Opus OFFICERINO User manual

User’s guide OFFICERINO User’s guide OFFICERINO
User’s guide
OFFICERINO
Safety precautions
•Before operating the machine please read the user’s guide carefully.
Operate machine according to the user’s guide. Pay special attention to
the max punching and binding capacity.
•The machine should be kept out of children’s reach.
•Do not use the machine to punch hard materials, such as metal →it may
cause the damage.
•Pay special attention while stretching the plastic comb. Do not reach or put
fingers into the open comb →danger of injury!
•The machine should be protected against dust and moisture. Do not allow
any liquid to get inside the unit.
Recommendation
•Use only recommended supplies or acessories from OPUS company
•The machine is designed to bind documents with the plastic combs only
•Unpack and install all the elements of the device and put it on a sturdy and
level surface
•Before punching important documents, test the settings of the machine on
a sheet of paper.
•The machine punches 15 sheets of paper. The plastic cover should be
punched separately! Do not exceed max punching capacity!.
•In OPUS Officerino blades were oiled to protect them from the corrosion
and to ensure comfortable operation. Before operating machine for the first
time punch some piece of paper few times to clean up the blades.
Choosing the comb size
Choose proper comb size using the table below. Adjust comb size to the
quantity of binding paper sheets, e.g. use 16mm comb to bind 145 sheets of
paper.
Max binding sheets 10 25 45 65 105 125 145 165
Comb size 4,5 6 8 10 12 14 16 18
Max binding sheets 180 210 240 270 300 350 440
Comb size 20 22 25 28 32 38 45

User’s guide OFFICERINO User’s guide OFFICERINO
Punching
•Adjusting paper format slider
Move the slider to the proper position according to the paper format of your
document. Note that the sheet edges should not be punched
NOTE! Make the testing punch on unnecessary sweet of paper to
check its position
•Releasing selectable knives
The machine is equipped with 24 selectable knives, which can be released
separately to prevent punching edges in non-standard paper formats. Pull
suitable breaker switch to release knife (switch pulled out – the knife is turn
off, switch pulled in – the knife is turn on).
•Adjusting paper margin
Turn the knob placed on the right side of the item to choose proper paper
margin (3, 5, 7, 9mm). Opening document after binding is easier when
paper margin is correctly adjusted
Comb size 4,5 - 8 10 - 12 14 - 18 20 - 51
Margin depth 2 3 4 5
•Insterting the documents
Put the pages in order and even the edges. Insert the document into the
paper slot (max 15 sheets of 80 g/m² paper or 1 sheets of 0,2mm foil at
once)..
•Punching
Press the handle down to punch the document. Take out punched sheets.
Binding
•Opening the plastic comb
Place plastic comb into the binding mechanism facing upwards the side to be
opened. Pull the handle down slowly. Insert punched document into the open
comb.
•Closing the plastic comb
Push forward the handle to close the comb and take out the documents
Technical Data:
Max paper format: A4
max punching capacity: 15 *
max binding capacity: 450
Max comb diameter: 45 mm
Number of releasable knives: 24
Margin depth adjustment: 4 progi
Dimensions (H x W x D): 240 x 450 x 250 mm
Net weight: 6,3 kg
Gross weight: 6,8 kg
*80g/m² papier
19.11.2012
dystrybutor: OPUS Sp. z o.o. ●ul. Toruńska 8 ●44 – 122 Gliwice ●www.opus.pl