Maschio ENTRY 120 User guide

Cod. F07022163 2018-03
ENTRY
120-150
*)
*) Valido per Paesi UE
*) Valid for EU member countries
*) Valable dans les Pays UE
*) Gilt für EU-Mitgliedsländer
*) Válido para Países UE
MASCHIO Fienagione S.p.A.
EN USE AND MAINTENANCE
Original manual written in ITALIAN

USE AND MAINTENANCE ENGLISH
Cod. F07022163 pag.1
Pre-delivery inspection
The following inspections, adjustments and interventions were performed before machine’s delivery:
□All grease fittings lubricated.
□Gearbox oil level checked and topped up (as necessary).
□Tyre inflation checked and adjusted.
□All screws and nuts tightened.
□Grease removed from the mesh cutter.
□Monitor battery cable properly connected.
□Testing cycle performed.
□Hatch opened and closed freely.
□Pre-cutting device properly operating.
□Monitor properly operating.
□Switches and sensors properly adjusted.
□Absence of leaks from hydraulic hose or respective connections verified.
□Proper chain tension and lubrication verified.
□Paint and stickers smooth and clean.
□Delivery of operator's manual to customer.
□Delivery of other documentation (CE – road approval where required).
□The operator is aware of the safety precautions to be followed with the machine.
□Remove the packaging used for delivery / shipment from the round baler, taking care not to damage the
machine.
Date:
Signature of the dealer or his technician:

ENGLISH USE AND MAINTENANCE
pag.2 Cod. F07022163
CONTENTS
1_INTRODUCTION .................................................................................................................3
2_CERTIFICATIONS...............................................................................................................4
3_TECHNICAL DATA .............................................................................................................6
4_GENERAL SAFETY REGULATIONS ...............................................................................11
5_TRANSPORT AND HANDLING ........................................................................................26
6_GENERAL DESCRIPTION ................................................................................................29
7_INSTRUCTIONS FOR USE ...............................................................................................31
8_OPERATION IN THE FIELD..............................................................................................45
9_MAINTENANCE AND ADJUSTMENT ..............................................................................49
10_CONTROL SYSTEM “FF CONTROL” ............................................................................69
11_TABLES AND DIAGRAMS .............................................................................................71
12_PROBLEMS AND CAUSES ............................................................................................77
13_ACCESSORIES AND KITS (OPTIONAL) .......................................................................80

USE AND MAINTENANCE ENGLISH
Cod. F07022163 pag.3
1_INTRODUCTION
Dear Client,
congratulations on choosing a MASCHIO FIENAGIONE product.
The greatest safety, efficiency and working life will result from the complete observance of the instructions
contained in this "Operator Manual”.
1.1_OPERATOR MANUAL
This manual is an integral part of the machine that you have bought. The suppliers of both new and used
machines are obliged to hand over this manual originally provided with the machine.
If this machine is sold again to a third party the manual must be handed over together with it.
If the operator's manual is damaged or lost, request an identical copy from our Spare Parts Service, specifying
the number of the manual or, if this is not available, the information stamped on the metal data plate affixed to
the machine.
Read the operator's manual carefully in its entirety and if you do not understand some points contact your
MASCHIO FIENAGIONE dealer or our Assistance Centre, the addresses of which are given on the last page
of this manual.
Inform all possible operators of the contents of this manual since the machine is to be used only by trained
expert personnel who are aware of the possible dangers arising from the use and maintenance of the
machine.
The manufacturer therefore declines all and any liability for damage due to negligence or failure to
observe the contents of the present manual.
ALWAYS USE ORIGINAL SPARE PARTS.
Should the need arise for the supply of original spare parts, contact your MASCHIO FIENAGIONE dealer or
our Spare Parts Service.
1.2_GUARANTEE
Reference is made to the general guarantee conditions found enclosed with the purchase contract signed by
you.
1.3_USE
The round baler has been manufactured to collect and press into cylindrical bales: hay, semi-dry forage, grass
and straw. A single operator on the tractor is capable of carrying out all the various operations.
Any other use of the machine that is not covered by this manual releases MASCHIO FIENAGIONE from
all and any liability for damage to persons, animals or things.

ENGLISH
USE AND MAINTENANCE
pag.4 Cod. F07022163
2_CERTIFICATIONS
2.1_“CE” CONFORMITY
The Entry round baler is a machine with "CE" marking in compliance with the
standards of the European Union described in 2006/42/CE Directive and
2014/30/UE Directive (Electromagnetic Compatibility), as shown in the “CE
Declaration of Conformity” provided with every machine.
MASCHIO FIENAGIONE declines all liability arising from use of the machine on products that do not
correspond to European standards.
If the machine should be sold to a third party, the declaration of conformity must be handed over together with
it.
2.2_IDENTIFICATION
The round baler is supplied with:
Operator Manual
CE Declaration of conformity
Instruction handbook for the cardan shaft
Every machine is also provided with an identification plate showing:
Name and address of the manufacturer
“TYPE” = model of the machine
“N°” = serial number
“Weight kg” = weight of the machine
Year of manufacture
"CE" marking
The information shown on the identification plate of the machine must always be quoted in any request for
spare parts and/or assistance.
Copy the machine information into the plate reproduced on the back of the cover for ease of consultation.

USE AND MAINTENANCE ENGLISH
Cod. F07022163 pag.5
Road homologation
If your round baler is approved for road traffic, the machine will be delivered complete with documents
necessary for matriculation.
You will then have to go to the office responsible for carrying out the matriculation.
Follow the instructions on the enclosed documents to register the machine.

ENGLISH USE AND MAINTENANCE
pag.6 Cod. F07022163
3_TECHNICAL DATA
The technical data contained in the following tables are informative therefore we reserve the right to
modify them without obligation to give prior notice.
All the measurements are expressed in millimetres (mm), in feet (ft) and inch (in).
All the weights indicated are in kilograms (kg) and in pound (lb).
The symbol “÷” indicates a value lying between a minimum and a maximum.
3.1_DIMENSIONS
model Entry 120 Entry 150
Lu = Length 3650 mm (11 ft 11,7 in) 3800 mm (12 ft 5,6 in)
LaS = Width with narrow pick-up and tyres
11.5/10-15.3 2265 mm (7 ft 5,2 in)
LaS = Width with narrow pick-up and tyres 400/60-
15.5 2445 mm (8 ft 0,3 in)
LaL = Width with large pick-up 2510 mm (8 ft 2,8 in)
H*= Height (with standard tyres) 2010 2040 mm (6 ft 7,1 in
6 ft 8,3 in)
2310 2340 mm (7ft 6,9 in
7ft 8,1 in)
(*) The variation in height comes from the inverted assembly of semiaxis.
With LARGE pick-up
With NARROW pick-up
Lu
H
LaL LaS

USE AND MAINTENANCE ENGLISH
Cod. F07022163 pag.7
3.2_WEIGHTS
3.2.1_WEIGHTS WITH LARGE PICK-UP
Unladen weight Entry 120 Entry 150
With tyre 11.5/80-15.3 2170 kg (4784 lb) 2500 kg (5512 lb)
With tyre 400/60-15.5 2210 kg (4872 lb) 2540 kg (5600 lb)
Max. weight allowed (*) Entry 120 Entry 150
With tyre 11.5/80-15.3 2310 kg (5093 lb) 2640 kg (5820 lb)
With tyre 400/60-15.5 2310 kg (5093 lb) 2640 kg (5820 lb)
(*) The permissible load is linked to consumables (film rolls, net, etc.) no to the bale.
For more informations, see chapter 4 to the paragraph "Warnings for the machine”.
Max vertical load on towing eye Entry 120 Entry 150
With tyre 11.5/80-15.3 415 kg (914 lb) 480 kg (1058 lb)
With tyre 400/60-15.5 415 kg (914 lb) 480 kg (1058 lb)
Max vertical load on axle Entry 120 Entry 150
With tyre 11.5/80-15.3 1895 kg (4177 lb) 2160 kg (4761 lb)
With tyre 400/60-15.5 1895 kg (4177 lb) 2160 kg (4761 lb)
3.2.2_WEIGHTS WITH NARROW PICK-UP
Unladen weight Entry 120 Entry 150
With tyre 11.5/80-15.3 2110 kg (4652 lb) 2500 kg (5512 lb)
With tyre 400/60-15.5 2150 kg (4740 lb) 2480 kg (5467 lb)
Max. weight allowed (*) Entry 120 Entry 150
With tyre 11.5/80-15.3 2310 kg (5093 lb) 2640 kg (5820 lb)
With tyre 400/60-15.5 2310 kg (5093 lb) 2640 kg (5820 lb)
(*) The permissible load is linked to consumables (film rolls, net, etc.) no to the bale.
For more informations, see chapter 4 to the paragraph "Warnings for the machine”.
Max vertical load on towing eye Entry 120 Entry 150
With tyre 11.5/80-15.3 415 kg (914 lb) 480 kg (1058 lb)
With tyre 400/60-15.5 415 kg (914 lb) 480 kg (1058 lb)
Max vertical load on axle Entry 120 Entry 150
With tyre 11.5/80-15.3 1895 kg (4177 lb) 2160 kg (4761 lb)
With tyre 400/60-15.5 1895 kg (4177 lb) 2160 kg (4761 lb)

ENGLISH USE AND MAINTENANCE
pag.8 Cod. F07022163
3.3_PICK-UP AND TRANSPORT UNIT
PICK-UP
Max. collection width 1725
Width between tines 1593
Pitch between tines 69
Roll-holder diameter 250
N°. bars for roll-holder 4
N°. tines for bar 24
N°. of overall tines 96
Support wheels fixed
Dimensions of wheels/n°. wrappers 16.650/10
Adjustment of working height mechanical 13 positions
TRANSPORT UNIT
N°. of tines 16
Pitch between tines 69
3.4_NET BINDING
N°. of skeins 4
Count of the synthetic/natural twine (m/kg) 500700/200400
Net standard
Net runnage (g/m) 1416
Remote electrical control yes
3.5_TYRES
Series 11.5/80-15.3
Option 400/60-15.5
TYRES FEATURES
tyre 11.5/80-15.3 400/60-15.5
N. of plies 12-14 P.R. 10-14 P.R.
Radius (mm) 410 380
Speed (km/h) 40 40
Wheel capacity (kg) 19302187 22402745
Pressure (bar) 3,5 3,5
Outside diameter (mm) 845 875