Kongskilde 300 DDSS User manual

Kongskilde
300 DDSS
300 DDSS Harrows
Flex Drag & Spiral Rollers
Assembly Instructions
and Operating Guide 760000222 - Revision 2
*Model may not be exactly as shown.
Kongskilde reserves the right to make changes to product designs and
specifications without notice or obligation to rework.
See your local Kongskilde representative for current product specific-
ations and options.

2
Introduction: ........................................................................................................................................3
Harrow Extension Arm Assembly .......................................................................................................4
Harrow Arm Assembly ........................................................................................................................6
Harrow Arm Part Details .....................................................................................................................8
2-Bar Flex Drag-Spike Assembly ......................................................................................................10
2-Bar Flex Drag-Spike Part Details ...................................................................................................12
Roller Assembly .................................................................................................................................14
Roller Part Details ..............................................................................................................................16
Assembly Supplement: 2-Bar Drag ...................................................................................................18
Assembly Supplement: Rollers ..........................................................................................................19
Assembly Completion ........................................................................................................................21
Field Adjustments and Settings ..........................................................................................................22
Maintenance .......................................................................................................................................24
Table of Contents

3
Introduction:
Please take the time to carefully read all the instruction booklets provided with your new
Kongskilde product. Once you are finished reading do not throw these guides out. Keep them for
later review.
The Kongskilde 300 DDSS Harrow has been developed as a leveling attachment for the 8200 Series
field cultivators. When properly adjusted the harrow will help to prepare a level surface for planting
in various field conditions and soil types.
The 300 DDSS is comprised of a 2-Bar Flex Drag-Spike harrow with Double Spiral Bar Rota Har-
row to achieve maximum leveling and a superior seed bed.
This booklet has been developed to assist in assembling and operating the 300 DDSS Harrow. Har-
row mounting patterns for each cultivator size are provided in a separate booklet.
Pre-Assembly Tips
Prior to assembling the harrows, the cultivator should be carefully unfolded and lowered so the tines
are resting on a flat level area.
The 300 DDSS should be assembled in four stages:
1. Position and attach the extension arms to the cultivator.
2. Mount the harrow arms to the extension arms.
3. Position and attach the 2-Bar Flex Drag-Spike sections to the arms.
4. Position and mount the Spiral Bar Rota Harrows to the arms.
Refer to following detailed instructions for each stage.

4
Instructions:
NOTE: Determine whether shallow or steep angle will be used for drag-spikes before positioning
extension arms. Refer to assembly supplement section for details.
-Use harrow layout book to position extension arms and attach extensions to rear of cultivator
frame with u-bolts.
Harrow Extension Arm Assembly
2
1
3

5
Parts list / 8200 Harrow Extension Arm Assembly. Date: March 2013
Fig. Part no. Qty Description
1 760052000 2 Harrow Extension Wdmt
2 600373058 4 U-Bolt 5/8” X 4” X 5 1/2”
3 600366031 8 Stover Locknut Type C - 5/8" UNC

6
Instructions:
-Mount the pre-assembled harrow arms to the extensions using the hardware listed on the next
page.
Harrow Arm Assembly
1
3
2
4

7
Parts list / 8200 Harrow Arm Assembly. Date: July 2013
Fig. Part no. Qty Description
1 760052000 2 Harrow Extension Wdmt
2 760053012 2 300 SS Harrow Arm Assembly
3 600356023 8 Bolt 5/8" x 1-3/4" Gr. 5
4 600366031 8 Stover Locknut Type C - 5/8" UNC

8
Harrow Arm Part Details















9
Parts list / 8200 Harrow Arm Part Details. Date: July 2013
Fig. Part no. Qty Description
1 760052004 1 Harrow Roller Bracket Weldment
2 603150180 6 Wear Bushing
3 603150188 1 Intermediate Arm Weldment
4 603150187 1 Short Arm Weldment
5 600381050 4 Flat Washer 1/2"
6 600381020 2 Flat Washer 5/8"
7 600356030 6 Bolt 1/2" x 4-1/2" Gr. 5
8 600373072 2 Bolt 5/8" x 5" Full Thread
9 600366030 6 Stover Locknut Type C - 1/2" - UNC
10 600365014 2 Standard Nut 5/8" Plated
11 603150017 2 Spring
12 603150018 2 Spring Insert

10
2-Bar Flex Drag-Spike Assembly
1
2
3
4
5
7
6
4
8
9
10
11 12
6
Instructions:
-Position drag-spike assemblies behind machine according to layout manual and attach to arms
with hardware and chains provided. With cultivator tines resting on ground, chains should be
positioned to allow spikes to rest on ground so that when cultivator is raised, spikes will be even
with/just below tines. Hanger chains should be mounted to the side of the arm closest to chain
mounting on drag section.
NOTE: Drag-spike assemblies are designed with offset brackets which can be reversed to allow a
steep or shallow working angle. Please refer to assembly supplement section for details.
Initial Settings
Pull Chain
-Use 7 Links
Front Hanger Chain
-Use 12 Links
Rear Hanger Chain
-Use 10 Links