NEC Univerge SV8100 User manual

How to Reboot or Power Down an NEC SV8100 System
Please follow the guide below for instructions on how to reboot or power down an NEC SV8100
System.
Power Button
he power switch is located on the front of the SV8100 chassis to the left hand side.
he SV8100 can support up to a total of 4 Chassis. If you have more than one chassis then they
must be turned off and on again in a certain order. Please see image below of what the system
will look like it if it is a standalone system or if there are multiple chassis.
Power switches are located in the same location for all Chassis’.
Reboot/Power Down for Single C assis System
In the event of a reboot or complete power down, if you only have a single chassis, please
follow the instructions below.
1. Press the power switch to the off position
2. he system will power down, leave the system powered off if required (Due to electrical
work being carried out)
3. Alternatively, count to 10 and then press the power switch back to the on position
4. he system should be up and operational within 5 minutes.
Reboot/Power Down for 2 C assis System
In the event of a reboot or complete power down, if you have 2 chassis’, please follow the
instructions below.
Power
switc
Single Chassis System
wo Chassis System
Four Chassis System

1. On the top chassis, press the power switch to the off position
2. On the bottom chassis, press the power switch to the off position
3. he system will power down, leave the system powered off if required (Due to electrical
work being carried out)
4. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
5. Press the power switch to the on position on the bottom chassis
6. he system should be up and operational within 5 minutes.
Reboot/Power Down for 3 C assis System
In the event of a reboot or complete power down, if you have 3 chassis’, please follow the
instructions below.
1. On the top chassis, press the power switch to the off position
2. On the middle chassis, press the power switch to the off position
3. On the bottom chassis, press the power switch to the off position
4. he system will power down, leave the system powered off if required (Due to electrical
work being carried out)
5. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
6. Press the power switch to the on position on the middle chassis
7. Press the power switch to the on position on the bottom chassis
8. he system should be up and operational within 5 minutes.
Reboot/Power Down for 3 C assis System
In the event of a reboot or complete power down, if you have 4 chassis’, please follow the
instructions below.
1. On the top chassis, press the power switch to the off position
2. On the middle chassis, press the power switch to the off position
3. On the next chassis, press the power switch to the off position
4. On the bottom chassis, press the power switch to the off position
5. he system will power down, leave the system powered off if required (Due to electrical
work being carried out)
6. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
7. Press the power switch to the on position on the middle chassis
8. On the next chassis, press the power switch to the off position
9. Press the power switch to the on position on the bottom chassis

10. he system should be up and operational within 5 minutes.