Qlight SEBA User manual
1
55
6040
95
dB
Explosion Proof Warning Light/ Signal Light and Alarm Bell
SEBA/ SEBAS/ SEBAL/ SEBALR
SEBA
-
220
-
R
[Model number] [Voltage] [Color]
| | |
• SEBA
• SEBAS
• SEBAL
• SEBALR
• 24-DC24V
• 110-AC110V
• 220-AC220V
R-Red
A-Amber
G-Green
B-Blue
Ex
Ordering Specications
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Safety Precautions for Explosion Proof Products
’XULQJZLULQJRUPDLQWHQDQFHSOHDVHFRPSOHWHO\WXUQRWKHSRZHURIWKHSURGXFW)DLOXUHWRIROORZWKLVPD\OHDGWRDQHOHFWULFVKRFN
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
UDWLQJVLQGLFDWHGIRUHDFKSURGXFW)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\FDXVHD¿UHWRWKHSURGXFWHOHFWULFVKRFNSK\VLFDOLQMXU\
PDOIXQFWLRQRUGDPDJHWRWKHSURGXFW
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point.
)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\OHDGWR¿UHHOHFWULFVKRFNRUSURGXFWGDPDJH
3OHDVHDSSO\WKHFRUUHFWYROWDJHWRWKHSURGXFW)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\OHDGWR¿UHHOHFWULFVKRFNRUSURGXFWGDPDJH
5.
When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device.
)DLOXUHWRIROORZWKLVPD\FDXVHGDPDJHWRSURSHUW\¿UHHOHFWULFVKRFNDQGORVVRIOLIH
Precaution for Safety
)DLOXUHWRIROORZWKHLQVWUXFWLRQVEHORZPD\FDXVHDORVVRIOLIHRUVHULRXVSK\VLFDOLQMXU\
Please follow the instruction below to ensure safe and correct use of explosion proof products.
1. Explosion proof products should be managed according to explosion-proof regulations. Do not disassemble, assemble, alter or repair
the product arbitrarily.
2.
The temperature rating of the product is the temperature the product will experience at the applied rated voltage and ambient
temperature indicated.
3. Use cable glands that satisfy the product’s explosion proof grade and temperature grade.
8QXVHGFDEOHHQWULHVPXVWEH¿OOHGZLWKPDWHULDOWKDWPHHWVWKHH[SORVLRQSURRIJUDGHDQGWHPSHUDWXUHUDWLQJ
5. Before installing the product, please make sure all cautions indicated on the labels, packaging, and operation manual of the product are
fully understood.
,QVWDOODWLRQPDLQWHQDQFHDQGUHSDLURIWKHSURGXFWPXVWEHSHUIRUPHGE\H[SHUWVLQWKHH[SORVLRQSURRI¿HOGRUSHUVRQVZKRKDYH
received relevant training.
)RUVDIHW\WKHSURGXFWVKRXOGEHLQVWDOOHGDQGRSHUDWHGLQHQYLURQPHQWVWKDWDYRLGKLJKWHPSHUDWXUHDQGKLJKSUHVVXUH
8. Please follow general safety precautions and avoid installing the product in locations that may generate excessive heat.
9. When installing the product in places where chemicals are located, please make sure that the environment does not have two or more
LQFRPSDWLEOHFKHPLFDOVPL[HG)RUVDIHW\SOHDVHUHDGWKHLQVWUXFWLRQPDQXDOFDUHIXOO\DQGEHPLQGIXORIWKHFKHPLFDOFRPSRVLWLRQV
where the product is used.
10. This product requires grounding.
1. Please remove any objects that can interrupt ventilation around the product.
3OHDVHWXUQRWKHSRZHURIWKHSURGXFWLPPHGLDWHO\LILWIDLOVWRRSHUDWHSURSHUO\
&DUHIXOO\ZLUHWKHSURGXFWDFFRUGLQJWRHDFKSURGXFW¶VVSHFL¿FDWLRQ
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
)DLOXUHWRIROORZDQ\RIWKHLQVWUXFWLRQVDERYHPD\FDXVHPDOIXQFWLRQRUGDPDJHWRWKHSURGXFW¿UHDQGHOHFWULFVKRFN
Precautions for Correct Use
)DLOXUHWRIROORZWKHSURSHULQVWUXFWLRQVPD\FDXVHGDPDJHWRSURSHUW\WKHSURGXFWRUPDOIXQFWLRQRIWKHSURGXFW
that would void the warranty.
Please scan the QR code for more
detailed product information.
www.qlight.com
2
Model number
SEBA
SEBAS
SEBAL
SEBALR
Range of
operating voltage
DC24V
AC 110V or 220V
Ex mark
Ex d II C T6
Ambient operating
temperature
–&7D&
Explosion proof
Zone
Zone1, Zone2
Protection rating
IP55
Model number Voltage Current
%XOEVSHFL¿FDWLRQV Volume
&HUWL¿FDWHV
Weight Color
Volts/Watts
&RQ¿JXUDWLRQ
Part#
SEBA
DC24V 0.811A 24V15W G23 15S 18
Max.95dB
7.37kg
R-Red
A-Amber
G-Green
B-Blue
AC110V 0.291A 12V15W G23 15S 17 8.06kg
AC220V 0.145A 12V15W G23 15S 17
SEBAS
DC24V 0.666A 200V
~550V
EUB0641
$*
U type
48 -
7.24kg
AC110V 0.222A 7.67kg
AC220V 0.150A
Model number Voltage Current
Volume
&HUWL¿FDWHV Weight Color
SEBAL
DC24V 0.213A
Max.95dB
-
7.25kg
R-Red
A-Amber
G-Green
B-Blue
AC110V 0.131A 7.99kg
AC220V 0.065 A
SEBALR
DC24V 0.172A 7.20kg
AC110V 0.122A 7.92kg
AC220V 0.061A
SEBA/ SEBAS/ SEBAL/ SEBALR
150
134
134
150
333
13410 189
CABLE ENTRY 1/2'' NPT
240
Ø150
Ø167
4-Ø8.5
FITTING HOLES
Product Specications
■
Explosion Proof Specications
■
General Product Specications
Zone
GH¿QLWLRQV*DV
Zone 1
High risk gas/vapour*DV
Zone 2
Medium risk gas/vapour*DV
Group
GH¿QLWLRQV*DV
GROUP II A
Acetone, Petrol, Methanol, Propane, Toluene
GROUP II B
Ethylene, City gas
GROUP II C
Hydrogen, Acetylene, Carbon sulphide
Maximum surface
temperature of
electrical equipment
T1
450
°C
T2
300°C
T3
200°C
Zone
GH¿QLWLRQV’XVW
T4
135
°C
T5
100
°C
Group
GH¿QLWLRQV’XVW
T6
85
°C
Zone 21
High risk powder/dust’XVW
Zone 22
Medium risk powder/dust’XVW
Group
GH¿QLWLRQV’XVW
GROUP II A
,JQLWLEOH¿EHUV\LQJVPRUHWKDQPP
GROUP II B
Non-conductive dusts
GROUP II C
Conductive dusts
Dimensions
8QLWVPP
3
①
)LUVWPDFKLQHWDSVRUKROHVRQWKHPRXQWLQJVXUIDFH
①.
• The mounting hole of this product is 8.5mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
■ Installation
Protection cage
676/
/HQV7HPSHUHGJODVV
+RXVLQJ$O
%HOO$O
•• Please refer to the chart below to use light function
selection switch located inside the product.
• Default function is set at steady LED. Select the desired function
for your application during installation.
4-Ø9 HOLES
134
134
• Please use an M4 bolt at the location marked
in the diagram above to ground the product.
•
When connecting the grounding cable,
please use a ring terminal.
•
Please use a grounding cable with a diam-
eter greater than 4mm.
Terminal Box Wiring Instructions
• Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper body to
get rid of the upper lighting element of the unit.
3OHDVHDSSO\IRUN8W\SHRUULQJ2W\SHORFNLQJVSDGHWHUPLQDODWQDNHGWLSRIWKHZLUHIRU
secure connection.
• Please wire the power line to terminal ①.
)RU$&W\SHSURGXFWVZLUHUHJDUGOHVVRISRODULW\
)RU’&W\SHSURGXFWVZLUHWHUPLQDORIEODFNOLQHWRSRODULW\
• Once the unit is powered on, light and bell are working simultaneously.
Parts Denition/ Installation/ Light Function Selection
▶LF :
)ODVKLQJ
v Light Function Selection(SEBAL only)
▶L :
Steady
■ Parts Denition
Grounding InstructionsMounting Hole Specications
• Machine holes on the mounting surface referring to
the diagram below.
M4 ground contact part
①
4
Bulb/ Xenon Bulb Replacement Instructions
①
②
①
②
3OHDVHZDLWDWOHDVWPLQXWHVDIWHUWXUQLQJRWKHSRZHUEHIRUH
replacing the xenon bulb.
• Please pull out the entire xenon bulb structure
①
to disassemble
while pushing the hook down.
)RU[HQRQEXOEDVVHPEO\SOHDVHSXVKGRZQWKHFRQQHFWRU
portion of the xenon bulb structure to the connector pin
location
②
until it makes “clark” sound.
• Please wait at least 1PLQXWHDIWHUWXUQLQJRWKHSRZHU
before replacing the bulb.
• In order to dissemble the bulb, please push down the bulb ①
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb ①
LQWKHVRFNHW
②DQGVFUHZLWFORFNZLVHZKLOHOLJKWO\SXVKLQJ
down the bulb.
Assemble bulb
Disassemble bulb
Assemble
bulb Disassemble
bulb
■ Xenon Bulb Replacement Instructions(SEBAS only)
v
Bulb Replacement Instructions(SEBA only)
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
3OHDVHPDNHVXUHWRXVHWKHSURGXFWLQDQHQYLURQPHQWWKDWPHHWVWKHVSHFL¿HGH[SORVLRQSURRIUDWLQJDQGUHJXODWLRQV
)RUIXUWKHULQIRUPDWLRQSOHDVHYLVLWRXUZHEVLWHZZZTOLJKWFRP
Product installation direction
■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product.
ㆍELECTRONIC SOUNDER/SIGNAL HORN
Sounder part shall not be facing the sky.
Sounder part shall not be facing the sky.
ㆍBEACON/SIGNALING LIGHT
Power cord inlet part shall not be facing the sky.
Power cord inlet part shall not be facing the sky.
ㆍSIGNAL TOWER LIGHTS
ㆍ+($9<’87<(;3/26,213522)6,*1$/,1*6
※)RUSURGXFWVZLWKDSURWHFWLRQUDWLQJRIOHVVWKDQ,3;SOHDVHLQVWDOOLWYHUWLFDOO\
※)RUSURGXFWVZLWKDSURWHFWLRQUDWLQJRIOHVVWKDQ,3;SOHDVHLQVWDOOLWYHUWLFDOO\
MEMO
MEMO
+HDG2FH_6XLWH67;97RZHU*DVDQGLJLWDOUR*HXPFKHRQJX6HRXO.RUHD
7HO7ROOIUHH)D[
)DFWRU\_0XNEDQJUR6DQJGRQJP\HRQ*LPKDHVL*\HRQJVDQJQDPGR.RUHD7HO7ROOIUHH
Qlight OverSEAs Sales Dept |
1DNGRQJGDHUR6DVDQJJX%XVDQ.RUHD(RPJXQJ’RQJ7HO
4OLJKW3XEOLF5HODWLRQV0DUNHWLQJ7HDP2FH_1DNGRQJGDHUR6DVDQJJX%XVDQ.RUHD(RPJXQJ’RQJ7HO
1RUWK)LUVW6WUHHW6XLWH6DQ-RVH&$86$7HO)D[
&KLQD)DFWRU\6KDQJKDL6DOHV2FH_1DQGD5RDG%DRVKDQ$UHD6KDQJKDL&KLQD7HO
-
21
-
6651
-
)D[
-
21
-
6315
-
3929
&KLQD)DFWRU\6LWH4LGRQJ_+DL\DQ5RDG4LGRQJ+LJKWHFK,QGXVWULDO’HYHORSPHQW=RQH4LGRQJ-LDQJVX3URYLQFH&KLQD
Tel +86
-
513
-
8384
-
)D[
-
513
-
8384
-
9910
Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※$//352’8&7352’8&763(&,),&$7,216$1’’$7$$5(68%-(&772&+$1*(:,7+287127,&(72,03529(
5(/,$%,/,7<)81&7,2125’(6,*12527+(5:,6(
+HDGRIILFH6XLWH67;97RZHU*DVDQGLJLWDOUR*HXPFKHRQJX6HRXO.RUHD Postal Code
)DFWRU\0XNEDQJ5R6DQJGRQJ0\HRQ*LPKDH6L*\HRQJVDQJQDP’R.RUHD Postal Code
For your safety
6SHFL¿FDWLRQDQGGLPHQVLRQVOLVWHGLQWKLVFDWDORJXHVXEMHFWWRFKDQJHZLWKRXWQRWLFHIRUSURGXFWTXDOLW\LPSURYHPHQW
7KHQHZHVWSURGXFWLQIRUPDWLRQLVDYDLODEOHRQRXUZHEVLWHZZZTOLJKWFRP
3OHDVHUHDGWKHLQVWUXFWLRQPDQXDODWWDFKHGWRWKHSURGXFWFDUHIXOO\EHIRUHLQVWDOODWLRQDQGXVH
www.qlight.com
EN - SEBA - 2206A
This manual suits for next models
3
Table of contents
Other Qlight Lighting Equipment manuals
Qlight
Qlight SESA User manual
Qlight
Qlight ST45ML-Ex User manual
Qlight
Qlight S100R User manual
Qlight
Qlight Microlectra QTG50 User manual
Qlight
Qlight SWTCL User manual
Qlight
Qlight S80S User manual
Qlight
Qlight S100M User manual
Qlight
Qlight MTG60 Series User manual
Qlight
Qlight S80S User manual
Qlight
Qlight ST45ML-Ex User manual
Qlight
Qlight S80L User manual
Qlight
Qlight ST45ML-NEC User manual
Qlight
Qlight STDL User manual
Qlight
Qlight SAMP User manual
Qlight
Qlight QMCL60 User manual
Qlight
Qlight QT50L-USB-BZ User manual
Qlight
Qlight QEAL1 User manual
Qlight
Qlight SMCL80 User manual
Qlight
Qlight SSEL Series User manual
Qlight
Qlight QWHL150 User manual
Popular Lighting Equipment manuals by other brands
Solid Apollo
Solid Apollo NeonArch 24V 90W product manual
LEGRAND
LEGRAND CONNECTRAC installation guide
Gira
Gira 2361 00 operating instructions
Showlite
Showlite HBL COB Series installation guide
Conrad
Conrad 2377686 operating instructions
Vision & Control
Vision & Control A-DIF-60x90-G525-SL Instructions for use
