Lamp HCZ-80 User manual

1
Thank you for selecting our product. Before starting installation,
please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
Sliding Door Latch, Model HCZ-80
Installation Instruction
●Sliding door latch with thumb turn and indicator.
●Closing mechanism leaves no gap between door and doorjamb.
●Safety mechanism allows the hook to work only when the door is closed.
●Hook is completely retracted when the door is open.
Caution
Make sure to follow the designated measurements, specifications, and horizontal/vertical angles. Make sure that the
frame is not warped, since it may affect the movement of the door.
This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to
ensure that it is well-functioning and safe.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
Prohibited
Warning
Caution Required
Meaning of symbols
If not followed injury or damage may result.
Sliding door latch
Strike box
OPTIONAL PARTS
Item No.: HCZ-80B- ＊＊ ( ＊＊LV¿QLVKFRGH6HHWKHWDEOHEHORZ
Provided tools: Hex key 3 mm. See table below for the provided screws.
Provided screws Q'ty for glass door
t10 - 13 for wood door
t33 - 37 t38 - 42 t43 - 45
Attached to
latch
3 M4×20 M4×45 M4×50 M4×55
1 M3×10
2M3×8
Attached to
strike box
2 M5×20 M5×45 M5×50 M5×55
1 M3×16
2M3×8
Hexagon socket
countersunk
head screw
Strike plate
Item No. ZL-2402-FB
Provided screws: Countersunk
tapping screw
3x20 … 3 pcs
（HCZ-80Gonly） （HCZ-80Wonly）
ABOUT THE PRODUCT
FOR YOUR SAFE WORK AND CORRECT INSTALLATION
PARTS COMPOSITION
③Indicator ①Housing ②Latch body ④Face plate ⑤Inner plate ⑥Inner plate ⑦Gasket
2 pcs
Provided tools: Hex key 2 mm,2.5 mm. See table below for the provided screws.
＊＊LV¿QLVKFRGH6HHWKHWDEOHEHORZ
Item No. : HCZ-80G- ＊＊IRUJODVVGRRUWKLFNQHVVPP
: HCZ-80W- ＊＊IRUZRRGGRRUWKLFNQHVVPP
⑧Strike box ⑨Strike body ⑩Cover ⑪Strike ⑫Gasket
2 pcs
⑬
Strikeplate
CR Chrome plating
SN Dull nickel plating
$ERXW¿QLVKFRGH＊＊

2
Sliding door latch (for glass door)
Indicator side (as locked)
Strike box
80
62
6.5 6.5
18.5 18.5 17.3
Thickness:
10 - 13 mm 64 112
80
I60
64 112
80
Strike plate
Sliding door latch (for wood door)
3xI5、
I7
3.47.4
21.2
Thickness:
33 - 45 mm
12
63
80
32
32
6.5
2
Emergency release
Use coin or similar to unlock the latch.
See installation procedure about the process dimensions.
Installation drawing

3
INSTALLATION PROCEDURE (for glass door)
Strike side Latch body side
■Assembly of strike box ■Installation of latch body
󱫀󱫀
󱫂󱫂
See page 4 about the mounting of strike plate.
(Door thickness: 10 - 13 mm)
Tightening torque
※1：0.5 - 0.7 N・ｍ
※2：0.9 - 1.4 N・ｍ
41
2I12
Process dimensions Process dimensions
I8.5
10.5 74
I40
48
⑧Strike box
⑨Strike body
⑫Gasket ⑩Cover
Hexagon socket countersunk head screw M5x20
For wood door, choose suitable length according
to the table on page 1.
Hex key 3 mm
Hexagon socket
countersunk head screw
M3x16
Hexagon socket
countersunk head screw
M3x8
⑪Strike
Hex key 2 mm
(attached to sliding door latch)
⑦Gasket
Hexagon socket
countersunk head screw
M4x20
Hex key 2.5 mm
②Latch body
①Housing
③Indicator
※¹
※²
Hex key 2 mm
Hexagon socket
countersunk head screw
M3x8
Hexagon socket
countersunk head screw
M3x10
⑤Inner plate
④Face plate
Strike box and latch body alignment: ±3 mm

①Housing
②Latch body
⑦Gasket
③Indicator
Hexagon socket countersunk head screw M4
Choose suitable length according to the table
on page 1.
Hex key 2.5 mm
※²
※¹
4
INSTALLATION PROCEDURE (for wood door)
󱫀
󱫂
■Assembly of strike plate
■Assembly of strike box
Tightening torque
※
1
：0.5 - 0.7 N・ｍ
※
2
：0.9 - 1.4 N・ｍ
'RRUWKLFNQHVVPP
■Installation of latch
Strikeside Latch body side
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO (UK) LTD
Reading, UK
Phone: [phone] E-mail:[email protected]
SUGATSUNE EUROPE GmbH
Dusseldorf, GERMANY
Phone: [phone] E-mail:[email protected]
SUGATSUNE SHANGHAI Co., LTD
Shanghai, CHINA
Phone: [phone] E-mail:[email protected]
Guangzhou, CHINA
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO INDIA PRIVATE LIMITED
Mumbai, INDIA
Phone: [phone] E-mail:[email protected]
SUGATSUNE AMERICA, INC
California, USA
Phone: [phone] E-mail:[email protected]
Chicago, USA
Phone: [phone] E-mail:[email protected].
SUGATSUNE CANADA, INC.
Phone: [phone] E-mail:[email protected]
2018.08 1218-1
Process dimensions
Surface mount Recessed mount
20
Max. R3
Depth
2 mm
5.58
63 31.5
⑬Strike plate
Countersunk
tapping screw 3x20
Common center line
for latch
80
Surface mount Recessed mount
Hex key 2 mm
Hexagon socket
countersunk head screw
M3x8
Hexagon socket
countersunk head screw
M3x10
④Face plate
⑥Inner plate
41
2I12
Process dimensions Process dimensions
I8.5
10.5 74
I40
48
Assembly process is the same as
JODVVGRRU6HHSDJH Strike box and latch body alignment: ±3 mm
󱫀