Ironwood MODULAR M2436 User manual

M2436 M2448 M2460
M2472 M3036 M3048
M3060 M3072
MODULAR SERIES
2400/3000 DESK SHELLS
All the desk shells assembled in
the same manner. The M2460
Desk Shell is shown here.
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
03/07

B
Right Side – M24XX
Right Side – M30XX
02310141
02310541
1 ea.
1 ea.
PARTS DIAGRAM
A
Left Side – M24XX
Left Side – M30XX
02310141
02310541
1 ea.
1 ea.
C
Top – M2436
M2448
M2460
M2472
M3036
M3048
M3060
M3072
02310101
02310201
02310301
02310401
02310501
02310601
02310701
02310801
1 ea.
D
Back – M2436
M2448
M2460
M2472
M3036
M3048
M3060
M3072
02310152
02310252
02310352
02310452
02310152
02310652
02310752
02310452
1 ea. 195000
H4 Leveler Bracket 402302 4 ea.
H5 Leveler 300870 4 ea.
H3 Leveler Insert 274650 4 ea.
H2 Wood Dowel 4 ea.
H1 Minifix Bolt
909834
M2436, M3036
M2448, M3048
M2460, M3060
M2472, M3072
14 ea.
16 ea.
17 ea.
H7 Grommet
286580
M2436, M2448
M2460, M3036
M2472, M3048
M3060, M3072
2 ea.
4 ea.
H6 Minifix Cam
909810
M2436, M3036
M2448, M3048
M2460, M3060
M2472, M3072
14 ea.
16 ea.
17 ea.

Place the Top (C) on a clean, carpeted
surface with the pre-drilled holes facing
up. Screw ten Minifix Bolts (H1) and
insert four Wood Dowels (H2) into the
Top (C) where indicated.
#1
H1
H2 H1 H2 H1
Install Leveler Inserts (H3) into the bottom holes of Left Side Panel and Right Side Panel (B).
Using a plastic mallet, tap until flush with the surface. Press a Leveler Bracket (H4) over each
Leveler Insert. Screw the Levelers (H5) into the Leveler Inserts. Adjust the Levelers when
the finished unit is in place.
#2
H1
H2
H5
H3 H4
A B
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.

Attach the Left Side
(A) and Right Side (B)
to the Back (D) as
shown. Turn the
Minifix Cams (H6)
clockwise to tighten.
#5
H6
H6
D
A
B
Insert six Minifix Cams
(H6) into each Side Panel
(A & B) with the arrow of
the cams facing out.
#3
Screw six Minifix
Bolts (H1) and insert
Minifixcams (H6)
into the Back (D)
where indicated.
#4
H6
H1 H1
D
H6 H6
A B
H6
H6 H1

Insert Grommets (H7) into the
cutouts in the Top and Back.
#7
H7
H7
With the assistance of
another person, place the
Top (C) onto the assembly
as shown and turn the Cams
(H6) clockwise to tighten.
#6
D
C
A
B
H6
H6
H6
The unit is now fully assembled
and ready for use or connection
to other Modular Series Units.
#8