions for your use.
Assembly of your Desktop Organizer is now complete.
H5