PAX S920 User manual

ePAYP2PE_PAXS920QRGRedeployment071019
PAX S920
Quick Reference Guide

Retail PAX S920 Quick Reference Guide
Terminal Display Action
2. DEBIT Press DEBIT.
2. SALE Press SALE.
Enter the amount of the payment and press the green
button.
Insert/Tap/Swip Card Insert, tap or swipe the card.
Debit Sale
Terminal Display Action
1. CREDIT Press CREDIT.
1. SALE Press SALE.
Enter the amount of the payment and press the green
button.
Insert/Tap/Swip Card Insert, tap or swipe the card.
Credit Sale
Credit Return
Terminal Display Action
1. CREDIT Press CREDIT.
3. RETURN Press RETURN and enter the amount.
Enter the amount of the payment and press the green
button.
Insert/Tap/Swip Card Insert, tap or swipe the card.
Credit Void Sale
Terminal Display Action
1. CREDIT Press CREDIT.
4. V/SALE Press the down arrow.
1. SALE Press SALE.
Enter the transaction number and press the green button.
Terminal Display Action
Press Func key.
2. Batch Tap Batch.
1. Batch Close Tap Batch Close.
Batch Settlement

Retail PAX S920 Quick Reference Guide
Setup or Technical Support Questions?
1-855-226-7337
https://www.illinoistreasurer.gov/Local_Governments/ePAY_Overview
Terminal Display Action
Press the Func key.
Press the down arrow.
2. Reprint Press the Reprint key.
1. Last Cust. Rcpt.
OR
2. Any Receipt
Press the Last Cust. Rcpt. or Any Receipt.
1. Las Cust. Rcpt. Last Cust. Rcpt. will print out the last customer receipt.
2. Any Receipt If Any Receipt was selected, tap Credit or Debit
depending on the sale type.
Enter the Transaction number and press the green
button.
Re-Print Receipt
Terminal Display Action
Press the Func key.
1. Report Press the Report key.
Print Batch Report
Terminal Display Action
Hold green button and press the 1 key.
1. Reports Tap Reports.
Enter password and press the green button.
2. Current Report Press Current Report.
CUR. REPORT TYPE: Press the report type desired and set the default
report and then tap the desired options.
Yes Press Yes to keep the report as the default report.
Change Default Report

You need to ship your original terminal and charging cables back using the
packaging and mailing label provided.
REMINDER
ePAYP2PE_PAXS920QRGRedeployment071019
What’s included:
Connecting your terminal:
S920 charging cable Charging dock and power cord*
*This must be added on to your original order. Additional fees will apply.*
To charge your terminal you can either:2.
• You will also need to charge your
charging dock with the power
cord included.
• Place it on the charging dock.• Connect it to the charging cable.
OR
1. Verify your bag number in your ePAY portal https://epay.jtpyportal.com to
ensure you have received the correct terminal. For more information on where to
conrm your bag number, please refer to page 9 on our P2PE Instruction Manual
(PIM), which can be found at: https://www.jetpay.com/pim.
Note: Before proceeding, please ensure your S920 packaging has not been tampered with.
Point to Point Encryption (P2PE)
Immediate data encryption keeping your clients data secure.
Technical Requirements:
• Standard 110 volt power outlet
• An ethernet switch port for each device
• A xed IP address on your internal network that is reachable from the workstation
that will be used for payment processing