Parker D1FV EE Series User manual

Bulletin MSG11-5715-728/UK
Proportional Pressure
Reducing Valve /
Proportional DC Valve
Brief Operation Manual
Series
D1FV*EE (Design series 13)
D1FB*EE (Design series 18)
D*1FB*EE (Design series 13)
II 2 G c T4 Gb
-20 °C ≤ Ta≤ +40 °C
D*1FB*EEXG371
-20 °C ≤ Ta≤ +60 °C
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
Tel.: [phone]
E-mail: [e-mail]
Copyright © 2020, Parker Hannin Corp.

2
Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
Please notice:
Prior to commissioning, this brief operation manual must be read and understood. The safety in-
structions must be strictly observed. Parker disclaims any liability for damage resulting from non-
compliance with the safety instructions listed here.
The detailed and current operation manuals for the individual valve series can be found on the Par-
ker homepage at www.parker.com/isde in the “Support” area. Or download the current manuals
by scanning the following QR codes:
D1FV*EE D1FB*EE D*1FB*EE
The ProPxD parameterizing software can be downloaded free of charge at www.parker.com/isde
in the “Support“ area or directly at www.parker.com/propxd.
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DE-
SCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users
having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selec-
tion of the system and components and assuring that all performance, endurance, mainte-
nance, safety and warning requirements of the application are met. The user must analyze all
aspects of the application, follow applicable industry standards, and follow the information
concerning the product in the current product catalog and in any other materials provided
from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specifications provided by the user, the user is respon-
sible for determining that such data and specifications are suitable and sufficient for all
applications and reasonably foreseeable uses of the components or systems.
WARNING — USER RESPONSIBILITY

Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
3Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
EC declarations of conformity

4
Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20

Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
5Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20

6
Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20

Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
7Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
Attention: safety instruction, please note and implement!
A1. Delivery - Please check the delivery immediately after receiving the product if the content is mat-
ching with the specied scope of supply and for apparent damages due to shipping.
A2. Information obligation - Information regarding safety and health in product documentations must
be read and understood before the customer-specic application (e.g. commissioning and mainte-
nance) and before general use (e.g. storage, transport).
A3. Intended use - If our product is not used for the intended purpose, or structurally modied, impro-
perly used, or there is a failure caused by external impact or force majeure, danger may occur which were
not considered by the manufacturer. Damages resulting from this are not the responsibility of Parker.
A4. Marking, name plates - Instructions applied on the electronics, i.e. wiring diagrams and name
plates, must be observed and maintained legibly.
A5. Work at the electronics and hydraulics - Installation and commissioning of the electronics may
only be allowed by qualied personnel.
All prescribed requirements for the protection of users must be implemented and complied with be-
fore commissioning/installation/dismantling of the hydraulic components. It should be noted that na-
tional schemes for safety must be observed.
Produktspezifisch (P)
P1. Electronic control system - The valve must be operated by a suitable electronic control system.
Connecting to an unsuitable electronic control system may result in irreparable damage to the valve or
the electronic control system.
P2. Temperature - During application, the product may heat up at the surface and exceed the burn
threshold. Even short-term contacts may lead to burns. T emperatures of more than 80 °C may cau-
se malfunctions of the onboard electronics.
ATEX specific (E)
E1. ATEX specific annexes (chapters) must be observed.
E2. Work on the valve - Throughout any installation, commissioning, maintenance and repair work,
it is the responsibility of the operator to ensure that there is no risk of explosion.
Before starting such work, the operator has to ensure that tools and equipment are only used if they
do not damage the valve and they do not leave behind residues that are inammable.
In addition, clean the valve before starting such work, in particular removing dust, liquids and other depo-
sits. Cleaning should be done using a lint-free cloth. Tools may not be used if they might cause a static
charge on use.
E3. Pressure fluids - The pressure uid must have an ignition temperature of at least 50 K above the
maximum surface temperature of the valve (see EN 13463-5 and IEC 60079-4).

8
Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
D*1FB*EE
D1FV*EE
D1FB*EE
Name plate
Manufacturer's logo and address
CE mark, Ex protection symbol and explosion protection
class of the complete valve to European Directive 2014/34/EU
Serial number (PTS ID: eight-digit number, barcode)
Entire name of the complete valve
Hydraulic data
QR-code (internal use)
Hydraulic symbol
Code for year and month of manufacture
Manufacturer's logo and address
CE mark, Ex protection symbol and explosion protection
class of the complete valve to European Directive 2014/34/EU
Serial number (PTS ID: eight-digit number, barcode)
Entire name of the complete valve
Hydraulical data
QR-code (internal use)
Hydraulic symbol
Code for year and month of manufacture
Manufacturer's logo and address
Serial number (PTS ID: eight-digit number)
QR-code (internal use)
Hydraulic symbol
CE mark, Ex protection symbol and explosion protection
class of the complete valve to European Directive 2014/34/EU
Hydraulic data
Code for year and month of manufacture
Entire name of the complete valve

Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
9Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
Electrical characteristics
Duty ratio [%] 100
Protection class , Ex e mb IIC T4 Gb, IP66 (plugged and mounted correctly)
Solenoid K J J*XG371
Supply voltage [V] 12 24 24
Current consumption [A] 2,3 1,15 1,0
Resistance [Ohm] 3,0 12,0 12,0
Solenoid connection Box with M20x1.5 entry for cableglands. Solenoid identicationas per ISO 9461.
Wiring min. [mm²] 3 x 1.5 recommended
Wiring lenght max. [m] 50 recommended
General
Design
D1FV, direct operated proportional pressure reducing valve
D1FB, direct operated proportional DC valve
D*1FB, pilot operated proportional DC valve
Actuation Proportional solenoid
D1FV; D1FB D*1FB
Size NG06
CETOP 03
NG10
CETOP 05
NG16
CETOP 07
NG25
CETOP 08
NG32
CETOP 10
Mounting interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPA
Mounting position unrestriced
Ambient temperature [°C] -20...+40; XG371: -20...+60
MTTFDvalue [Jahre] 150 75
Weight [kg] 3.5 (2 solenoids),
2.5 (1 solenoid) 9.4 12.8 20.3 69.3
Hydraulic
Max. operating pressure
[bar] Ports P, A, B 350;
port T 185 (D1FV),
210 (D1FB)
Pilot drain internal: P, A, B, X 350; T, Y 185
Pilot drain external: P, A, B, T, X 350; Y 185
Fluid Hydraulic oil as per DIN 51524...535, other on request
Fluid temperature [°C] -20...+40; XG371: -20...+60
Viscosity permitted [cSt] /
recommended [cSt] /
[mm2/s]
[mm2/s]
20...400
30...80
Filtration ISO 4406; 18/16/13
Max. ow [l/min] D1FV: 10
Min. primary pressure [bar] D1FV: 30
Nominal ow at ∆p=5 bar
per control edge * [l/min]
D1FB*0: 6/12/20;
D1FB*3: 10/20/30 75/90/120 130/200 250/400 1000
Leakage at 100 bar [ml/min] D1FB*0: <50;
D1FB*3: <60 100 200 600 1000
Overlap
[%]
D1FB:
25, electrically
normalized at 10
(see data sheet)
-
Pilot supply pressure [bar]
[bar] -min. 30 (+ T/Y pressure), max. 350 optimal dynamics at 50
Pilot ow at 100bar [l/min] - <0,5 <1,2 <1,2 <1,2
Pilot ow, step response [l/min] - 2,0 1,9 4,5 18
Static / Dynamic
Step response at 100% step [ms] 30 50 75 100 180
Hysteresis [%] D1FV, D1FB*0: <4;
D1FB*3: <6
<5
Temperature drift solenoid current [%/°K] <0,02
Technical data
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
* Flow rate for different ∆p per control edge: Qx= QNom. · √∆px
∆pNom.

10
Proportional Pressure Reducing Valve /
Proportional DC Valve Brief Operation Manual
Parker Hannifin Corporation
D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20
D*1FB*EE
Direct operated proportional pressure reducing valve
Direct operated proportional DC valve
Pilot Operated Proportional DC Valve
D1FV*EE
ISO 4762-12.9 Surface finish
D1FB, D1FV 4x M5x30 7.6 Nm ±15 %
R 6,3
max
0,01/100
D31FB 4x M6x40 13.2 Nm ±15 %
D41FB 2x M6x55; 4x M10x60 13.2 Nm; 63 Nm ±15 %
D91FB 6x M12x75 108 Nm ±15 %
D111FB 6x M20x90 517 Nm ±15 %
Electrical connection, see D14-2114PD-* in the annex.
D1FB*3*EE, spool/body design D1FB*0*EE, spool/sleeve design
AB
Manual
override
Manual
override
Manual
override
Manual
override
Manual
override
Manual
override