Planet VIP-5060PT User manual

VIP-5060PT VIP-5060PT
Quick GuideQuick Guide
2011-D10510-000
PLANET Technology Corporation
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright ©2013 PLANET Technology Corp. All rights reserved.
Quick Guide
Step 4. Computer Network Setup
Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.1 (type this address in the
address bar of web browser).
You’ll be prompted to input user name and password: admin and 123
Step 5. Login Prompt
Power Adapter StandRJ-45 cableHandset CordHandset
CD-ROM
Step 1. Handset Connection
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus VIP-5060PT. If any item is missing or damaged, please contact the seller immediately.
Step 2. Connecting Power System
NOTE : 1. Use only the power adapter shipped with the unit to ensure correct functionality
2. Only WAN supports POE.
Further Configuration
For detailed configuration, please check user’s manual on the bundled CD.
If you have any other question, please contact the dealer where you purchased this product or you can contact PLANET directly at the
following: Email address: [e-mail]
The VIP-5060PT can be powered either by externalAC/DC adapter or by connecting to an IEEE802.3af/at PSE device such as 802.3af Injector /
Hub or 802.3af/at POE switch.
Once the VIP-5060PT is powered, the LCD screen will prompt for POST.
Step 3. Connecting Network
Plug one end of the handset cord into the handset and the other end into the handset jack
Set your computer’s IP address to 192.168.0.x, where x is a number between 2 to 254 (except 1 where is being used for the phone by
default). If you don’t know how to do this, please ask your network administrator. Connect your PC to VIP-5060PT PC port.
PoE Switch
Handset
Internet
IP PBX
PoE Switch PC

VIP-5060PT VIP-5060PT
Quick GuideQuick Guide
2011-D10510-000
PLANET Technology Corporation
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright ©2013 PLANET Technology Corp. All rights reserved.
Quick Guide
Step 4. Computer Network Setup
Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.1 (type this address in the
address bar of web browser).
You’ll be prompted to input user name and password: admin and 123
Step 5. Login Prompt
Power Adapter StandRJ-45 cableHandset CordHandset
CD-ROM
Step 1. Handset Connection
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus VIP-5060PT. If any item is missing or damaged, please contact the seller immediately.
Step 2. Connecting Power System
NOTE : 1. Use only the power adapter shipped with the unit to ensure correct functionality
2. Only WAN supports POE.
Further Configuration
For detailed configuration, please check user’s manual on the bundled CD.
If you have any other question, please contact the dealer where you purchased this product or you can contact PLANET directly at the
following: Email address: [e-mail]
The VIP-5060PT can be powered either by externalAC/DC adapter or by connecting to an IEEE802.3af/at PSE device such as 802.3af Injector /
Hub or 802.3af/at POE switch.
Once the VIP-5060PT is powered, the LCD screen will prompt for POST.
Step 3. Connecting Network
Plug one end of the handset cord into the handset and the other end into the handset jack
Set your computer’s IP address to 192.168.0.x, where x is a number between 2 to 254 (except 1 where is being used for the phone by
default). If you don’t know how to do this, please ask your network administrator. Connect your PC to VIP-5060PT PC port.
PoE Switch
Handset
Internet
IP PBX
PoE Switch PC