KI FourC Task Chair Guide

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Repair & Replacement Instructions
FourC™Seating
Seat Replacement
May 2020
Tools Required
• Flat Head Screwdriver
FourC Seat Removal
1. Locate the two seat slide limiters
underneath the back of the seat
as illustrated. Using a flat head
screwdriver, carefully remove the
limiters from the larger opening of
the seat channels (Figure 1, Details
A & B).
2. After the seat slide limiters have
been removed, pull the seat slider
mechanism lever out and slide the
seat mechanism all the way forward
(Figure 2, Details C & D).
3. Carefully lift the seat assembly
straight up off the seat mechanism
(Figure 3).
Detail A
seat slide
limiter
seat
(underside)
flat head
screwdriver
Figure 1
flat head
screwdriver
seat
channel
opening
seat slide
limiter
Detail B
Detail C
Detail D
seat slide
mechanism
lever
seat
(underside)
seat
(underside)
seat slide
limiter
seat
channel
Figure 2
seat
locator
glide
Figure 3

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
FourC Seat Replacement
1. Set the replacement seat onto the
locator glides on the seat mechanism
such that the locator glides insert
through the larger openings in the
seat channels (Figure 4).
2. Pull the seat slider mechanism lever
out and slide the seat all the back
so the channels capture the locator
glides (Figure 6 & Detail F).
3. Using the same seat slide limiters
that were removed in step 1 of the
“FourC Seat Removal” instructions,
orient the limiter so the lip of the
clips is facing the user side of the
chair, then snap the limiters into the
larger openings of the seat channels
(Figure 6 & Detail G).
new seat
locator
glide
Figure 4
seat
(replacement)
openings
chair
Figure 5
seat
channel
opening
Detail E
new seat
(underside)
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel [phone] • www.ki.com
© 2020 Krueger International, Inc. All Rights Reserved • Code KI-RR-000029/KI/PDF/0520
Figure
6
Detail F
Detail G
seat slide
mechanism
lever
seat
(underside)
seat
(underside)
seat slide
limiter
seat
channel
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
FourC™Seating - Seat Replacement
Repair & Replacement Instructions