Omron C200H-TV Series User manual

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
Excellent Integrated System Limited
Excellent Integrated System Limited
Stocking Distributor
Stocking Distributor
Click to view price, real time Inventory, Delivery & Lifecycle Information:
Click to view price, real time Inventory, Delivery & Lifecycle Information:
Omron Automation & Safety
Omron Automation & Safety
C200H-DSC01
C200H-DSC01
For any questions, you can email us directly:
For any questions, you can email us directly:
[email protected]
[email protected]
1 / 71
1 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
C200H-TV
Heat/Cool
Temperature Control Unit
Operation Manual
Cat. No. W240-E3-1
2 / 71
2 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
v
Notice:
OMRON products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Always heed
the information provided with them. Failure to head precautions can result in injury to people or dam-
age to the product.
DANGER! Indicates information that, if not heeded, is likely to result in loss of life or serious
injury.
WARNING Indicates information that, if not heeded, could possibly result in loss of life or
serious injury.
Caution Indicates information that, if not heeded, could result in relative serious or minor
injury, damage to the product, or faulty operation.
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers
to an OMRON product, regardless of whether or not it appears in the proper name of the product.
The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means
“word” and is abbreviated “Wd” in documentation in this sense.
The abbreviation “PC” means Programmable Controller and is not used as an abbreviation for any-
thing else.
Visual Aids
The following headings appear in the left column of the manual to help you locate different types of
information.
Note Indicates information of particular interest for efficient and convenient operation
of the product.
1, 2, 3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.
OMRON, 1998
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permis-
sion of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is
constantly striving to improve its high-quality products, the information contained in this manual is subject to change
without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-
tion contained in this publication.
3 / 71
3 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
TABLE OF CONTENTS
vii
SECTION 1
System Configuration and Features 1. . . . . . . . . . . . . . . . .
1-1 Features 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 Basic System Configuration 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2
Connections and Settings 5. . . . . . . . . . . . . . . . . . . . . . . . . .
2-1 Nomenclature 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2 Switch Settings 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3 Wiring 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-1 Input Wiring 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-2 Output Wiring 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-3 Data Setting Console Cables 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3
Data Setting Console Operation 19. . . . . . . . . . . . . . . . . . . .
3-1 Operating Procedure 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2 Data Flow 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3 Nomenclature and Features 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3-1 Nomenclature 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3-2 Features 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4 Parameter Displays and Settings 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4-1 Table of Parameters 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4-2 How to Display and Set Parameter Data 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4
PC Memory Allocation and Programming 35. . . . . . . . . . .
4-1 Memory Allocation 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-1 Memory Allocation Table 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-2 Memory Contents 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-3 Table of Commands 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2 Data Flow 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3 Programming 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3-1 Example with SW2-1 in the Fixed Position 43. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3-2 Example 1: Write with SW2-1 in the Normal Position 44. . . . . . . . . . . . . . . . . . . .
4-3-3 Example 2: Read with SW2-1 in the Normal Position 47. . . . . . . . . . . . . . . . . . . .
4-3-4 Operation Timing 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 5
Troubleshooting 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Detection 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Specifications 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B Sensor Temperature Measurement Ranges 59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C Heater Burnout Detection 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D Parameters and Key Operations 67. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index 69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision History 71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 / 71
4 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
ix
About this Manual:
This manual describes the installation and operation of the C200H-TV Heat/Cool Temperature
Control Unit and includes the sections described below. Also briefly described is the basic operation and
installation of the C200H-DSC01 Data Setting Console.
Please read this manual carefully and be sure you understand the information provided before attempting
to install and operate the Heat/Cool Temperature Control Unit and Data Setting Console.
Section 1 provides Heat/Cool Temperature Control Unit features and describes its basic system configu-
ration.
Section 2 provides information on the connections and settings of the Heat/Cool Temperature Control
Unit.
Section 3 provides the basic operating procedures of the Data Setting Console including parameter set-
tings and displays.
Section 4 provides the C200H PC’s memory allocation for the Heat/Cool Temperature Control Unit. Basic
programming procedures and examples are also provided.
Section 5 provides possible errors and error remedies.
The five Appendices provide references dealing with specifications, sensor temperature measurement
ranges, heater burnout detection, and dimensions, and a table of Data Setting Console key operations.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
5 / 71
5 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
1
SECTION 1
System Configuration and Features
This section provides Heat/Cool Temperature Control Unit features and describes its basic system configuration.
1-1 Features 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 Basic System Configuration 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 / 71
6 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
2
1-1 Features The Heat/Cool Temperature Control Unit measures the temperature of an object
with a connected temperature sensor (thermocouple or platinum resistance
thermometer) and controls the temperature according to preset parameters.
Advanced PID Control
Stable temperature control is achieved using advanced PID control and an auto-
tuning feature.
ON/OFF control can also be selected.
Units Available According to Type of Temperature Sensor
Two types of Temperature Control Unit are available, according to the tempera-
ture sensor used. The C200H-TV00uses a thermocouple, and the
C200H-TV10uses a platinum resistance thermometer.
Two Heat/Cool Control Loops with a Single Unit
Two heating and cooling control loops are possible with one Unit.
Comprehensive Output Specifications
Three types of output specification versions are available: C200H-TV1 for
transistor output, C200H-TV2 for voltage output, and C200H-TV3 for
current output.
Heater Burnout Detection
A Current Transformer (with a detection current range of 0.1 to 49.9 A and a mini-
mum detection current difference of 2.5 A) can be connected to each of the two
control loops to facilitate rapid heater burnout detection and prompt correction of
problems.
Eight Banks of Data Settings
Eight data values such as set point (SP) and alarm set values can be preset in
eight data banks for easy selection.
Data Input and Display
The C200H-DSC01 Data Setting Console (sold separately) is used to input data
and to display process values (PV) and set values (SV).
The easy-to-read display can be panel-mounted.
User Programs Allow Reading and Writing of Data
Data can be set and retrieved by means of C200H user programs.
Features Section 1-1
7 / 71
7 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
3
1-2 Basic System Configuration
C200H PC
Connecting cables:
C200H-CN225 (2 m)
C200H-CN425 (4 m)
24 VDC
Data Setting Console
C200H-DSC01
Loop 1 Loop 2
Temperature
sensor Temperature
sensor
Heater Heater
Current
Transformer
(CT)
Relay box
Remote I/O Terminal or
Connector Terminal
Block Converter Unit
(Refer to page 16)
Solenoid switch
Recommended cable:
ES1000-CA021-051 (0.5 m)
ES1000-CA021-102 (1 m)
ES1000-CA021-202 (2 m)
Current Transformer
(CT)
Coolant
Coolant
Heat/Cool Temperature Control Unit:
C200H-TV00(for thermocouples)
C200H-TV10(for platinum resistance thermometers)
Valve
Extruder
Valve
Heat/Cool Temperature Control Unit Models
Sensor Output type
Transistor
output Voltage output Current output
Thermocouple C200H-TV001 C200H-TV002 C200H-TV003
Platinum resistance
thermometer C200H-TV101 C200H-TV102 C200H-TV103
Basic System Configuration Section 1-2
8 / 71
8 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
4
Number of Units The Heat/Cool Temperature Control Unit belongs to the C200H Special I/O Unit
group. A maximum of ten Special I/O Units (including PC Link Units) can be
mounted on each of the following Racks: CPU Rack, Expansion I/O Rack, and
Slave Rack.
Note Configure the Units such that the maximum current supplied for each Rack is
greater than or equal to the total current consumption for the Units.
Refer to the
C200H PC Operation Manuals .
The number of Special I/O Units used with a Slave Rack is limited by data trans-
mission considerations, as shown in the table below. The numbers in the table
indicate the maximum number of Units of groups A, B, C, or D which can be used
with a single Slave Rack.
A B C D
High-speed Counter Units
Position Control Units
(NC111/112)
ASCII Units
ID Sensor Units
Fuzzy Logic Units
High-density and Mixed I/O
Units
Temperature Control Units
Heat/Cool Temperature
Control Units
PID Control Units
Cam Positioner Units
Temperature Sensor Units
Voice Units Position Control Units
(NC211)
4 units max. 8 units max. 6 units max. 2 units max.
Note 1. When a combination of Units from groups A, B, C, and D is used, the number
from each group must satisfy both the following equations:
3A + B + 2C + 6D ≤12
A + B + C + D ≤8
2. Other Units can be added until the total number of Units reaches ten. If PC
Link Units are used, the number of Units including the PC Link Units must
not exceed ten.
Precautions The IR area of the C200H Special I/O Unit is allocated according to the setting of
the unit number switch on the front panel,
not the address of the slot where the
unit is mounted. Refer to
4-1 Memory Allocation for the allocation of the memory
area.
Leave the two slots next to the CPU free. It is not possible to use devices con-
nected to the CPU (such as the Programming Console) if these slots are occu-
pied.
If the C200H Slave Rack is connected to another SYSMAC model Remote I/O
Master Unit, such as the C120, C500, C1000H, or C2000H, it is not possible to
use a Special I/O Unit with the C200H Slave Rack.
WARNING Always turn the C200H power off before connecting or disconnecting a Unit,
terminal block, or output connector.
Caution Connect thermocouples with the appropriate compensating conductor.
Wire I/O leads in separate ducts from power leads to prevent noise problems.
Number of Units Mountable
on Slave Rack
Basic System Configuration Section 1-2
9 / 71
9 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
5
SECTION 2
Connections and Settings
This section provides information on the connections and settings of the Heat/Cool Temperature Control Unit.
2-1 Nomenclature 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2 Switch Settings 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3 Wiring 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-1 Input Wiring 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-2 Output Wiring 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3-3 Data Setting Console Cables 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 / 71
10 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
6
2-1 Nomenclature
C200H-TV00(For Thermocouple)
Front Panel
Model label
Cover
RUN indicator
SW2
(switching memory contents
and setting direction under
the cover)
SW1
(Unit number setting)
Data Setting Console
connector
Output connector
Sensor input terminal block
Cold junction compensator
Rear Panel
SW202
(input type setting)
SW203
(operation and function settings)
Rack connector
C200H-TV10(For Platinum Resistance Thermometer)
Front Panel Rear Panel
Model label
Cover
RUN indicator
SW2
(switching memory contents
and setting direction under
the cover)
SW1
(Unit number setting)
Data Setting Console
connector
Output connector
Sensor input terminal block
SW202
(input type setting)
SW203
(operation and function settings)
Rack connector
Nomenclature Section 2-1
11 / 71
11 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
7
Indicators
RUN Lit when the Heat/Cool Temperature Control Unit is operating normally.
Unlit when an alarm occurs, and Unit operation stops.
2-2 Switch Settings
The function and setting of switches are identical for all models, except SW202.
Unit Number
SW1 Unit number setting
4
2
6
8
0(1)
(9)
(3)
(5)
(7) The cut-out indicates the selected position. Negative numbers
are not indicated. Turn the switch with a flat-blade screwdriver.
Turn the switch until it clicks in position. Do not leave the switch
between two settings.
The addresses are allocated as shown in the following table according to the
Unit number setting.
Unit no.
setting Allocated address
0 Wd 100 to 109
1 Wd 110 to 119
2 Wd 120 to 129
3 Wd 130 to 139
4 Wd 140 to 149
5 Wd 150 to 159
6 Wd 160 to 169
7 Wd 170 to 179
8 Wd 180 to 189
9 Wd 190 to 199
The switch is factory-set to 0.
Note If the Unit number is set to an existing Unit number, an alarm occurs and the
C200H does not operate.
Turn the C200H power off before setting the Unit number. If the setting is
changed with the power on, the new setting is not valid until the power is turned
off and back on again.
Switching Memory Contents and Setting Direction
SW2 Switching memory contents and setting direction
Remove the cover and set the switch with the tip of a ballpoint pen or a similar
object.
ON
1 2
OFF
O F F
Switch Settings Section 2-2
12 / 71
12 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
8
Switch no. Pin 1 Pin 2
Function Switching memory contents Setting direction
ON Normal C200H PC
OFF Fixed Data Setting Console
The new setting is valid immediately after the switch setting is changed.
Removing and Attaching the Cover
Removing the Cover Attaching the Cover
Insert a small flat-blade screw-
driver between the case and
the cover at the top of the Unit
and lever off the cover.
Place the right edge of the
cover against the case and
press into position.
Switching Memory Contents The methods for designating parameters differ as shown below.
Normal Parameters can be designated as required using
commands. (Refer to
4-1 Memory Allocation ).
Fixed Parameters are allocated in advance.
Refer to 4-1 Memory Allocation for details of the memory contents.
Setting Direction Selector Selects whether the data settings are made from the Data Setting Console or
from the C200H PC, using a user program or Programming Console.
Executed Bank Number
The setting of the executed bank number is made from the C200H PC, regard-
less of the ON/OFF setting of this switch.
Input Type
SW202 Input type setting
C200H-TV00
89012
43
5
6
7
Setting 0123456789
Sensor type R S K J T E B N L U
The switch is factory-set to 2.
The selected position is shown by the arrow. Turn the switch with a small flat-
blade screwdriver.
Selected position
Switch Settings Section 2-2
13 / 71
13 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
9
C200H-TV10
ON
OFF
Setting Input type
OFF JPt 100
ON Pt 100
The switch is factory-set to OFF.
See
Appendix B Sensor Temperature Measurement Range for the measurable
temperature range.
Operation and Function Setting
SW203 Operation and Function Setting
134562
OFF ON
NO
Pin no. Function OFF ON
6Loop 1
Cooling control output Pulses Current output
5 SP write mode Write to EEPROM
and RAM Write to RAM only
4Loop 2 Enabled Disabled or not used
3Display unit °C°F
2 Not used. --- ---
1Control method PID control ON/OFF control
The switch is factory-set to OFF.
This setting is valid when the heating output type is “current,” and input loop 2 is
not used (i.e., when pin no. 4 of switch 203 is ON).
This setting selects the SP storage memory. Set it to ON if the writing is to be
frequently changed.
Loop 2 Set to “enabled” to use input loop 2, or to “disabled” to use only input loop 1. It is
not possible to use only input loop 2.
Note Always set this switch to the ON (disabled) position when input loop 2 is not
used. A sensor error occurs if this switch is set to the OFF (enabled) position
when no temperature sensor is connected to loop 2.
Display Unit Selects whether displays and set values are shown on the Data Setting Console
in Celsius or in Fahrenheit.
Control Method Selects the method of control.
Loop 1 Cooling Control
Output
SP Write Mode
Switch Settings Section 2-2
14 / 71
14 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
10
2-3 Wiring
2-3-1 Input Wiring
C200H-TV00Thermocouple
CT
TC
CT
TC
24 VDC
0.2 A
CT: Current Transformer
TC:Thermocouple
Loop 2
Loop 1
The 24-VDC output from the
C200H CPU or the Power
Supply Units is convenient.
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
Refer to the
table below.
Terminal no. Terminal name
A0 CT Loop 1
A1 CT
A2 TC (–)
A3 TC (+)
A4 CT Loop 2
A5 CT
A6 TC (–)
A7 TC (+)
A8 24 VDC
A9 GND
Wiring Section 2-3
15 / 71
15 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
11
C200H-TV10Platinum Resistance Thermometer
CT
Pt
CT
24 VDC
0.2 A
Pt
Loop 2
Loop 1
CT: Current Transformer
Pt: Platinum resistance thermometer
Heater wire
The 24-VDC output from the
C200H CPU or the Power
Supply Units is convenient.
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
Refer to the
table below.
Terminal no. Terminal name
A0 CT Loop 1
A1 CT/Pt (B)
A2 Pt (B)
A3 Pt (A)
A4 CT Loop 2
A5 CT/Pt (B)
A6 Pt (B)
A7 Pt (A)
A8 24 VDC
A9 GND
Screw down Pt(B) and CT together at terminals A1 and A5.
Input Wiring Precautions
1, 2, 3... 1. Set the type of temperature sensor to thermocouple or platinum resistance
thermometer with SW202 on the rear of the Unit.
The Unit will not operate correctly if the switch setting does not match the
type of temperature sensor connected.
Do not connect different types of temperature sensors to Loop 1 and Loop 2.
2. If no input lead is connected to Loop 2, turn SW203-4 on the rear of the Unit
ON to disable Loop 2. A sensor error occurs if this switch is set to the OFF
(enabled) position when no temperature sensor is connected to Loop 2.
3. Be sure to connect (+) and (–), and (A) and (B) correctly.
4. Wire I/O leads in separate ducts from power leads to prevent noise prob-
lems.
5. A voltage of 24 VDC is used for the voltage output, current output and Data
Setting Console power supply.
6. The terminal block is removable. Make sure that it is attached correctly after
the input wiring connections are completed.
Wiring Section 2-3
16 / 71
16 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
12
Crimp terminals are recommended for the wiring. Take care not to overtighten
the terminal screws. Tightening torque must not exceed 78 N cm (8 kg cm).
Crimp Terminals
The screws on the terminal block are M3.5 self-rising terminal screws. Use the
following types of M3.5 crimp terminals.
7 mm max.
7 mm max.
Soldered Lead
Strip insulation from 7 to 10 mm at the end of the wire and carefully solder the
lead.
7 to 10 mm
ÉÉÉ
ÉÉÉ
10
Compensating Conductors Connect a thermocouple with the appropriate compensating conductor from the
table below.
Type of thermocouple Compensating conductor Classification by
li ti d
Constituent materials
Symbol Previous
symbol
(reference)
Symbol Previous
symbol
(reference)
y
application and
tolerance + conductor – conductor
B --- BX-G --- General-purpose,
tddl
Copper Copper
R --- RX-G, SX-G --- standard class Alloy with copper
ikl j
S --- RX-H, SX-H --- Heat-resistant,
standard class
y
or nickel as major
constituent
K CA KX-G WCA-G General-purpose,
tddl
Alloy with nickel
h
Alloy with nickel as
j tit t
KX-GS WCA-GS standard class
y
or chrome as
ma
j
or
y
major constituent
KX-H WCA-H Heat-resistant,
standard class
major
constituent
KX-HS WCA-HS Heat-resistant,
precision class
WX-G WCA-G General-purpose,
standard class Iron Alloy with copper
or nickel as major
tit t
WX-H WCA-H Heat-resistant,
standard class
j
constituent
VX-G WCA-G General-purpose,
standard class Copper
E CRC EX-G WCRC-G General-purpose,
standard class Alloy with nickel
or chrome as
j
EX-H WCRC-H Heat-resistant,
standard class major
constituent
J IC JX-G WIC-G General-purpose,
standard class Iron
JX-H WIC-H Heat-resistant,
standard class
Terminal Block
Connections
Wiring Section 2-3
17 / 71
17 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
13
Type of thermocouple Constituent materialsClassification by
application and
tolerance
Compensating conductor
Symbol – conductor+ conductor
Classification by
application and
tolerance
Previous
symbol
(reference)
SymbolPrevious
symbol
(reference)
T CC TX-G WCC-G General-purpose,
standard class Copper Alloy with copper
or nickel as major
tit t
TX-GS --- General-purpose,
precision class
j
constituent
TX-H WCC-H Heat-resistant,
standard class
TX-HS --- Heat-resistant,
precision class
Connect a platinum resistance thermometer with copper wire. All three leads
should have the same thickness and the same length to give them identical re-
sistances. Do not branch the two (B) leads near the terminal block as this in-
creases measurement errors.
Current Transformer Use an E54-CT1 or E54-CT3 Current Transformer (CT). Refer to
Appendix C
Heater Burnout Detection
for details of the Current Transformer specifications
and installation dimensions.
2-3-2 Output Wiring
Connection Diagrams
C200H-TV01 Transistor Output
24 VDC 24 VDC
HEAT1
HEAT2
COOL1
COOL2
COM
NC: Not connected
The pairs of terminals B2 to A2 and B1 to A1 are shorted internally. Always sup-
ply power to the 24-VDC terminal (B1) as this drives the internal circuits.
Wiring Platinum Resistance
Thermometers
Wiring Section 2-3
18 / 71
18 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
14
C200H-TV02/TV03 Voltage/Current Output
24 VDC 24 VDC
+
(–)
(–)
Circuit Diagrams
C200H-TV01 Transistor Output
24 VDC
COM
Internal circuits
OUT
C200H-TV02 Voltage Output
OUT (+)
OUT (–)
Internal circuits
C200H-TV03 Current Output
OUT (+)
OUT (–)
Internal circuits
Applicable Connectors The following connector set manufactured by Fujitsu is included with the Unit:
FCN-361J032-AU (soldering connector)
FCN-360C032-B (cover)
Wiring Section 2-3
19 / 71
19 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
15
After soldering the lead to each pin, insulate with heat-shrink tube to prevent
shorting with the adjacent terminal.
Tighten the screws after inserting the connector into the Unit. Push the connec-
tor firmly into the Remote I/O Terminal or Connector Terminal Block Converter
Unit until it fully locks.
Output Cable The output cables in the table below are recommended.
Model Cable length (L)
ES1000-CA021-051 0.5 m
ES1000-CA021-102 1 m
ES1000-CA021-202 2 m
63
L
46
32-pin connector
(manufactured by Fujitsu)
FCN-361J032-AU
20-pin connector
(manufactured by OMRON)
XG4M-2030
28
30
16.1
19
17
15
13
11
9
7
5
3
1
20
18
16
12
10
8
6
4
2
14
XW2B-20G
Pin no. Terminal no.
1
2
3
4
5
6
7
8
9
10
20
18
16
14
12
10
8
6
4
2
11
12
13
14
15
16
17
18
19
20
19
17
15
13
11
9
7
5
3
1
Pin no. Terminal no.
32-pin connector
Pin no. Wire no. Pin no. Wire no.
B16
B15
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
#11
#12
#13
#14
#15
#16
#17
#18
#19
#20
Note Pins A11 through A16 and B11
through B16 are not connected.
20-pin connector
Note The pin numbers of the 20-pin con-
nector are marked for convenience.
Refer to them from the ∆mark.
Pin no. Wire no. Pin no. Wire no.
1
2
3
4
5
6
7
8
9
10
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
#15
#16
#17
#18
#19
#20
11
12
13
14
15
16
17
18
19
20
Wiring Diagrams
Connector Wiring
Precautions
Connection Precautions
Wiring Section 2-3
20 / 71
20 / 71