MASSEY FERGUSON MF 7345 S User manual

Workshop Service Manual
Combines
MF 7345 S - MF 7347 S
Breganze
AGCO S.p.A. - Via F. Laverda, 15/17 - 36042
BREGANZE (VI) – Italy.
© AGCO 2018
March 2018
LA327325014M_7345S_7347S_EN
EME
English

Find manuals at https://best-manuals.com

TABLE OF CONTENT
Preface 1
General Information - 00 2
Engine - 10 3
Drive transmission - 14 4
Transmission - 21 5
Front drive axle - 25 6
Hydrostatic transmission - 29 7
Brakes - 33 8
Hydraulic system - 35 9
Steering - 41 10
Axles and wheels - 44 11
Cab air conditioning system - 50 12
Electrical system - 55 13
Attachments/Headers - 58 14
Product feeding - 60 15
Threshing - 66 16
Separation - 72 17
Straw chopper - 73 18
Cleaning - 74 19
Tank - 80 20
Conversion 21
.
Find manuals at https://best-manuals.com

1 Preface
1.1 Introductory notes ..................................................... 1-3
1.2 Important warnings .................................................... 1-4
1.3 Identification number ...................................................1-5
Table of contents
Combines 1-1
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

Table of contents
1-2 Combines
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

1.1 Introductory notes
•This manual is divided into sections numbered with two-digit numbers, each section having
independent page numbering. For quick reference, these sections have the same identification number
and description as the relevant Flat Time Rate Manual.
• The subjects covered and the information sought can easily be found using the index on the following
pages.
• The information in this manual was updated on the date shown on the booklet. As AGCO is constantly
improving its product range, some information may not be updated due to modifications made for
technical or commercial reasons as well as for compliance with legal requirements in the various
countries. If there are any inconsistencies, contact our AGCO Sales and Service Networks.
GUID-645192D5-7F9B-4756-9D27-32FAF1460CFA [V1]
1. Preface
Combines 1-3
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

1.2 Important warnings
•Warning: Some of the models listed in this manual are not marketed in your country. For more
details, contact your dealer.
• All repair and maintenance work listed in this manual must be carried out exclusively by the AGCO
Service Network, in strict compliance with the instructions provided and using, where necessary, the
special tools required.
• Anybody who carries out the above operations without scrupulously complying with the instructions
shall be held personally liable for any damage caused as a result of their actions.
• The Manufacturer and all the organizations in its distribution chain, including (without limitation) national,
regional or local dealers, reject any responsibility for damage due to the abnormal behavior of parts
and/or components not approved by the Manufacturer, including those used for the servicing or repair of
the product manufactured or marketed by the Manufacturer. In any case, no warranty of any type is
issued or imposed concerning the product manufactured or marketed by the Manufacturer for damage
due to abnormal behavior of parts and/or components not approved by the Manufacturer.
LITERARY AND ARTISTIC PROPERTY OF AGCO CORPORATION
Reproduction of text and illustrations, even partially, is prohibited
PRINTED IN ITALY
GUID-6A968CF6-57C5-478A-8E25-994687984E8C [V1]
1. Preface
1-4 Combines
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

1.3 Identification number
CAUTION: Some of the models listed in this manual are not marketed in your country
Model Model identification code
MF 7345 S X5AS
MF 7345 S MCS X5BS
MF 7345 S MCS PL X5BS AL
MF 7347 S X6AS
MF 7347 S MCS X6BS
MF 7347 S MCS PL X6BS AL
Description of the combine harvester identification number - Type 1
abc
Example: * 5550 *5550 10001 *
d
a= Technical type
d= Identification number: 555010001 is made up of two parts:
• Part 1 (b), made up of 4 digits "5550", identifies the technical type (machine model).
• Part 2 (c), made up of 5 digits "10001", which increase in numerical order of production and identify the
sequential number of the produced machine model.
*5550*55501.. ...* For MF 7345 S/MF 7345 S MCS models
*5650*56501.. ...* For MF 7347 S/MF 7347 S MCS models
Description of the combine harvester identification number - Type 2
a b c d e f g
Example: *ZN2 0 5550 x 0 3 020001 *
h
h= Identification number: ZN205550x03020001 is made up of 7 parts:
aManufacturer code: ZN2 = AGCO S.P.A.
bNot used.
cTechnical type.
dRandom letter generated automatically.
eNot used.
fProduction site code: 3 = Breganze.
gSequential number.
*ZN205550x03020001* For MF 7345 S/MF 7345 S MCS models
*ZN205554x03000001* For MF 7345 S MCS PL models
*ZN205650x03020001* For MF 7347 S/MF 7347 S MCS models
*ZN205654x03000001* For MF 7347 S MCS PL models
GUID-B3DC5472-53B1-44CC-9B61-502969FCF05A [V4]
1. Preface
Combines 1-5
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

FreeFlow grain header identification number
7116.. ... For the 16 ft (m 4.80) model
7118.. ... For the 18 ft (m 5.40) model
7120.. ... For the 20 ft (m 6.00) model
7123.. ... For the 23 ft (m 7.00) model
7125.. ... For the 25 ft (m 7.60) model
PowerFlow grain header identification number
7018.. ... For the 18 ft model
7020.. ... For the 20 ft model
7022... ... For the 22 ft model
1. Preface
1-6 Combines
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com

2 General Information - 00
2.1 General instructions .................................................... 2-3
2.2 Safety precautions ..................................................... 2-5
2.3 Use of the combine .....................................................2-9
2.4 Technical specifications ................................................ 2-11
2.4.1 Weight .......................................................... 2-11
2.4.2 Dimensions ...................................................... 2-12
2.4.3 General features - X5AS - X6AS models .................................. 2-13
2.4.4 General features - X5BS - X6BS models .................................. 2-20
2.4.5 General features - models X5BS AL - X6BS AL ............................. 2-27
2.5 Lubrication ........................................................... 2-35
2.6 Service intervals ...................................................... 2-36
2.7 Combine dimensions .................................................. 2-39
2.7.1 Clearance between unloading auger and table ............................. 2-45
2.8 Ballast weights ........................................................2-47
2.9 Half-tracks with runners ............................................... 2-48
2.10 Front tire equipment ...................................................2-49
2.11 Rear tire equipment ................................................... 2-53
2.12 Rotation speed and drives when loaded – left-hand side ................. 2-54
2.13 Belt and chain tension references - left-hand side ........................ 2-56
2.14 Rotation speed and drives when loaded – right-hand side ................ 2-64
2.15 Belt and chain tension references - right-hand side .......................2-66
2.16 Location of electrical/electronic/hydraulic components .................. 2-71
2.16.1 Electrical/electronic components - A .....................................2-71
2.16.2 Electrical/electronic components - B .....................................2-82
2.16.3 Electrical/electronic components - D .................................... 2-95
2.16.4 Electrical/electronic components - E ..................................... 2-96
2.16.5 Electrical/electronic components - F .................................... 2-108
2.16.5.1 Description ............................................ 2-109
2.16.5.2 Additional fuses ......................................... 2-111
2.16.6 Electrical/electronic components -G .................................... 2-114
2.16.7 Electrical/electronic components - H .................................... 2-115
2.16.8 Electrical/electronic components - IJ .................................... 2-116
2.16.9 Electrical/electronic components - K .................................... 2-118
2.16.10 Electrical/electronic components - M ................................... 2-125
2.16.11 Electrical/electronic components - R .................................... 2-130
2.16.12 Electrical/electronic components - S .................................... 2-134
2.16.13 Electrical/electronic components - U .................................... 2-143
2.16.14 Electrical/electronic components - X (from 1 to 300) ........................ 2-144
2.16.15 Electrical/electronic components - X (from 301 to 600) .......................2-179
2.16.16 Electrical/electronic components- X (from 601 to 900) ....................... 2-213
2.16.17 Electrical/electronic components - Y .................................... 2-229
2.16.18 Hydraulic components - AC .......................................... 2-236
2.16.19 Hydraulic components - CI ........................................... 2-237
2.16.20 Hydraulic components - FL .......................................... 2-244
2.16.21 Hydraulic components - HV .......................................... 2-245
2.16.22 Hydraulic components - L ........................................... 2-248
2.16.23 Hydraulic components - MR .......................................... 2-252
2.16.24 Hydraulic components - OB .......................................... 2-253
Table of contents
Combines 2-1
LA327325014M_7345S_7347S_EN
Find manuals at https://best-manuals.com