Palram Glory 8'x8' Premium Class Greenhouse User manual

i
AssemblyInstructions
GloryTM 8'x8'- Premium Class Greenhouse
Approx. Dim.
244L x 244.5W x 268.5Hcm / 96.3"L x 96.3"W x 105.7"H
4' Extention Module
119.5L x 244.5W x 268.5Hcm /47"L x 96.3"W x 105.7"H
ire
Extension Kit
Extension Kit
Optional:
After Sale Service
Email: [e-mail]
USA 877-627-8476 England 01302-380775 I France 0169-791 -094
Canada 1 800-866-5749 Germany 0180-522-8778 International [phone]
www.palramapplications.com J

IMPORTANT
Please read these instructions carefullybefore you start to assemble this greenhouse.
Keep these instructions in a safe place forfuture reference.
» Customer Service
For assistance with assembly or for replacement parts - please log onto our website
or call our service line (number is on the title page).
Additional information can be found at our website: www.palramapplications.com
» Safety Advice
It is of utmost importance to assemble all of the parts according to the directions.
Do not skip any step.
We strongly recommend using workgloves during panels' sliding.
Always wear shoes and safety goggles when working with extrudedaluminium.
If using a step ladder or power tools make sure that you follow the manufacturer's
safety advice.
Do not touch overhead power cables with the aluminium profiles.
Do not attempt to assemble the greenhouse in windy or wet conditions.
Dispose ofall plastic bags. Keep them out of reach of small children.
Keep children away from the assembly area.
Do not lean against or push the greenhouseduring construction.
Do not position your greenhouse in an area exposed to excessive winds.
Do not attempt to assemble this greenhouse if you are tired, have taken drugs or
alcohol or if you are prone to dizzy spells.
Hot items such as recently used grills, blowtorches etc. must not be stored in the
greenhouse. Make sure there are no hidden pipes or cables in the ground before
inserting the pegs.
This product is designed to be used as a greenhouse only.
Note: You should anchor the greenhouse directly to a solid foundation; Make sure
that there are no obstructions between the assembly area and the final position.
» Care & Maintenance
When your greenhouse needs to be cleaned, use a mild detergent solution and rinse
with cold clean water.
DO NOT use acetone, abrasive cleaners or other special
detergents to clean the clear panels.
» Tools & Equipment
Work gloves
Phillips head screwdriver
Adjustable Spanner /Wrench
Leveler
Tape measure
Step ladder
Scissors
Electric screwdriver (10mm, 7mm, Phillips)
Lubricant (Optional)
T001 - Special tool for Screws 411 and nuts 412
» Before Assembly
Rt Selecting a site:
- The greenhouse must be positioned and fixed on a flat level surface.
- Choose a sunny position away from overhanging trees.
Rt We strongly recommend this greenhouse to be secured directly to a solid concrete
foundation.
Rt This is a multi-part assembly bestachieved by two people. Allow at least
half a day for the assembly process.
Rt Take all components & parts out ofthe packages. Sort the parts and check against the
content parts list.
Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they
do not get lost.
lPlease note multi-sided profiles are used in this greenhouse. As a result some holes in
the profiles are not used during assembly.
lPlease review entire instructions before starting. Carry out the assembly steps in exact
order.
Rt Prior to fitting the Automatic Vent Opener, the power-tube has to be cooled by placing
it in a refrigerator for approximately 30 minutes.
Rt The drawings in this manual are designed for 8'x8'greenhouse + 4'Extension Kit.
Please note that content list refers only for 8x8 greenhouse.
Note: all the extension module steps are marked with a dashed outline integrally in the
greenhouse assembly process.
-,

8'x8' 4' Ext. 8'x1 2'
/ .!
'Iii
Model Base Length No. ofPackages
Glory Standard (8'x 8') 244.5 cm / 96.3" 2
Glory + 4' Ext. (8'x 12') 364 cm / 143.3" 3
Glory + 4' Ext. x2 (8'x 16') 483.5 cm / 190.4" 4
Glory + 4' Ext. x3 (8'x 20') 603 cm / 237.4" 5
>> During Assembly
You may use Silicon lubricant spray in order to help you slide the panels into the profiles.
Do not spray the Polycarbonate panels.
Use a rubber mallet if necessary.
All panels with the stamped wordsTHIS SIDE OUT must be facing out to create full UV
protection. Remove plastic sticker as panels are locked in place.
The AutoVent Opener has a separate assembly instruction in its own package.
During assembly you will encounter the information icon, please refer to the
relevant assembly step for additional comments and assistance.
This icon indicates
that the installer should
be inside the product.
This icon indicates that
1 the installer should be
outside the product.
Step 1: Paste an insulating tape on each open ends of all panels (including panels in the Extension
package)
Step 11: Please make sure the screw connection is made exactly as illustrated.
A - Connect the screw in the left hole. B - Connect the screw in the right hole.
Step 22: Part 7943 (Side Louver Window) can be located only on one of the two central panels.
* If you assemble the greenhouse with an extension module, the window can be placed on all
panels, except for the last two end panels.
* Note: The selected placing will affect the next assembly steps.
Step 33: Roof window can be located only on one of the two central roof panels.
* If you assemble the greenhouse with an extension module, the roof windows must be placed on
panels only as specified in the manual.
* Note: The selected placing will affect the next assembly steps.
Step 38: Please tighten screws from inside the greenhouse. In addition, please tighten the
remaining loose screws.
Step 43: As mentioned at the 'Before Assembly'section, prior to fitting the Automatic Vent
Opener, the power-tube has to be cooled by placing it in a refrigerator for approximately 30
minutes.
Step 52: Door can be installed as a left hand door or right hand dooras peryour decision.These
instructions show a right hand door assembly. Please determine door opening direction. This
decision will affect the next assembly steps.
Step 54: Please adjust the hinges height in accordance with the upper post and lower ramp of the
door aperture, as specified in Level C.
Step 58: Threading parts 7888 exactly as specified in Level C, is very important in order to create
good drainage.
Step 62: Anchor the greenhouse only onto a hard surface (supplied bolts fit only hard surface such
as concrete or asphalt).
/ \ Important Recommendations
Firmly connect the greenhouse to a level surface immediately after completion
ofthe assembly.
Tighten all screws once assembly is completed.
Screws 411 and nuts 466 are used throughout the assembly process.
Screws 411 are to be assembled from the outside and nuts 466 from the inside ofthe greenhouse.
If not specified otherwise, do not fasten screws and nuts (411 & 466) more than 2 -3 turns only.
Do not tighten them until completion ofthe panels'assembly.These 2 icons indicate if screws'
tightening is required or not.
However, in some steps, temporarytightening of a few screws may be needed to prevent a profile
from falling.

lb I
is
244 cm /
8'x12'
(8'x8'+ Extension)

Contents
Item
7895
7896
7899
7599
7887
7891
7885
7892
7890
7884
7880
7889
Qty.
%I
Item
7883
7881
7882
7888
7879
7878
7886
256
Qty.
I7914
Item
2 7893
989
991
1
1
2
1
8017
7868
2 7869
8
Qty.
.
i
I.
I
. I.
2
1
1
i' 2
1
1
1

Contents
Item
7904
7903
7906
7902
7901
7907
7900
7905
59 x 74 cm
23"x29"
59 x 62 cm
23"x24"
62 x 71.5 cm
24"x28"
Qty.
2
2
7
4
11
1
3
3
Item Qty. Item
0))))))))))))007%
7602
7908
7909
7910
4016
425
413
450
Qty. Item
4 8016
7898
2
7894
2 7897
2 8038
8037
2
2 4000
2 4010
12
(+2) 433
Qty.
1
6
6
2
8
6
11)mn»»»)0»um 8
8
8

Contents
Item
T001
70
7009
8101 IC36
Qty.
1
10
2
1
7943 1
7942
964
465
422
er
1
2
4
4
Item Qty.
7923
7919
7918
7920
7921
7924
7922
4
c o
4
2
2
2
2
8
2
Item
7994
7995
7996
7948
7912
7913
8039
7993
f:1 a
Íc9 o 7)
,°\
Qty.
1
1
2
2
1
1
3
1

Contents
Item
r
i7601
1 7597
1
7885
7892
1 7926
1
1
I17927
I
II 7928
1
I
II 989
1I
1 991
1
1
1 7878
1
1
7890
IIIL
Extension Kit
Qty. 7
. .
, .
,
. .
._.
. .
Item
r
11
I '7942
2 I11111
4 11
1 1 465
4 I1I 1 422
11
I 18102
1 I1II1 1 7914
I1
2 i7911
11
2 II11
1 17900
I1
1 II1 1 7907
I1
1 1111I 1 7906
2 I11111
I I 7901
1 II
964
J L
05'
Qty. 7
59 x 74 cm
23"x29"
59 x 62 cm
23"x24"
.__... ..._..._, .-. __.....,
Item
r
11
1
1 1 7898
I111
2 i ' 7894
11
4 1 1
1 17944
4 1 1
11
1 1 1 7930
1111
2 i'7929
1
111111
1 1 7931
111111
1 1 1
1111
1 I 8038
3 1 1
111111
4 1 1 8037
IIJ L
Qty. Item
9 r11
2 I 1 461
11II4 I 1 411
IIII1I
2 I I 466
II1I
I 17442
II11I 4008
1
1
2
1
IIII1I
I 14000
IIII1III
1 1 4010
2 1IIII
3
1II1 433
I 17009
IIJ L
Qty. 7
1
16 I
( +2)
44(+5) I
1
I
1
1
64( +7)
16
( +2)
2
( +5)
2
1
1
1
1
1
1
1
1
1
1
I
I
1
1
I
I
1
1
I
2 1
1
1
1
2 1
1
2 1
I
J

1
L.
8101 1
in
Extension Kit
I
8102
IN
f
;
i
R
,i
1

2
7895 . , 1 7896 - ,.,
1 1
%. ,
. , 1 7442 2
...

3
7897 2 7899 2
7897
16
7897
I ic
I

4
7958 4 7523 6 8010 2
'Ir
RI 7523
17958 I

5 For Extension Kit Only
7599 7601
7597
Extension Kit 7601 íí
8'x12'i,,/
(8'x8'+ Extension) % 7597
Ix21
7599
7601
7597
7601
7597 8'x16'
(8'x8'+ 2 Extensions)
x2
r
7442

6
7602 4 7599 3 7442 16
7442

7
7889 4 411 8 466 8
O/
%

8
256 .- .. 8
o o A.
%
411 16 466 16

9 For Extension Kit Only
7883 2 7929
7928 I,
I 2 7944
I
lik
I.
Extension Kit 8'x12'
(8'x8'+ Extension
2 411
2 466
12
12
- - - 7
I
I
I
I
I
I
I
I
I
I
I

lo
7883 2
411
466
8
8

11
411 7 466 7
e -®
M.
Extension Kit
1L -- .
1
411 +4 I
1
466 +4 I
1

12
2 7892 2