Lamp AZ-AT230-HL Instruction Manual

1
TOUCHLESS MULTI-PURPOSE LID AZ-AT
Installation instructions
PARTS DESCRIPTION
DIMENSION DRAWING
Thank you for using our product. Before installation, please read this manual
thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
Description Quantity
Flap lid body 1
Sticker (warning) 1
Sticker(Open) 1
Wiringclips 3
Cover cap 4
Screw jig 1
●The lid opens automatically when the sensor detects a presence.
●The sensing distance of the sensor can be adjusted from 0 to 300 mm by
adjusting the knob on the back.
TOOLS NEEDED FOR INSTALLATION
FOR YOUR SAFETY AND CORRECT INSTALLATION
ABOUT THE PRODUCT
Item No A B W H C P D
AZ-AT230-HL 234 160 319 266.5 49 95 184.7
AZ-AT310-HL 310 220 395 340 64 140 244.7
CUTOUT DIMENSIONS
●AC Adaptor (sold separately)
●Screws (not provided)
Choose the suitable length according to the material to be mounted.
Recommended screw : Tapping screw Nominal 3 ・・・・ ・4 pcs
A
10
100
Auto-opening
angle: 80ﾟ
C P
4×
I3.5holes
for fixing screws
when flap at 90°(D)
W
H
B
382.4
+1
0
4×R6 Max.
324
+1
0
140
54
147.5
4×R6
Max.
248.5
+1
0
142
9539
Mounting
screw holes
AZ-AT230-HL
AZ-AT310-HL
153.2
+0.5
0
132.5
+0.5
0
Mounting
screw holes
Cut out: Backside view
Cut out: Backside view
45°
0°
300
Front
Side
200
200
45°
300
25°
15°
Sensing range
Caution:If not followed, injury or damage may result.
This product is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation will result in improper
function and may lead to injury.
To avoid any risk of accidental injury, ensure that the product is securely fastened to a support with adequate strength.
Do not use this product for any purpose that is outside of the specifications of this manual.
Do not use outside or anywhere it will be exposed to water. It may cause failure.
Do not use in places where strong radio waves are generated. It may cause malfunction.
Ambient temperature range is 0 to 40ﾟC
The closing speed of the lid may vary according to ambient temperature. If the product is stored below zero degrees allow it to reach room
temperature before use.
Due to the characteristics of the sensor, the sensing distance varies depending on the object.
Prohibited
Warning
Caution Required
Meaning of symbols

2
❶Insert the plug of the
AC adapter here.
❸Adjust the sensing distance with this knob
Clockwise: Increase up to 300 mm
Anti-clockwise: Decrease to 0 mm (No sensing)
❹Use the wiring clips so that the wire does not interfere
with the contents of the waste container.
Recommended screw: Pan head tapping screw I3
❷Hold your hand
over the sensor.
Cover cap
Installation procedure
Mounting of Main Body
1
2Wiring and Adjustment of Sensing Distance
4Pasting the stickers
3Putting on the Cover Caps
5Troubleshooting
6In case of power outage
The lid can be opened manually just like a normal lid system. The soft close is available.
Trouble Solution
No sensing
※1
Make sure that the plug of the AC adapter is connected correctly.
If there is an object in the sensing range of the sensor, move it.
Adjust the sensing distance with the knob ( 󱳝-❸).
Too sensitive
※1
Adjust the sensing distance with the knob ( 󱳝-❸).
LED lights red Check that no objects in the front or back of the lid are clogged with
dust.
Lid doesn't
close fully
Make sure that there is no dust caught in the lid. If that doesn't
ZRUNWXUQWKHSRZHURႇDQGWKHQRQDJDLQ
Lid doesn't
open fully
Check that the back of the lid is not clogged with dust and that
cables are not entangled.
Waste container
❶Fit the main
body to the hole.
❷Insert the screw jig. ❸Fasten with tapping
screw I3 (not provided).
❹Remove the jig.
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO (UK) LTD
Reading, UK
Phone: [phone] E-mail:[email protected]
SUGATSUNE EUROPE GmbH
Dusseldorf, GERMANY
Phone: [phone] E-mail:[email protected]
SUGATSUNE SHANGHAI Co., LTD
Shanghai, CHINA
Phone: [phone] E-mail:[email protected]
Guangzhou, CHINA
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO INDIA PRIVATE LIMITED
Mumbai, INDIA
Phone: [phone] E-mail:[email protected]
SUGATSUNE AMERICA, INC
California, USA
Phone: [phone] E-mail:[email protected]
Chicago, USA
Phone: [phone] E-mail:[email protected].
SUGATSUNE CANADA, INC.
Phone: [phone] E-mail:[email protected]
2021.10 1447-3
Near the sensor
Conspicuous
place on the
entire front lid or
the main body
with waste
※1 
'XHWRWKHQDWXUHRIWKHVHQVRUOLJKWUHÀHFWLYHREMHFWVEULJKWFRORXUVRUVKLQ\REMHFWV
ZLOOLQFUHDVHWKHVHQVLQJGLVWDQFHZKHUHDVREMHFWVZKLFKDUHQRWUHÀHFWLYHGDUNFRORXUV
or non-shiny objects) will decrease the sensing distance.