KDDI NS02 User manual

BasicManual
Contents
Noteson
CellPhoneUse
Illustrationsand
Screenshots
inThisManual
GettingReady
Makingand
AnsweringCalls
CharacterInput
PhoneBook
PairFunction
Mail
Camera
EZweb
EZNewsFlash
EZNavi
InCaseof
LossofYourNS02
Troubleshooting
Index

Introduction
Thank you for purchasing the NS02. Before using your NS02, be sure to read the NS02 Basic Manual (this PDF manual) to
ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe
places so you can retrieve them whenever you need them.
Manuals for the NS02
The NS02 comes with the Basic Manual and Instruction Manual.
For learning the basics:
Read the NS02 Basic Manual (this manual).
For learning details on using each function:
Read the supplied NS02 Instruction Manual (Japanese). Be sure to read the Safety Precautions “安全上のご注意” to
ensure proper usage of the NS02.
The keyword searchable au Online Manual is also available on the au homepage:
http://www.au.kddi.com/manual/index.html
To access from EZweb: Rau one Top 
auお客さまサポート (au Customer Support) 
オンラインマニュアル (Online Manual)
Scan this QR code to access the au Online Manual. 󱽄
•

1
Illustrations and Screenshots in This Manual
Illustrations and Screenshots in This Manual
Note on Illustrations
The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key
illustrations are also simplified as shown below.
Key Illustration
①&
②L
③N
④
123
456
789
*0#
⑤cjs
⑥%
⑦R
⑧F
⑨C
Note on Screenshots
The screenshots in this manual are simplified and may look different from the actual cell phone screens.
The display design themes of the NS02 vary by model color. The screenshots for the Black models are used in this
manual.


•
①
②
⑧
③
④
⑦
⑥
⑤
⑨
①
②
⑧
③
④
⑦
⑥
⑤
⑨

2
Notes on Cell Phone Use
Notes on Cell Phone Use
Cell Phone Etiquette
The cell phone always emits weak radio waves when power
is on.
Use the cell phone in an enjoyable and safe manner without
forgetting to be considerate of others around you.
Use of cell phones is not allowed in some places.
Do not use the cell phone while you are driving. Doing
so is both dangerous and prohibited by law.
Using a cell phone in an aircraft is prohibited by law.
Be sure to turn the cell phone off.
Radio waves from cell phones may interfere with
medical electrical equipment.
Some people close to you in crowded places such
as packed trains may be using a cardiac pacemaker.
Turn the cell phone off in such places.
Abide by the rules of hospitals and other medical
institutions where it is forbidden to use or carry cell phones.
Be considerate of where you use the cell phone and
how loudly you talk.
Do not make calls in theaters, museums, libraries, and
other similar places. Turn power off or turn on manner
mode not to disturb others around you by ring tones.
Do not use the cell phone on a street where you might
interrupt the flow of pedestrians.
Move to areas where you will not inconvenience others
on trains or in hotel lobbies.
Refrain from talking in a loud voice.

•
•

•
•

•
•
•
•
Obtain the permission of other people before you take
their photos with the cell phone's camera.
Do not record information with the cell phone's camera
in bookstores and other locations where taking photos
is not permitted.
Do not use the cell phone while driving!
Turn off your cell phone or put it in Drive Mode while
driving.
Do not use the cell phone while driving a car/motorcycle
or riding a bicycle. It may result in a traffic accident. Using
a cell phone while driving is prohibited by law. Using a
cell phone while riding a bicycle may also be punishable
by law.
Prohibited!
Looking at a cell phone display
Talking on a cell phone while holding it
Drive Mode
In Drive Mode, a Japanese message meaning "I'm
driving now, so I can't answer your call." is played
when a call is received, and asks the caller to leave a
message on the easy voice memo.
When the standby screen is displayed, press cc
Tools Manner Mode Drive Mode.
•
•
•
•

3
Notes on Cell Phone Use
Disaster Message Board Service
When a big scale disaster occurs, you can register
your safety information from EZweb. The registered
information can be referred from anywhere in Japan from
EZweb or Internet.
When a big scale disaster occurs, from
an au phone, you can register your
safety information (i.e. your condition
and comments) to the 災害用伝言板
(Disaster Message Board) created on
the EZweb.
After registration of your safety
information, e-mail is sent to your family
or acquaintances you have previously
designated to notify that your safety
information has been uploaded to
the 災害用伝言板 (Disaster Message
Board).
You can inquire for safety information
of a person by entering his/her phone
number from EZweb or Internet.*
* To inquire from other carriers' cell
phone, a PHS or PC, access
"http://dengon.ezweb.ne.jp/".
Access
Rau one Top 
災害用伝言板 (Disaster
Message Board)
http://dengon.ezweb.ne.jp/
•
•
•
The maximum storage period of the registered
information is 72 hours.
The maximum available number of registrations is 10
per phone number. When the number of registrations
exceeds 10, the oldest one is overwritten.
The demonstration of this service can be referred to
anytime by pressing RRau one Top 
auお客さま
サポート
(au Customer Support)  調べる (Search)

災害用伝言板（デモ版） (Disaster Message Board
(Demo Version)).
To view the Disaster Message Board in English, select
English from the top menu of the Disaster Message
Board.
•
•

•
Registering
safety
information
Registering
safety
information
Inquiring
for safety
information
Inquiring
for safety
information

4
Contents
Contents
Introduction
Illustrations and Screenshots in This Manual 1
Notes on Cell Phone Use 2
Cell Phone Etiquette …………………………………… 2
Do not use the cell phone while driving!……………… 2
Disaster Message Board Service …………………… 3
Contents 4
Getting Ready 6
Checking the Contents of the Box …………………… 6
Names of Parts ………………………………………… 7
Charging the Battery Pack …………………………… 8
Learning the Basics …………………………………… 9
Turning On Power ……………………………………… 10
Switching the Display Language to English ………… 10
Initial Setup of E-mail and EZweb …………………… 10
Checking Your Phone Number and E-mail Address… 10
Display Indicators ……………………………………… 11
Using Main Menu ……………………………………… 12
Changing Your E-mail Address ……………………… 13
Security Code and Passwords ………………………… 14
Making and Answering Calls 15
Making a Call …………………………………………… 15
Making an International Call…………………………… 15
Answering a Call ……………………………………… 16
Returning a Call
(Outgoing History/Incoming History) ………………… 17
One-ring Calls…………………………………………… 17
Adjusting the Earpiece Volume during a Call ……… 17
Turning On Manner Mode ……………………………… 17
Changing the Incoming Ring Tone …………………… 18
Adjusting the Incoming Ring Tone Volume…………… 18
Turning On the Easy Voice Memo …………………… 19
Character Input 20
Character Entry Modes ………………………………… 20
Entering Alphanumeric Characters …………………… 20
Entering E-mail Addresses …………………………… 21
Entering Pictograms …………………………………… 22
Phone Book 23
Saving a Phone Book Entry …………………………… 23
Dialing from the Phone Book ………………………… 23
Editing Phone Book Entries …………………………… 23
Saving a Phone Number from the Incoming or
Outgoing History ……………………………………… 24
Pair Function 25
Registering a Pair Partner …………………………… 25
Making a Call to a Pair Partner ……………………… 25
Sending Mail to a Pair Partner ………………………… 25
Mail 26
Using E-mail …………………………………………… 26
Creating and Sending E-mail Messages …………… 26
Reading Received E-mail Messages ………………… 27

5
Contents
Reading an E-mail Message with an Attached Photo
or Movie ………………………………………………… 27
Replying to Received E-mail Messages……………… 27
Rejecting Spam ………………………………………… 28
Using C-mail …………………………………………… 29
Creating and Sending C-mail Messages …………… 29
Reading Received C-mail Messages ………………… 29
Camera 30
Photo Taking Tips ……………………………………… 30
About Photo Modes …………………………………… 30
Taking a Photo ………………………………………… 31
Viewing Photos ………………………………………… 31
EZweb 32
Accessing Sites ………………………………………… 33
Bookmarking Frequently Accessed Pages ………… 34
Viewing Bookmarked Pages…………………………… 34
Checking Charges ……………………………………… 35
Downloading Chaku-Uta®……………………………… 35
EZ News Flash 36
Basic Operations ……………………………………… 36
Setting EZ News Flash ………………………………… 36
EZ Navi 38
Passenger Seat Navi for People in the Passenger
Seat to Check the Route ……………………………… 38
Security Navi to Check Where Your Kids Are ……… 38
EZ Navi Walk for When You Go Out ………………… 39
Evacuate Navi to Guide You Home or to Nearby
Evacuation Areas during Disasters…………………… 40
In Case of Loss of Your NS02 41
Setting Conditions for Activating the Remote
Auto Lock………………………………………………… 41
Remotely Activating the Remote Auto Lock on
Your NS02 ……………………………………………… 41
Activating the Remote Auto Lock by the Security
Lock Service …………………………………………… 42
Troubleshooting 43
Index 45

6
Getting Ready
Getting Ready
Checking the Contents of the Box
The box contains the cell phone and accessories.
Cell phone
• Battery pack
Pantech external terminal
conversion adapter 02
•
•
CD-ROM
Instruction Manual (Japanese)
Warranty (Japanese)
Safety Precautions (Japanese)
Safety Precautions about Adapters (Japanese)
JIBUN BANK Launcher Operation Guide (Japanese)
•
•
•
•
•
•
Desktop holder, AC adapter and microSD memory card are not included. Purchase the desktop holder (sold separately)
and the common AC adapter 01/02 (sold separately) and a commercially available microSD memory card.
•

7
Getting Ready
Names of Parts
From the Front
Built-in antenna
Phone book key
Power/End key
Microphone
Manner key/
Macro mode key
Application key
Earpiece
EZ key
Clear/Memo key
Safety buzzer key
Pocket light key
Mail key
Answer/Pair key
Number keys
Display
Optical sensor
Cursor key
Charging indicator/
Incoming indicator
Center key
Built-in antenna
Phone book key
Power/End key
Microphone
Manner key/
Macro mode key
Application key
Earpiece
EZ key
Clear/Memo key
Safety buzzer key
Pocket light key
Mail key
Answer/Pair key
Number keys
Display
Optical sensor
Cursor key
Charging indicator/
Incoming indicator
Center key
From the Back
au IC-Card*
* Do not remove this
card unnecessarily as
your phone number is
recorded on it.
Battery pack/cover
Speaker
Camera lens
Photo light/Pocket light/
Camera start indicator
Built-in antenna
Strap eyelet
au IC-Card*
* Do not remove this
card unnecessarily as
your phone number is
recorded on it.
Battery pack/cover
Speaker
Camera lens
Photo light/Pocket light/
Camera start indicator
Built-in antenna
Strap eyelet
From the Sides
External
connection
jack
Charging
terminals
External connection
jack cover
microSD memory
card slot
microSD memory
card slot cover
Infrared port
External
connection
jack
Charging
terminals
External connection
jack cover
microSD memory
card slot
microSD memory
card slot cover
Infrared port

8
Getting Ready
Unfold the power plug of the common AC
adapter 01/02 and plug it into a 100 V AC power
outlet.
Close the cell phone with the battery pack
attached and insert it into the desktop holder
as shown in the figure.
Confirm that the charging indicator lights.
Charging: The charging indicator lights.
Charging finished: The charging indicator goes out.
Hold the desktop holder while removing the cell
phone.
You can also charge the battery pack by connecting
the Pantech external terminal conversion adapter 02
and the common AC adapter 01/02 directly to the
external power terminal.
󰾯
󰾯
󰾯
•
•
•
•
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Be sure to charge the battery pack before using the cell
phone for the first time.
The desktop holder and the AC adapter is not included.
Purchase the desktop holder (sold separately) and the
common AC adapter 01/02 (sold separately).
3
2
Charging indicator
4
Common
AC adapter 01/02
Desktop holder
100 V AC
power outlet
Power
plug
1
Power
terminal
Connector
Connect the common AC adapter 01/02 to the
desktop holder.
Check the shape of the connector of the common AC
adapter 01/02 and then plug it straight into the power
terminal of the desktop holder.
•
󰾯
•

9
Getting Ready
Learning the Basics
Key Assignments
If you lose track of where you are or if you make a mistake, press CCto return to the previous screen. Return to the
standby screen by pressing FF.

•
d: Display Alert window/Shortcut
menu.
N: Make/answer calls.
Use the Pair function.
C: Set/cancel Easy voice memo.
Delete characters.
Cancel operation.
l: Display Incoming History. u: Display the ticker field, info pane.
c: Display Main menu.
R: Display EZ Service menu.
#: Turn Pocket light on.
0: Sound Safety buzzer.
F: Turn power on/off.
End call/communication.
Cancel operation.
0〜9*#:
Input phone numbers and
characters.
r: Display Outgoing History.
%: Activate EZapps.
&: Use Phone Book.
*: Set/cancel Manner mode.
L: Send/receive e-mail/c-mail.
d: Display Alert window/Shortcut
menu.
N: Make/answer calls.
Use the Pair function.
C: Set/cancel Easy voice memo.
Delete characters.
Cancel operation.
l: Display Incoming History. u: Display the ticker field, info pane.
c: Display Main menu.
R: Display EZ Service menu.
#: Turn Pocket light on.
0: Sound Safety buzzer.
F: Turn power on/off.
End call/communication.
Cancel operation.
0〜9*#:
Input phone numbers and
characters.
r: Display Outgoing History.
%: Activate EZapps.
&: Use Phone Book.
*: Set/cancel Manner mode.
L: Send/receive e-mail/c-mail.

10
Getting Ready
Hiding/Redisplaying the
Alert Window
When the alert window is displayed on
the standby screen, you can temporarily
hide it by pressing Cand then
display the Main menu by pressing c.
To redisplay the hidden alert window,
press dwhen the standby screen is
displayed.
Turning On Power
Hold down Ffor at least one second.
You cannot receive or make calls if (out of range
indicator) is displayed.
Turning Off Power
When the standby screen is displayed, hold down Ffor
at least two second.
Switching the Display Language
to English
You can switch the display language for function names
and other items to English.
When the standby screen is displayed, press c.
Use ato select
 (Settings) and then
press c( [Select]).

•

󰾯
Alert window
Alert window Use jto select
 (Screen Setup) and
then press c( [Select]).
Use jto select Set Language and then press
c( [Select]).
Use jto select English and then press
c(OK).
Initial Setup of E-mail and EZweb
To use e-mail and EZweb, you need to apply for an EZweb
subscription. If you did not apply for an EZweb subscription
at the time of purchase, contact an au shop or the au
Customer Service Center.
Also, before use, you need to configure initial settings. Your
e-mail address is assigned automatically in the initial setup.
When the standby screen is displayed, press L.
Press c(OK).
After a short while, your e-mail address is displayed.
Press c(OK).
The initial settings are complete.
You can also configure initial settings by pressing RR
or %%.
Checking Your Phone Number
and E-mail Address
When the standby screen is displayed, press c
and then 0.
󰾯
󰾯
󰾯
󰾯
󰾯
•

11
Getting Ready
Display Indicators
Display indicators inform you of mail arrival, current settings, etc.
Display
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
⑫ ⑬ ⑭ ⑮ ⑰⑯ ⑱ ⑲ ⑳

㉑
㉓
㉒
㉔ ㉕
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
⑫ ⑬ ⑭ ⑮ ⑰⑯ ⑱ ⑲ ⑳

㉑
㉓
㉒
㉔ ㉕
Indicator Description
①Signal strength
②Battery level
③
microSD memory card
(commercially available)
inserted
④During a call
Connecting to EZweb
⑤EZapps activated
Connecting over SSL
⑥Missed calls
⑦Receiving EZ News
Flash information
⑧
New or unread e-mail/
c-mail
New or unread
emergency earthquake
bulletin
⑨Displaying secret
informations
Indicator Description
⑩
Movable to next/
previous screen
Scrollable
⑪Current date and time
⑫Easy voice memo set
⑬Manner mode set
⑭Alarm set
⑮Schedule alarm set
⑯Signal off mode set
⑰USB connected
⑱Ring tone off
⑲Vibrator on
⑳Auto lock activated
㉑Ticker field
㉒Wallpaper
㉓Info pane
㉔Alert icon
㉕Shortcut menu
The date and time are set automatically.•

12
Getting Ready
Using Main Menu
You can access various functions from the Main menu.
The Main menu patterns vary by model color. The screenshots
for the Black models are used in this manual.
Model Color Main Menu Pattern
Black Keitai-Arrange File1
Green Keitai-Arrange File2
Ivory Keitai-Arrange File3
You can use the Kantan menu by changing to the Kantan
mode.
When the standby screen is displayed, press c, use ato
select Kantan, and then press c(Select).
Each Main menu pattern has a different set of items.
Normal Menu Kantan Menu
IrDA Call
Photo Camera
micro SD microSD
JIBUN BANK EZ Service
Data Folder Data Folder
Tools Tools
Memo Memo
Alarm Settings
Calendar JIBUN BANK
Calculator
Settings
Kantan

13
Getting Ready
Changing Your E-mail Address
You can change the account
name of your e-mail address.
When the standby screen is displayed, press L.
Use jto select E-Mail Setup and then press
c(Select).
Use jto select Other Setup and then press
c(Select).
The cell phone connects to the server.
Use jto select  (Change
E-mail Address) and then press c(Select).
Use jto select the entry box, press c(Edit),
enter your security code, and then press c(OK).
Your security code is the four-digit number you wrote
on your subscription form.
If the security code is incorrectly entered three times
consecutively during a single day, the e-mail address
change operation will be disabled until the next day.
Use jto select  (Send) and then press
c(Select).
Use jto select
 (Accept) and then
press c(Select).
󰾯
󰾯
󰾯
󰾯
•
•
󰾯
󰾯
△△△@ezweb.ne.jp
Account name Domain name
E-mail address
△△△@ezweb.ne.jp
Account name Domain name
E-mail address
Use jto select the entry box, press c(Edit),
enter an e-mail address using single-byte
alphanumeric characters, and then press
c(OK).
For details on entering e-mail addresses, see page 21.
Use jto select  (Send) and then press
c(Select).
Use jto select OK, press c(Select) and then
c(OK).
Check that the e-mail address has been updated
before pressing c(OK).
Your e-mail address cannot be changed if the new
address you enter in the above procedure is already
being used. In this case, enter a different e-mail
address.
󰾯
•
󰾯
󰾯
•
•

14
Getting Ready
Security Code and Passwords
You can use a security code and other passwords
described below.
Take care not to forget your security code and passwords,
because they are required for performing various
operations and using subscription services.
Security Code
Usage
Example
①Using the Answering Service (Voice
Mail) and Call Transfer remotely from a
fixed-line phone
②Making inquiries, applications, and
changes while using au Customer
Service Center voice guidance, au web
pages, and EZweb
③Changing the settings of Mail Filter or
Other Setup under E-Mail Setup
Initial Setting The four-digit number you wrote on your
subscription form
Lock No.
Usage
Example
Changing various settings of the cell
phone
Initial Setting 1234


EZ Password
Usage
Example
Subscribing or canceling subscriptions to
EZweb fee-based contents
Initial Setting The four-digit number you wrote on your
subscription form
Premium EZ Password
Usage
Example
①Subscribing or canceling subscriptions
to EZweb fee-based contents paid
by
まとめて au 支払い (au Collective
Payment Service)
②Purchasing products from EZweb sites
using
まとめて au 支払い (au Collective
Payment Service)
Initial Setting The four-digit number you wrote on your
subscription form



15
Making and Answering Calls
Making and Answering Calls
Making a Call
When the standby screen is displayed, use 0
to 9to enter a phone number.
When calling to a fixed-line phone, you also need to enter
the area code.
Press N.
To end the call, press F.
After you enter a phone number, you can add 184 or
186 to the phone number as follows:
Press cc(Call).
Use jjto select 184 + Call or 186 + Call and then
press cc(Select).
Press cc(Call).
Press cc(Select).
184 + Call: When you do not want to inform the other
party of your phone number.
186 + Call: When you want to inform the other party of
your phone number.
•
󰾯
•
•
➡
➡
➡
➡
Making an International Call
au International Call Service
Available without any additional application
Example: To call 212-123-△△△△ in the USA
Press 005345.
↑
International access code
Press 1.
↑
Country code (USA)
Press 212.
↑
Area code
Press 123.
↑
Phone number
Press N.
Calling charges for this service are added to monthly
cell phone calling charges and billed together.
Check the country code at the au Customer Service
Center.
For charges, refer to au MOBILE PHONE SERVICE
GUIDE or au Customer Service Center.

󰾯
󰾯
󰾯
󰾯
•
•
•

16
Making and Answering Calls
001 KOKUSAI MOBILE TALK
Application required.
For inquiries, contact the KDDI Customer Service Center.
0077-7160
(toll-free; open 9:00 to 20:00 everyday including
weekends and national holidays)
Charges for 001 KOKUSAI MOBILE TALK are charged
separately from monthly au telephone charges.
Check the country code at the au Customer Service
Center.
For charges, refer to au MOBILE PHONE SERVICE
GUIDE or au Customer Service Center.

•
•
•
001
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
010 212 123
-
XXXX1001
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
010 212 123
-
XXXX1
Answering a Call
To answer a call, press N.
To end the call, press F.
Display When a Call is Received
The phone number of the caller appears.
If the caller's phone number and name are in the phone
book, the name is also displayed.
When the phone number of the caller is not displayed, one
of the following indicators may appear.
Indicator Meaning
ID Unsent The caller did not send a Caller ID.
Payphone The call is from a pay phone.
Not Support The call is from a phone that does not
support Caller ID.
Missed Call Notification
If you did not answer a call, and Missed Call are displayed
to let you know that you missed a call.
To check the caller's phone number, use sto select
Missed Call and then press c(OK). You can then return
the call (see page 17).
•



17
Making and Answering Calls
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press l.
Press rwhile the standby screen is displayed to display
the Outgoing History screen.
Use jto select the phone number you want
to call and then press c(View).
Press sto display the Outgoing History screen.
Press N.
The cell phone can store up to 30 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
One-ring Indicator
indicator on the Incoming History screen indicates you
have received a one-ring call (a call rang for three seconds
or shorter). Be careful when you return a call to an unknown
caller.
•
󰾯
•
󰾯
•


Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
d: Decreases the volume.
Turning On Manner Mode
When the standby screen is displayed, hold down
*for at least one second.
This turns on manner mode, and displays , and on
the standby screen. This also turns on easy voice memo,
which is indicated by on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down *for
at least one second.
Turning off manner mode causes , and to disappear
from the standby screen. Easy voice memo is also turned
off, which is indicated by disappearing from the standby
screen.
Even in manner mode, the cell phone still emits a
shutter sound when you take a photo.
•
•

•

18
Making and Answering Calls
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use ato select Settings and then press
c(Select).
Use jto select Sound/Vib/Lamp and then
press c(Select).
Use jto select Incoming Setup and then press
c(Select).
Use jto select Incoming Call and then press
c(Select).
Use jto select Melody and then press
c(Select).
Use jto select Fixed Data and then press
c(Select).
Use jto select the ringtone you want to play
and then press c(Select).
The incoming ring tone is set.
If you press %(Play), the tone plays.
󰾯
󰾯
󰾯
󰾯
󰾯
󰾯
󰾯
•
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use ato select Settings and then press
c(Select).
Use jto select Sound/Vib/Lamp and then
press c(Select).
Use jto select Incoming Setup and then press
c(Select).
Use jto select Incoming Call and then press
c(Select).
Use jto select Volume and then press
c(Select).
Use jto adjust the volume and then press
c(OK).
Each press of jchanges the volume one step.
Step up The ring tone volume gradually increases.
Step down The ring tone volume gradually decreases.
5
󱽘
1
The ring tone sounds at the set volume.
The ring tone does not sound.
󰾯
󰾯
󰾯
󰾯
󰾯
󰾯
•