Ironwood Glacier HHW32 User manual

01/06
HHW32/HHW39
HALF HEXAGON
WORKSTATION
HHW32
HHW39
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
BY

PARTS DIAGRAM
AB
Leftside - HHW32
Leftside - HHW39
01070141
01070241 1 ea. Rightside - HHW32
Rightside - HHW39
01070141
01070241 1 ea.
C
D
Top - HHW32
Top - HHW39
01070101
01070101 1 ea.
Back - HHW32
Back - HHW39
01070152
01070152 2 ea.
J
Brace - HHW32
Brace - HHW39
01070198
01070189 2 ea.
G
Shelf - HHW32
Shelf - HHW39
01070127
01070127 1 ea.

H1 Minifix Bolt 909834 24 ea.
H5 Leveler 300870 4 ea.
H3 Minifix Cam 909810 24 ea.
H2 Wood Dowel 195000 20 ea.
H8 #8 x .75"
Panhead Screw 901208 16 ea.
H4 Leveler Insert 274650 4 ea.
H6 Grommet Liner 286580 2 ea.
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
H7 Attachment
Plate 411270 1 ea.
HARDWARE

Place the Top (C) on a clean,
carpeted surface as shown.
Screw eight Minifix Bolts (H1)
into the Top where indicated.
Insert four Dowels (H2) into
the pre-drilled holes of the
Top where indicated.
#1
C
H2 H1 H1 H2
Insert six Minifix Cams (H3)
into the Shelf (G) with the
arrows of the cams facing out.
Screw two Minifix Bolts (H1)
into the other side of the Shelf
where indicated.
#3
Insert six Minifix Cams (H3)
into each Back (D) with the
arrows of the cams facing out.
#2
D
H3 H3
D
H3 H3
G G
H3
H1
H3
H1
H2
H3
#4
Insert three Minifix Cams
(H3) into the Left Side (A)
and Right Side (B) where
indicated with the arrows of
the cams facing out.
AB
H3 H3
H3

#5
Screw seven Minifix Bolts
(H1) and insert two Dowels
(H2) into each Side (A & B)
where indicated.
AB
H2
H1
H2
H1
H1
Insert six Dowels (H2) into the
indicated holes of each Brace
(J) as shown.
#7
J
H2
#6
H5
H4
H2
Using a plastic mallet, tap
Leveler Inserts (H4) until flush
with the surface in the bottom
edges of the Left Side (A) and
Right Side (B) as shown.
Screw the Levelers (H5) into
the Leveler Inserts.
Adjust the Levelers after
assembly is complete and
the unit is in place.

#8
Position a Back (D) onto the
Shelf (G) as shown. Rotate the
arrows of the Minifix Cams (H3)
of the Back clockwise to secure
in place as shown.
#9
Position the assembly and the
other Back (D) onto the
corresponding bolts of the Left
Side (A) as shown. Rotate the
arrows of the Minifix Cams (H3)
of the Shelf (G) and the Backs
clockwise to secure in place.
Position the Right Side (B)
onto the assembly as
shown. Turn the arrows of
the Minifix Cams (H3) of the
Shelf (G) and Backs (D)
clockwise to secure in place.
#10

With the assistance of another
person, turn the assembly upright.
Press a Brace (J) into the pre-
drilled holes of the Left Side (A)
and Right Side (B) a shown until
firmly seated in place.
#11
#12
Position the Top (C) onto the
Left Side (A), Right Side (B),
and the upper Back (D) as
shown. Turn the arrows of the
Minifix Cams (H3) clockwise to
secure in place.
#13
Insert the Grommets (H6) into
the Top (C) and the Shelf (G).
H6
C
G
Your Glacier Half Hexagon Workstation is
now fully assembled and ready for use.

1. Position the two
Workstations with the long
edges of the tops together.
2. Align the tops together.
Adjust the Levelers (H5) to level
both Workstations at the same
height.
CONNECTING TWO HHW
UNITS TOGETHER
4. When both Attachment
Plates are installed and the
units are aligned and level,
tighten all the #8x5/8"
Panhead Screws (H8).
3. Attach two Attachment Plates (H7) to the undersides of
each Top (C) using #8x5/8" Panhead Screws (H8) in the
pre-drilled holes as shown.
Do not fully tighten these
screws yet!