Opus COIL BONO User manual

User’s guide
COIL BONO
User’s guide Coil Bono

User’s guide Coil Bono
Safety precautions
•Before operating the machine please read the user’s guide carefully. Operate machine according to the user’s guide.
Pay special attention to the max punching and binding capacity.
•The machine should be kept out of children’s reach.
•Do not use the machine to punch hard materials, such as metal →it may cause the damage.
•Pay special attention while stretching the plastic comb. Do not reach or put fingers into the open comb →danger of
injury!
•The machine should be protected against dust and moisture. Do not allow any liquid to get inside the unit.
Recommendations
•The machine is designed to bind documents with the plastic combs only.
•Unpack and install all the elements of the device and put it on a sturdy and level surface.
•Before punching important documents, test the settings of the machine on a sheet of paper.
•The machine punches 12 sheets of paper or 2 plastic covers at one time. Paper and the plastic covers should be
punched separately! To make punching easier plastic covers can be placed between two sheets of paper. DO not
exceed max punching capacity!
Construction of the machine
1. Handle
2. Paper format slider
3. Base
4. Paper thickness diagram
5. Waste bin
6. Different sizes of spirals
7. Slot of max punching capacity
8. Paper slot
Recommendations
The machine is designed to bind documents with the spiral combs only.

Operation
NOTE! Before putting
the machine into operation install the machine
a sturdy and level surface.
1. Preparing before punching
•Put the documents in order.
•Choose co
rrect comb size and adjust margin depth
inside the waste bin.
2. Punching
•Insert the document
into the paper slot,
handle down to punch the sheets.
•
Please check margin and paper position before punching official documents
•Do not exceed recomm
ended max punching capacity!
capacity is not
exceeded, insert the paper into the max punching capacity slot
•Punch all the documents
completely at one time
3. Binding
•
Put the document to bind in order and
documentation into the spirals from left to right
•
To keep the spiral in the place, it is necessary to bend
to machine.
4. Cleaning up the waste bin
The waste bin is designed for paper scraps and waste of punching.
on how often the machine is operated.
1. Pull out and
remove the paper scraps
2. Insert the waste bin into the unit.
Please clean up the waste bin regularly!
Technical data:
Max punching capacity:
12 pages* or 2
Max Binding capacity:
fill into all spirals
Max format:
A4
Hole distance:
6 mm
Hole quantity:
49
Dimension of hole: Ø
4 mm
Net Weight:
4,6kg
Dimensions (DxSxW):
405x290x165mm
*80 g/m² papier
31.08.2009
dystrybutor: OPUS Sp. z o.o. ●ul. Toruńska 8 ●44 – 122 Gliwice ●
www.opus.p
the machine into operation install the machine
on
rrect comb size and adjust margin depth
using diagram of com size placed
into the paper slot,
so that it touches back of the
slot. Press the
Please check margin and paper position before punching official documents
.
ended max punching capacity!
To check i
f the max punching
exceeded, insert the paper into the max punching capacity slot
.
completely at one time
.
Put the document to bind in order and
place them on an even level, then insert the
documentation into the spirals from left to right
.
To keep the spiral in the place, it is necessary to bend
the ends using the pliers attached
The waste bin is designed for paper scraps and waste of punching.
The frequency of cleani
remove the paper scraps
.
12 pages* or 2
covers
fill into all spirals
A4
6 mm
49
4 mm
4,6kg
405x290x165mm
www.opus.p
l
User’s guide Coil Bono
using diagram of com size placed
slot. Press the
f the max punching
place them on an even level, then insert the
the ends using the pliers attached
The frequency of cleani
ng up the waste bin depends