Qlight S150R User manual

44
90dB
5020
1
Bulb Revolving Warning Light
S150R(FT)/ S150U(FT)
S150R - BZ - 220 - R
[Model
number] [Buzzer] [Voltage] [Color]
| | | |
• S150R
• S150R-FT
• S150U
• S150U-FT
• (Blank)
- No buzzer type
• BZ
-Built-in buzzer
type
• 12 - DC12V
• 24 - DC24V
• 110 -AC110V
• 220 -AC220V
R-Red
A-Amber
G-Green
B-Blue
• Protection rating : IP44
• Ambient operating temperature : -20°C to +50°C
Model
number
Voltage Current
Bulb specications
Certicate Weight Color
Volts/
Watts
Standard
Part#
S150R
S150R-FT
DC12V 1.545A 12V15W
G23 15S
17
0.85kg
R-Red
A-Amber
G-Green
B-Blue
DC24V 0.766A 24V15W 18
AC110V 0.204A 12V15W 17
1.24kg
AC220V 0.102A 12V15W 17
S150U
S150U-FT
DC12V 1.545A 12V15W 17
0.65kg
DC24V 0.766A 24V15W 18
AC110V 0.204A 12V15W 17
1.04kg
AC220V 0.102A 12V15W 17
Please scan the QR code for more
detailed product information.
www.qlight.com
※ Model number S150R(-FT) does not support built-in
buzzer option.
※CE compliant : DC12V/24V
Ordering Specications
Thank you for purchasing Qlight’s products. Please read this
user manual carefully prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o󰀨 the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specication.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. During wiring or maintenance, please completely turn o󰀨 the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, re, electric shock and loss of life.)
Product Specications

2
S150R S150R-FT
122
189
60
15
Ø140
PCD 96
360˚/3-
M5 BOLT
Ø10
CABLE ENTRY
Ø140
12
194
12260
PCD 155
360˚/3-Ø8
FITTING HOLES
Ø10
CABLE ENTR
Y
S150U S150U-FT
126
193
67
15
Ø138
PCD 96
360˚/3-
M5 BOLT
Ø10
CABLE ENTRY
Ø138
8
196
12662
PCD 155
360˚/3-Ø8
FITTING HOLES
Ø10
CABLE ENTRY
• External power line -UL1015 AWG18(0.75sq) × 2C 400mm
• For built-in buzzer type, there is a shared supply line for the buzzer and lighting element(S150U, S150U-FT only).
Red
Black Power Power
Fuse
DC
White
Black Fuse
AC
Wiring Instructions
Dimensions
(Units : mm)

3
Min. Ø5 CABLE ENTRY
3- Ø6 HOLES
3-Ø9 HOLES
Min. Ø5 CABLE ENTRY
PCD 155
PCD 96
S150R/ S150U S150R-FT/ S150U-FT
Parts Denition/ Installation
Mounting Hole Specications
• Machine holes on the mounting surface referring to the diagram below.
Lens(PC)
Mounting bracket(STS)
Reector
(Heat resistant ABS)
Light bulb
■ Parts Denition
• First, remove the ange nuts from bolts and place
the product through the mounting surface holes.
• Fasten the ange nuts on the opposite side of the
mounting surface until the product is tightened securely.
■ Installation
S150R/ S150U S150R-FT/ S150U-FT
Housing(STS) S150R(FT)
Housing(ABS) S150U(FT)
Flange nut
Flat washer
Rubber spacer
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP44.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP44), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-
down positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (www.qlight.com).

Qlight Co., Ltd. www.qlight.com | [email protected]
Head O󰀩ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. [phone](Toll free. [phone]) Fax. [phone]
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. [phone](Toll free. [phone])
Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : [phone]
Qlight Public Relations & Marketing Team O󰀩ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. [phone]
Qlight USA, Inc. www.qlight.com www.qlightusa.com | [email protected]
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. [phone] Fax. [phone]
SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | [email protected]
China Factory/ Shanghai Sales O󰀩ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86 - 21 - 6651 - 7100 Fax. +86 - 21 - 6315 - 3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China
Tel +86 - 513 - 8384 - 9999 Fax +86 - 513 - 8384 - 9910
Product Operation Inquiry / Customer Support [phone]
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)
For your safety
Specication and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.
www.qlight.com
EN - S150R - 2106A