LaserLiner VideoScope XL User manual

02
DE
06
EN
10
NL
14
DA
18
FR
22
ES
26
IT
30
PL
34
38
42
46
50
FI
RU
UK
CS
ET
LV
LT
RO
BG
EL
SL
HU
SK
PT
SV
NO
TR
VideoScope XL
200
125
147
100
3,5"
3500

Function / Application
This inspection camera features a micro-camera which sends colour video images to the LCD so that areas
which are difcult to access (cavities, shafts, masonry or inside cars, for example) can be checked.
06
EN
Completely read through the operating instructions, the "Warranty and Additional Information"
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
!
General safety instructions
– The device must only be used in accordance with its intended purpose and within the scope of
the specications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modied in any way.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or signicant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– The LCD unit must not be immersed in water. The base unit must not come in contact with liquids.
– The camera head is not acid-resistant or reproof.
– It is absolutely vital to ensure that the VideoScope XL does not come into contact with chemicals,
current, moving or hot objects. This can damage the device and put its user at risk of serious injury.
– The VideoScope XL must not be used for medical examinations / examining people.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
– The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of
applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable conditions, the accessible radiation
of the LEDs is safe for the human eye and skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limit values in
accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people
with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be
subject to hazards or interference.
Safety instructions
Using artificial, optical emission (OStrV)
LED outlet

VideoScope XL
5
2.0x
+
a
b
c
AA
AA
AA
AA
4x AA
1 432
LCD
aBattery status
bZoom level
cIntensity of LED lighting
(5 brightness levels)
1LCD
2ON/OFF
3Hot keys
4Operation indicator
aZoom in
bZoom out
cRotation 180°
dLED lighting +
eLED lighting –
5Battery compartment
6Camera head
7LED
8Lens
07
EN
2
3
1
5
4
78
6
3
a c d
eb
NOTE: The VideoScope XL delivers sharp images in a range between 3 and 7 cm from the camera head.
Objects outside this range may appear blurred.
4ON/OFF
First use

5
2.0x
+
1x = 180°
2x = 180°
0 = 0%
1 = 20%
2 = 40%
3 = 60%
4 = 80%
5 = 100%
1x = 120%
2x = 140%
3x = 160%
4x = 180%
5x = 200%
08
EN
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
3 - 7 cm
< 3 cm > 7 cm
Camera head / Focus
The VideoScope XL delivers sharp images in a range between 3 and 7 cm from the camera head.
Objects far outside this range may appear blurred.
5Functions during transmission of images
Line up the camera head on the ex cable and
move it to the required position. If lighting
conditions are poor, switch on the LED lighting.
Zoom in on distant or small objects. The manual
image rotation function enables the image to
be rotated by 180° on the monitor.

VideoScope XL
09
EN
Technical Data
Technical revisions reserved. 18W13
Camera head ø 9 mm, water-resistant, IP 68
Camera focus F3 cm - F7 cm
Screen type 3,5” TFT colour display
Display resolution 320 x 240 pixels
Camera resolution 640 x 480 pixels
LED 5 brightness levels
Zoom 2x digital zoom in 20% increments
Length of flex cable 3,5 m
Power supply 4 x AA 1.5 V batteries
Operating conditions
0°C … 45°C, Max. humidity 20 … 85% rH,
no condensation, Max. working altitude 4000 m
above sea level
Storage conditions -10°C … 60°C, Max. humidity 80% rH
Weight incl. batteries 745 g
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=vsxl

54

VideoScope XL
55

VideoScope XL
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: [phone], Fax: [phone]
[e-mail]
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: [phone], Fax: -333
www.laserliner.com
Rev18W13