Qlight Microlectra QTG50 User manual

PB 1
Modular LED Signal Tower Lights
QTG50/ QTG60/ QTG70
54 65
85dB
5030
QTG50/ 60/ 70L
-3-110/220 -RAG -LW18
[Model number]
[Layer count] [Voltage] [Color] [Mounting option]
| | | | |
• QTG50/ 60/ 70L
• QTG50/ 60/ 70L-BZ
• QTG50/ 60/ 70LF
• QTG50/ 60/ 70LF-BZ
• QTGA50/ 60/ 70L
• QTGA50/ 60/ 70L-BZ
• QTGA50/ 60/ 70LF
• QTGA50/ 60/ 70LF-BZ
• 1 Layer
• 2 Layers
• 3 Layers
• 4 Layers
• 5 Layers
• 12-DC12V
• 24-DC24V
• 110/220
-AC110V~220V
R-Red
A-Amber
G-Green
B-Blue
W-White
• (Blank)
- Standard type
• Mounting type
- LB18/24 - L W 18/24
- QZ18/24 - SZ18/24
- QL18/24 - SL18/24
- QLA18/24
QTG50/ 60/ 70ML
-3-110/220 -RAG
[Model number]
[Layer count] [Voltage] [Color]
| | | |
• QTG50/ 60/ 70ML
• QTG50/ 60/ 70ML-BZ
• QTG50/ 60/ 70MLF
• QTG50/ 60/ 70MLF-BZ
• QTGA50/ 60/ 70ML
• QTGA50/ 60/ 70ML-BZ
• QTGA50/ 60/ 70MLF
• QTGA50/ 60/ 70MLF-BZ
• 1 Layer
• 2 Layers
• 3 Layers
• 4 Layers
• 5 Layers
• 12-DC12V
• 24-DC24V
• 110/220-AC110V~220V
R-Red
A-Amber
G-Green
B-Blue
W-White
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o󰘯 the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s speci󰘰cation.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, 󰘰re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, and or malfunction of
the product that would void the warranty.
1. During wiring or maintenance, please completely turn o󰘯 the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a 󰘰re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to 󰘰re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to 󰘰re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, 󰘰re, electric shock and loss of life.)
Ordering Specications
Microlectra bv.

2 3
• QTG50L
• QTG60L
• QTG70L
• QTG50ML
• QTG60ML
• QTG70ML
Product Specications
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG50L
Steady
QTG50L-BZ
Steady/w built-in
buzzer
QTG50LF
Steady/Flashing
QTG50LF-BZ
Steady/Flashing
/w built-in buzzer
QTGA50L
Steady
QTGA50L-BZ
Steady/w built-in
buzzer
QTGA50LF
Steady/Flashing
QTGA50LF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.080A
0.045A
Max. 0.045A
DC 24V
only
DC 24V
only
0.34kg
0.34kg
0.44kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.160A
0.090A
Max. 0.065A
0.43kg
0.43kg
0.53kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.240A
0.135A
Max. 0.080A
0.51kg
0.51kg
0.61kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.320A
0.180A
Max. 0.100A
0.60kg
0.60kg
0.70kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.400A
0.225A
Max. 0.120A
0.68kg
0.68kg
0.78kg
R-Red
A-Amber
G-Green
B-Blue
W-White
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG60L
Steady
QTG60L-BZ
Steady/w built-in
buzzer
QTG60LF
Steady/Flashing
QTG60LF-BZ
Steady/Flashing
/w built-in buzzer
QTGA60L
Steady
QTGA60L-BZ
Steady/w built-in
buzzer
QTGA60LF
Steady/Flashing
QTGA60LF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.090A
0.050A
Max. 0.050A
DC 24V
only
DC 24V
only
0.41kg
0.41kg
0.51kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.180A
0.100A
Max. 0.072A
0.50kg
0.50kg
0.60kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.270A
0.150A
Max. 0.094A
0.58kg
0.58kg
0.68kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.360A
0.200A
Max. 0.116A
0.67kg
0.67kg
0.77kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.450A
0.250A
Max. 0.138A
0.75kg
0.75kg
0.85kg
R-Red
A-Amber
G-Green
B-Blue
W-White
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG70L
Steady
QTG70L-BZ
Steady/w built-in
buzzer
QTG70LF
Steady/Flashing
QTG70LF-BZ
Steady/Flashing
/w built-in buzzer
QTGA70L
Steady
QTGA70L-BZ
Steady/w built-in
buzzer
QTGA70LF
Steady/Flashing
QTGA70LF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.090A
0.050A
Max. 0.050A
DC 24V
only
DC 24V
only
0.54kg
0.54kg
0.64kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.180A
0.100A
Max. 0.072A
0.66kg
0.66kg
0.76kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.270A
0.150A
Max. 0.094A
0.81kg
0.81kg
0.90kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.360A
0.200A
Max. 0.116A
0.96kg
0.96kg
1.06kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.450A
0.250A
Max. 0.138A
1.20kg
1.20kg
1.29kg
R-Red
A-Amber
G-Green
B-Blue
W-White
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG50ML
Steady
QTG50ML-BZ
Steady/w built-in
buzzer
QTG50MLF
Steady/Flashing
QTG50MLF-BZ
Steady/Flashing
/w built-in buzzer
QTGA50ML
Steady
QTGA50ML-BZ
Steady/w built-in
buzzer
QTGA50MLF
Steady/Flashing
QTGA50MLF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.080A
0.045A
Max. 0.045A
DC 24V
only
DC 24V
only
0.19kg
0.19kg
0.29kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.160A
0.090A
Max. 0.065A
0.27kg
0.27kg
0.37kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.240A
0.135A
Max. 0.080A
0.36kg
0.36kg
0.46kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.320A
0.180A
Max. 0.100A
0.44kg
0.44kg
0.54kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.400A
0.225A
Max. 0.120A
0.53kg
0.53kg
0.63kg
R-Red
A-Amber
G-Green
B-Blue
W-White
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG60ML
Steady
QTG60ML-BZ
Steady/w built-in
buzzer
QTG60MLF
Steady/Flashing
QTG60MLF-BZ
Steady/Flashing
/w built-in buzzer
QTGA60ML
Steady
QTGA60ML-BZ
Steady/w built-in
buzzer
QTGA60MLF
Steady/Flashing
QTGA60MLF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.090A
0.050A
Max. 0.045A
DC 24V
only
DC 24V
only
0.26kg
0.26kg
0.36kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.180A
0.100A
Max. 0.065A
0.34kg
0.34kg
0.44kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.270A
0.150A
Max. 0.094A
0.43kg
0.43kg
0.53kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.360A
0.200A
Max. 0.116A
0.51kg
0.51kg
0.61kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.450A
0.250A
Max. 0.138A
0.59kg
0.59kg
0.69kg
R-Red
A-Amber
G-Green
B-Blue
W-White
Model number
Layer
count
Voltage Current Certicate Weight Color
QTG70ML
Steady
QTG70ML-BZ
Steady/w built-in
buzzer
QTG70MLF
Steady/Flashing
QTG70MLF-BZ
Steady/Flashing
/w built-in buzzer
QTGA70ML
Steady
QTGA70ML-BZ
Steady/w built-in
buzzer
QTGA70MLF
Steady/Flashing
QTGA70MLF-BZ
Steady/Flashing
/w built-in buzzer
1
AC/DC12V
AC/DC24V
AC110V~220V
0.090A
0.050A
Max. 0.050A
DC 24V
only
DC 24V
only
0.42kg
0.42kg
0.52kg
R-Red
2
AC/DC12V
AC/DC24V
AC110V~220V
0.180A
0.100A
Max. 0.072A
0.56kg
0.56kg
0.66kg
R-Red
G-Green
3
AC/DC12V
AC/DC24V
AC110V~220V
0.270A
0.150A
Max. 0.094A
0.77kg
0.77kg
0.87kg
R-Red
A-Amber
G-Green
4
AC/DC12V
AC/DC24V
AC110V~220V
0.360A
0.200A
Max. 0.116A
0.92kg
0.92kg
1.02kg
R-Red
A-Amber
G-Green
B-Blue
5
AC/DC12V
AC/DC24V
AC110V~220V
0.450A
0.250A
Max. 0.138A
1.07kg
1.07kg
1.17kg
R-Red
A-Amber
G-Green
B-Blue
W-White

2 3
QTG60ML : DC
QTG60MLF : DC
QTG60ML-BZ : DC
QTG60ML : AC
QTG60MLF-BZ : DC
QTG60MLF : AC
QTG60ML-BZ : AC
QTG60MLF-BZ : AC
QTG60L : DC
QTG60LF : DC
QTG60L-BZ : DC
QTG60L : AC
QTG60LF-BZ : DC
QTG60LF : AC
QTG60L-BZ : AC
QTG60LF-BZ : AC
Ø60
Ø60
Ø60
13.5
13.5
13.5
50
L1
12
12.550
85
123
L2
L3
50
50
12
12.5
12
12.5
Ø14 CABLE ENTRY
PCD 40
360˚/3-M4 BOLT
BUZZER VOLUME
CONTROL LEVER
BUZZER VOLUME
CONTROL LEVER
LAYER
1
2
3
4
5
L1
126
176
226
276
326
L2
161
211
261
311
361
L3
199
249
299
349
399
LAYER
1
2
3
4
5
L1
352
402
452
502
552
L2
387
437
487
537
587
L3
425
475
525
575
625
Ø60
13.550
Ø60
13.550
Ø60
13.550
L1
62
97
135
26.5200
26.5200
26.5200
L2
L3
Ø18 Ø18 Ø18
M18Ⱌ1.5 THREADM18Ⱌ1.5 THREADM18Ⱌ1.5 THREAD
QTG70ML : DC
QTG70MLF : DC
QTG70ML-BZ : DC
QTG70ML : AC
QTG70MLF : AC
QTG70ML-BZ : AC
QTG70MLF-BZ : DC
QTG70MLF-BZ : AC QTG70L : DC
QTG70LF : DC
QTG70L-BZ : DC
QTG70L : AC
QTG70LF : AC
QTG70L-BZ : AC
QTG70LF-BZ : DC
QTG70LF-BZ : AC
Ø70
Ø70
Ø70
13.5
13.5
13.5
50
50
50
L1
L2
L3
50
85
123
12
12.5
12
12.5
12
12.5
BUZZER VOLUME
CONTROL LEVER
LAYER
1
2
3
4
5
L1
126
176
226
276
326
L2
161
211
261
311
361
L3
199
249
299
349
399
Ø14 CABLE ENTRY
PCD 50
360˚/3-M4 BOLT
Ø70
Ø70
Ø70
13.5
13.5
13.550
50
50
L1
6228.5120
Ø24
M24Ⱌ1.5 THREADM24Ⱌ1.5 THREADM24Ⱌ1.5 THREAD
Ø24
L2
L3
97
135
28.5120
28.5120
Ø24
BUZZER VOLUME
CONTROL LEVER
QTG50ML : DC
QTG50MLF : DC
QTG50ML-BZ : DC
QTG50ML : AC
QTG50MLF-BZ : DC
QTG50MLF : AC
QTG50ML-BZ : AC
QTG50MLF-BZ : AC
QTG50L : DC
QTG50LF : DC
QTG50L-BZ : DC
QTG50L : AC
QTG50LF-BZ : DC
QTG50LF : AC
QTG50L-BZ : AC
QTG50LF-BZ : AC
LAYER
1
2
3
4
5
L1
116
156
196
236
276
L2
158
198
238
278
318
L3
204
244
284
324
364
LAYER
1
2
3
4
5
L1
344
384
424
464
504
L2
386
426
466
506
546
L3
432
472
512
552
592
Ø50
13.540
Ø50
13.540
Ø50
13.5
L112
50
92
12
12.5 12.5
L2
L3
L1
62
104
L2
L3
150200 28.5
200 28.5
200 28.5
40
138
12
12.5
BUZZER VOLUME
CONTROL LEVER
BUZZER VOLUME
CONTROL LEVER
Ø14 CABLE ENTRY
PCD 30
360˚/3-M4 BOLT
Ø50
13.540
Ø50
13.540
Ø50
Ø18 Ø18 Ø18
13.540
M18Ⱌ1.5 THREADM18Ⱌ1.5 THREADM18Ⱌ1.5 THREAD
LAYER
1
2
3
4
5
L2
309
359
409
459
509
L3
347
397
447
497
547
L1
274
324
374
424
474
• QTG50(M)L
• QTG60(M)L
• QTG70(M)L
Dimensions
(Units : mm)

4 5




















Wiring diagrams Wiring diagrams
DC Steady
• QTG(A) ☐☐
(M)L
- Refer to this diagram for
buzzer type product
• QTG
☐☐
L
Lens diameter
50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
AC Steady
• QTG(A) ☐☐
(M)L - Refer to this diagram for
buzzer type product
• QTG
☐☐
L
Lens diameter
50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L
QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L
DC Steady/Flashing
• QTG(A)
☐☐
(
M)LF - Refer to this diagram for
buzzer type product
• QTG
☐☐
LF
Lens diameter
50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF
70(70mm) : QTG70(M)LF
AC Steady/Flashing
• QTG(A)
☐☐
(
M)LF - Refer to this diagram for
buzzer type product
• QTG
☐☐
LF
Lens diameter
50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF
70(70mm) : QTG70(M)LF
QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF
QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF
• In case of wiring with external contacts, refer to the wiring diagrams below according to your product’s type and voltage setting.
•DC steady type cable specication: External power/ signal line - UL1007 AWG22(0.3sq) 400mm
• AC steady, AC/DC steady/ashing type cable specication : External power line - UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line - UL1007 AWG22(0.3sq) 400mm
■
Wiring using external contact
Wiring Instructions
Red
Amber
Green
Blue
White
Brown
Black
Red
Amber
Green
Blue
White
Brown
Black
White
Black
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
External contact External contact
Power
Fuse Fuse
Steady Steady
Power
Red
Amber
Green
Blue
White
Brown
Black
White
Black
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
External contact External contact
Fuse Fuse
Steady
Steady
Flash
Power Power
Common Common
Common Common
Flash
Red
Amber
Green
Blue
White
Brown
Black
Gray
White
Black

4 5
NPN-Transistor
1
2
3
4
5
PNP-Transistor
1
2
3
4
5
PNP-Transistor
1
2
3
4
5
Flash
PNP-Transistor
1
2
3
4
5
•DC steady type cable specication: External power/ signal line - UL1007 AWG22(0.3sq) 400mm
• AC steady, AC/DC steady/ashing type cable specication : External power line - UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line - UL1007 AWG22(0.3sq) 400mm
• When using a transistor, please choose between the NPN or PNP type transistor which best matches the voltage and product type,
then connect them correctly according to the wiring diagrams below.
■
Wiring using transistor
Wiring diagrams
DC Steady
• QTG(A)
☐☐
(M)L - Refer to this diagram for buzzer type product
• QTG
☐☐
L
Lens diameter
50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L
DC Steady/Flashing
• QTG(A)
☐☐
(
M)LF - Refer to this diagram for
buzzer type product
• QTG
☐☐
LF
Lens diameter
50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF
70(70mm) : QTG70(M)LF
AC Steady/Flashing
• QTG(A)
☐☐
(
M)LF - Refer to this diagram for
buzzer type product
• QTG
☐☐
LF
Lens diameter
50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF
70(70mm) : QTG70(M)LF
QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF
QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF
Red
Amber
Green
Blue
White
Brown
Black
Red
Amber
Green
Blue
White
Brown
Black
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
External Transistor-NPN External Transistor-PNP
Fuse Fuse
Steady Steady
Power Power
Red
Amber
Green
Blue
White
Brown
Black
White
Black
Red
Amber
Green
Blue
White
Brown
Gray
Black
White
Black
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
External Transistor-PNP External Transistor-PNP
Fuse Fuse
Steady Steady
Power Power
Flash Flash
Common Common
Common Common

6 7
Parts Denition
Cover(ABS)
Housing(ABS)
Sound volume lever
Pipe(AL)
Lens(PC)
Installation Environment and Protection Rating
• This product is designed for indoor use with protection rating of IP65(standard type) and IP54(buzzer type).
•
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP65),
it may cause malfunction or damage to the product.
•For further information, please visit our website (http://www.qlight.com).
How to Change Lens Kit
• Disassembling lens kits
①
Twist the upper lens kit in a
counter-wise direction so the
“I” mark from both kits align.
②
Disassemble by removing the
upper lens kit from the lower
one.
• Assembling lens kits
①
Put the two lens kits together
by aligning the upper lens’ “I”
mark and the lower lens’ “I”
mark together.
②
Lock the two kits by twisting the
upper lens kit in a counter - wise
direction so the upper lens’ “
◁
”
mark aligns with the lower lens’
“I” mark.
Lens modules are connected through
cone-shaped contact point. In case
the contact point is damaged, it may
cause a contact failure.
※Cautions
Contact
Point

6 7
Buzzer Sound Volume Adjustment Instructions Mounting Hole Specications
PCD 40
PCD 30
3-Ø5 HOLES
Ø14 HOLES
3-Ø5 HOLES
Ø14 HOLES
3-Ø5 HOLES
Ø14 HOLES
PCD 50
①Machine holes on the mounting surface referring to the
diagram below.
② First, remove the ange nuts from bolts and place the product
through the mounting surface holes.
③ F asten the ange nuts on the opposite side of the mounting
surface until the product is tightened securely.
■
QTG50M/ QTG60M/ QTG70M - Direct Mounting Type Model
Buzzer volume is reduced by sliding
the volume control lever to the left
as show in the diagram to the left.
( Min. 65±4dB/m )
Raise/ Increase the buzzer volume
by sliding the control lever to the
right as shown in the diagram to
the left.
( Max. 85±4dB/m )
Dimensions
QTG50 series
QTG60 series
TWS45 TWA45
QTG70 series
TWS80 TWA80
Mounting Accessories (Sold Separately)
13
50
84
50
20
44
86
12
35
60
40
20
4-Ø5 HOLES
Ø12
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
36
66
25
66
PCD40
50
84
50
36
PCD40~50
35
60
40
12
36
66
10
6
PCD30~40
PCD30~40
4-Ø5 HOLES
360°/3-
Ø5 HOLES
4-Ø5 HOLES
360°/3-
Ø5 HOLES
PCD40~50
4-Ø5 HOLES
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
Ø12
13
50
84
50
20
44
86
12
35
60
40
20
4-Ø5 HOLES
Ø12
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
36
66
25
66
PCD40
50
84
50
36
PCD40~50
35
60
40
12
36
66
10
6
PCD30~40
PCD30~40
4-Ø5 HOLES
360°/3-
Ø5 HOLES
4-Ø5 HOLES
360°/3-
Ø5 HOLES
PCD40~50
4-Ø5 HOLES
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
Ø12
•Please refer to the dimensions below for installation of mounting brackets.
■
QTG50ML/ QTG60ML/ QTG70ML - Direct Mounting Type Model
QTG50M
QTG70M
QTG60M
• Buzzer type model with 2 different sounds of long beeping
sound and short beeping sound is available upon request.
■ 2 Sound Buzzer Type

8 9
Dimensions
QTG50 series
QTG60 series
18mm SCREW & NUT LB18
LW18 SZ18
QZ18 SL18
QL18 QLA18
■
QTG50L/ QTG60L - Pole Mounting Type Model
Ø18
Ø18
32
34 24
Ø70
51
M18x1.5
THREAD
75
52
69
Ø18
Ø18
66
52
38
34
46
50
58
Ø28
1/2" PF
4-Ø5 HOLES
12x22
CABLE ENTRY
Ø70
50
Ø18
4-Ø5 HOLES
PCD 56
60 57
4-Ø5.5 HOLES
Ø19 CABLE ENTRY
Ø18
Ø90
PCD 73
4-Ø5.5 HOLES
2-Ø8.5 HOLES
PCD 54~56
Ø90
Ø18
4-Ø6 HOLES
45.5 66
Ø11 CABLE ENTRY
PCD 73
Ø18
Ø70
51.5 67
4-Ø5.5 HOLES
Ø18 CABLE ENTRY
PCD 54~56

8 9
Dimensions
QTG70 series
24mm SCREW & NUT LB24
LW24 SZ24
QZ24 SL24
QL24 QLA24
■
QTG70L - Pole Mounting Type Model
46
70
81
32
34
46
M24x1.5
THREAD
2-Ø8.5 HOLES
69.5
52
38
34
46
50
70
1/2" PF
4-Ø5 HOLES
12x22 CABLE ENTRY
33
Ø24
Ø70
55
4-Ø5.5 HOLES
PCD 54~56
Ø24
4-Ø5 HOLES
Ø90
55.5
PCD 73
Ø24
Ø35
Ø24
Ø24
60 57
Ø90
Ø19 CABLE ENTRY
PCD 73
Ø24
4-Ø5.5 HOLES
Ø90
4-Ø6 HOLES
45.5 66
Ø11 CABLE ENTRY
PCD 73
Ø24
Ø90
51.567
4-Ø5.5 HOLES
Ø18 CABLE ENTRY
PCD 71~73
Ø24
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
EN-1807A
Microlectra bv.
Augustapolder 12. 2992 SR Barendrecht. The Netherlands.
www.microlectra.nl [e-mail]