RainPoint ITV101P User manual

ITV101P
USER MANUAL
English Español
Email
se[e-mail]
WhatsApp
[phone]
Free Hotline
US: [phone] (EN)
EU: [phone] (EN DE)
Save the user manual for future reference
If you have any questions, please contact us to get suppo

WARM TIPS
PLEASE READ BEFORE USING
FOR ANY PROBLEMS DURING USE, PLEASE CONTACT US:
Web: www.rainpointonline.com
Email: se[e-mail]
WhatsApp: [phone]
US Free Hotline(English):
[phone](MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch):
[phone](MON-FRI 9:00 AM-5:00 PM CET )
Don’t use the water timer when the temperature is below
37℉(3℃), and please store the timer indoors to avoid
potential freezing damage.
The lter traps di paicles, preventing them from
entering the timer and causing clogging. Please clean
the lter regularly and replace it if worn.
To ensure a longer lifespan, please use 2 new AA
alkaline batteries (not included). Don’t mix new and old
alkaline, standard (carbon-zinc), or rechargeable batteries.
Only use with clean cold water.
Please activate the water timer before rst use or after a
period of inactivity
(Refer to page 6: ACTIVATE THE TIMER BEFORE USE).

PRODUCT OVERVIEW
At A GLANCE
- 01 -
FILTER
HOSE TAP
CONNECTION
OK/MANUAL
BUTTON
OUTLET
BIG LCD
SCREEN
+/DELAY
BUTTON
DIAL
DIAL
BUTTON FUNCTION
OK /MANUAL
BUTTON
+ /DELAY BUTTON
Rotate the dial to set your watering
schedule.
Use "OK" to conrm the time. When the dial is
turned to "ON", press and hold "MANUAL" to
water manually.
Use "+" to adjust the time. When the dial is
turned to "ON", press and hold "DELAY" to
activate Rain Delay.
- 01 -

Waterproof
Min/Max Operating
Pressure
Max Flow Rate
Working Temperature
Power By
Thread
0.5bar-8bar (7.25 psi-116 psi)
10 Gal/Min (35L/Min)
37.4℉-122.4℉( 3℃-50℃ )
IP54
2 AA (1.5V) alkaline batteries (not included)
Watering Times
Per Day
1 to 3 times a day
(Up to 3 watering plans a day)
Watering Days Monday to Sunday OR Eve
2/3/4/5/6 days
NH(US) for 3/4" faucet / hose
BSP(EU) for 3/4" or 1" faucet / hose
SPECIFICATION
Watering Duration From 1 minute to 3 hours 59
minutes (4 hours)
Manual Watering Time
Rain Delay Time
1 minute to 8 hours, default 10 minutes
24h, 48h, 72h, default 24 hours
- 02 -

Eve _ Days
Next
Sta Time
P1/P2/P3
Low batte indicator
Flashing during watering
The selected day of the week
Inteal watering days
The time left to the next watering
The sta time of watering
Watering plans for one day
SET CLOCK
START TIME
HOW LONG
HOW OFTEN
VIEW SET
ON
Set your local current time
Set the sta watering time (Eve
watering plan has its own sta time)
Set watering duration from 1
minute to 3 hours 59 minutes.
(Eve watering plan has its own
watering duration)
Set watering frequency of the
week or eve few days
(3 watering plans share 1
watering frequency)
View all your settings of 3 plans
① Sta automatic watering
based on your programs.
② When the dial is in the ON
position, hold "+/DELAY"
button to enter delay mode.
OFF Turn o all watering programs
and shut o the valve.
DIAL POSITION FUNCTION
- 03 -
LCD ICON FUNCTION

PRODUCT INSTALLATION
INSTALLING THE BATTERIES
1. Remove the batte tray on the back of the timer.
2. Inse 2 new AA (1.5V) alkaline batteries (not included).
3. Put the batte tray back on the timer and press rmly to
make sure it is completely sealed.
BATTERY STATUS
Batte Status will be displayed as following:
Full Power Low Power
Note:
Note:
When the low batte indicator appears on display, the valve will close
automatically to avoid leakage. Please replace the batte in time in case of
interrupting the normal operation.
1. Install the batte tray securely after
installing the batte to ensure
waterproong.
2. When the timer is not used for a long
time, please remove the batteries and
dispose of them properly.
3. Replace batteries when the low batte
indicator appears on display. After
you done it, please remember to reset
your watering plans.
4. Don’t dispose of batteries in re.
Batteries may explode or leak.
5. To ensure a longer lifespan, please use
2 new AA alkaline batteries
(not included). Don’t mix new and old
alkaline, standard (carbon-zinc), or
rechargeable batteries.
- 04 -

INSTALLING THE TIMER
Inlet
Outlet
Tips: If the connection between the timer and the faucet or hose is
not tight or leaking, wrap more Teon Tape(thread seal tape) to make
them tight.
Note:
Please do not use tools, only install the timer by hand.
When expecting freezing temperatures, timers should be removed
from the hose faucet and stored indoors to avoid potential freeze
damage.
Please install the lter properly and keep it clean as follows.
1) Turn o the garden faucet.
2) Wrap Teon Tape around the faucet
threads.
3) Screw the timer to the garden faucet
and make the display as veical as
possible to the ground to prevent
rainwater from accumulating and
leaking into the interior.
4) Wrap Teon Tape around the threads
of the timer outlet.
5) Screw the garden hose to the timer
outlet.
6) Turn on the faucet after programming
the timer.
- 05 -

Please activate the device before using it for the rst time or after a
period of inactivity.
ACTIVATE THE TIMER BEFORE USE
Activation Steps：
1. Keep the garden faucet turned o.
2. Turn the timer dial to "ON".
3. Press and hold the "MANUAL" button for 3-5s to enter Manual
Watering Mode.
4. When the screen is ashing, press the "OK" button twice, and the
screen will stop ashing.
5. Wait about 5 seconds or until you hear a "click" and the valve in the
timer opens, then turn the dial to "OFF" to close the valve.
6. Repeat the step 2-5 for 3-5 times.
7. Test: Turn on the faucet a little bit, and then repeat the step 2-5 to
check if the water ow out or shut o as expected.
If yes, the timer valve is normal, please use it with condence!
If not, please repeat the above steps several times or contact
RAINPOINT suppo team immediately.
Note:
When testing, please keep away from the water timer outlet to avoid
being splashed and wet.
- 06 -

PROGRAMMING YOUR TIMER
SET CLOCKSTEP 1:
Tips:
1. Press and hold the "+" button can increase the time quickly.
2. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
1. Turn dial to "SET CLOCK".
2. " " ashing: Use the "+" button to select the day of the week,
then press "OK" to conrm.
3. " " ashing: Use the "+" button to set hour and press "OK" to
conrm.Press and hold the "OK" button to switch the time display in
12-hour or 24-hour mode.
·12-hour mode: with "AM" or "PM"
·24-hour mode: without "AM" or "PM"
4. " " ashing: Use the "+" button to set minute and press "OK" to
conrm.
5. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
- 07 -

1. Turn dial to "START TIME".
2. Use the "+" button to set the sta time and press the "OK" button
to conrm.(If you choose 12-hour mode, please note AM and PM)
3. After conrming this plan, press the "OK" button again to switch to the
next plan.
4. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips:
1. Press and hold the "+" button can increase the time quickly.
2. If you want to turn o a ceain plan, please adjust the sta time
to "23 : xx" (24-hour mode) or "11 : xx" PM (12-hour mode) when
setting the plan. Then press the "+" button again, and "OFF" will
appear on the screen, indicating that the plan has been closed.
3. If you want to cancel the "OFF" plan, press the "+" button again on
the plan to set its sta time.
4. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
START TIMESTEP 2:
- 08 -

HOW LONG
STEP 3:
1. Turn dial to "HOW LONG". ( will display on the screen.)
2. Use the "+" button to set the watering duration and press the
"OK" button to conrm.(The watering duration is from 1 minute to
3 hours 59 minutes)
3. After conrming this plan, press the "OK" button again to switch
to the next plan.
4. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips:
1. Press and hold the "+" button can increase the time quickly.
2. If you want to turn o a ceain plan, please adjust the watering
duration to "00 H 00 M" when setting the plan, and "OFF" will
appear on the screen, indicating that the plan has been closed.
3. If you want to cancel the "OFF" plan, press the "+" button again
on the plan to set its watering duration.
4. When the setup of this STEP is nished, please turn the dial to
save the changes instead of press the "OK" button. If you press
the "OK" button after setting, it will return to the previous setting
instead of saving it.
- 09 -

HOW OFTEN
STEP 4:
1. Turn the dial to "HOW OFTEN".
2. There are 2 setting modes for watering frequency.
a. Day of the Week Mode
b. Eve 2/3/4/5/6 Days Mode
(Watering plans will run eve Sunday, Wednesday, Thursday, and Friday)
(Watering plans will run eve 2 days)
Examples of watering frequency of eve 2 day, eve 3 days and
eve 5 days：
EVERY 2 DAY
EVERY
WEEK
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
WEEK
ONE
WEEK
ONE
WEEK
TWO
WEEK
TWO
EVERY 3 DAY
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
EVERY 5 DAY
- 10 -

3. Set the Day of the Week Mode
a. Use the "+" button to select the day of the week,
press "OK" to conrm.
b. means the "Sunday" has been selected. Press "OK" again can
cancel the selection.
c. Turn the dial clockwise to save the changes in this STEP and go
to next STEP.
4. Set the Eve 2/3/4/5/6 Days Mode
a. Use the "+" button to select "Int", press "OK" to conrm, then you
will enter the Eve 2/3/4/5/6 Days Mode.
b. Use the"+" button to select water eve 2/3/4/5/6 days, press
"OK" to conrm.
c. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips:
1. How to return to the Day of the Week Mode?
a. On the Eve 2/3/4/5/6 Days Mode, press the "OK" button twice.
b. Then the "day of the week" will reappear and ash, and the below
"Eve" will disappear.
2. How to set the water timer to water eve day?
If you want to run the watering plans eve day, please select eve
day from Monday to Sunday in the Day of the Week Mode.
(Watering plans will run eve day)
3. You can only choose one of the two watering frequency modes.
Once one of the two is conrmed, the other will be eliminated.
4. The 3 watering plans will use the same watering frequency.
5. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
- 11 -

STEP 6:
1) Turn the dial to "ON".
(All watering plans being set will run automatically)
2) During watering:
a. Display the remaining watering time and will ash.
b. Press the "+" button, and then the current day and time will be
displayed.
VIEW SETSTEP 5:
(The start time of P1) (The watering duration of P1) (Watering frequency)
1. Turn the dial to "VIEW SET".
2. Press "OK" button to check the START TIME, HOW LONG and HOW
OFTEN settings of the 3 watering plans.
ATUO WATERING
Remaining watering time Current time
- 12 -

There is no watering plans being set, which means the sta time or
watering duration of all 3 watering plans are truned o.
To turn o a ceain plan, please turn o the sta time or watering
duration of that plan.
(About how to turn o the sta time or watering duration, please refer to
the section [STEP 2: START TIME] and [STEP 3: HOW LONG] of Chapter
[PROGRAMMING YOUR TIMER])
3) When not watering:
a. If there is no watering plans being set, it will only display the current
day and time.
b. If there are plans being set but not running yet, it will display the
current day and time, and followed by how much time is left to the
next watering plan.
Current time How long until the
next watering stas
- 13 -

ADDITIONAL FEATURES
MANUAL / HAND WATERING
This feature allows you to water without
interrupting your set watering schedule.
Please follow the steps below to sta
manual watering.
1. Turn the dial to "ON".
2. Press and hold the "MANUAL" button for 3-5s to enter the Manual
Watering Mode.
3. Press the "+" buttons to adjust the hours from 0 to 8, press "OK"
button to conrm.
4. Press the "+" buttons to adjust the minutes from 0 to 59.
5. Press the "OK" button to conrm and the screen stops ashing, then
the timer valve will open and sta manual watering after 5 seconds.
If you want to reset it, please press the "OK" button again within the 5
seconds and the "hour" will be ashing again, then you can reset the
manual watering time.
Tips: How to stop the manual watering ?
· Method 1: Press and hold the "MANUAL" button for 3-5s to exit the
manual watering and restore the original watering program.
· Method 2: Turn the dial to "OFF" to stop. And please remember to
turn the dial to "ON" again to restore the original watering program.
- 14 -

OFF MODE
PRODUCT FEATURES
RAIN DELAY WATERING
Rain delay allows you to postpone watering for a set period of time,
and it will not interrupt your original schedule.
To access the rain delay, follow the steps below.
Rain delay time Current time
1. Turn the dial to "ON".
2. Press and hold the "DELAY" button for 3-5s to sta the delay
watering function.
3. Press the "+" button to select delay time from 24H, 48H, and
72H(default 24 hours).
4. Press the "OK" button to run the delay function after selecting the
delay time, and all watering plans will be skipped during this period.
5. To remove rain delay, please trun the dial to "ON" and hold the
"DELAY" button for 3-5s again to resume your programmed watering
schedule.
Note:
Please remember to press the "OK" button after selecting the rain delay
time to sta the rain delay program. Otherwise, the rain delay setting
will automatically exit after the screen ashes for 3-5s
1. If you wish to stop all 3 watering plans
for an extended period, turn the dial to
"OFF". (Your settings will be saved)
2. The timer will not run automatically
while in OFF mode. (The screen will
display OFF )
3. To sta watering again, turn the dial
back to "ON" to resume your
programmed watering schedule.
- 15 -

The water inlet
leakage
Problem Possible Cause Possible Solution
TROUBLESHOOTING
1. No lter or not be
placed horizontally
2. The faucet is not
the standard 3/4"
1. Long time in storage
and transpoation
make the valve
inactive
2. Valve blockage
1. Add a lter and make
sure it's placed
horizontally in the inlet.
2. Make sure the faucet is
a standard 3/4" faucet.
3. Wrap Teon tape on the
tap making it tight.
1. Keep the tap turned
o and turn the timer
dial to ON;
2. Run the manual
watering for 5-7s and
stop it;
3. Repeat the Step 2 for 3
to 5 times;
4. T using it normally.
1. Press OK button
again after the time
is set to conrm.
1. Use new alkaline
batteries.
2. Rechargeable batteries
and carbon batteries
have a sho life, use
the alkaline batteries
instead of them.
The water
won't stop/ow
out
No response
for manual/rain
delay function
1. After setting manual
watering or rain
delay time, without
pressing OK button
to save and run.
Sho batte
life
1. Mixed use of old
and new batteries
2. Use the carbon
batteries or
rechargeable
batteries
- 16 -

Low water
pressure
PROBLEM Possible Cause Possible Solution
1. Filter blockage
2. Inlet pressure not
sucient to
suppo
watering needs
1. The batte is
exhausted
2. The display is
exposed to direct
sunlight
1. Check if the lter is
clogged, if so, clean
or replace the lter.
2. Make sure the timer is
installed properly and
not cross-threaded.
3. Installation of a
booster pump or other
auxilia equipment of
increasing pressure
1. Replace new 2*AA
alkaline batteries and
installed correctly.
2. Avoid direct sunlight,
and obsee if the
batte is too low.
LCD screen
does not
display
If you need help in using the timer, please feel free to contact us.
US Free Hotline(English): [phone]
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch): [phone]
(MON-FRI 9:00 AM-5:00 PM CET )
Email: se[email protected]
WhatsApp: [phone]
- 17 -

CLEANING YOUR TIMER
3. Turn on the Manual Watering Mode of the timer to open the valve and
check whether the water pipe of the timer is blocked. If it is blocked,
please clean it gently with a small cleaning brush.
After a period of use, impurities or di in the water may accumulate in
the timer. Therefore, the timer should be cleaned regularly to ensure its
proper operation.
Please follow these steps to clean the timer.
1. Turn o the garden faucet and remove the timer. Check whether the
lter at the timer water inlet has accumulated impurities.
2. If the lter is diy, please take it out of the timer and rinse it with
running water.
filter
- 18 -