RainPoint ITV517 User manual

USER MANUAL
Save the user manual for future reference
If you have any questions, please contact us to get suppo
Multi-Programming
Digital Water Timer
Model: ITV517
Email
se[e-mail]
Website
www.rainpointonline.com
Free Hotline
US: [phone] (EN)
EU: [phone] (EN DE)
WhatsApp
[phone]

What in the box
A. ITV517P Multi-Programming Digital Water Timer
B. User Manual
C. Installation Guide
D. Teon Sealing Tape
A
B
C
D
- 001 -

IMPORTANT!
PLEASE READ!
PLEASE ACTIVATE THE VALVE BEFORE USE IF YOU ARE USING IT
FOR THE FIRST TIME OR AFTER A PERIOD OF IDLENESS TO
ENSURE YOU CAN USE IT PROPERLY: TURN TO DIAL TO ON, PRESS
AND HOLD OK BUTTON FOR 5S ENTER MANUAL MODE,THEN
RE-PRESS OK BUTTON TWICE TO ACTIVE AND CLOSE THE
VALVE,REPEAT THE ABOVE 3-5 TIMES.(EXPLANATION:IN MOST
CASES,THE VALVE IS ACTIVATED,BUT DUE TO EXTERNAL FORCES
OR THE ENVIRONMENT DURING STORAGE AND TRANSPORTATION
BY A VARIETY OF FACTORS,THE VALVE MAY APPEAR TO CLOSE ON
ITS OWN,THEN IT NEEDS TO BE ACTIVATED MANUALLY.)
ONLY USE WITH CLEAN COLD WATER.
FILTER TRAPS DIRT PARTICLES PROLONGING THE LIFE OF THE
PRODUCT.CLEAN FILTER REGULARLY AND REPLACE IF WORN.
WHEN EXPECTING FREEZING TEMPERATURES,TIMERS SHOULD BE
REMOVED FROM THE HOSE FAUCET AND STORED INDOORS TO
AVOID POTENTIAL FREEZE DAMAGE.
FOR ANY PROBLEMS DURING USE,PLEASE GET SUPPORT AS FOL-
LOWS:
WEB: www.rainpointonline.com
E-MAIL: se[e-mail]
US Free Hotline(English): [phone]
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch): [phone]
(MON-FRI 9:00 AM-5:00 PM CET)
- 002 -

PRODUCT OVERVIEW
BEFORE START
DIAL: Rotate to customize your watering schedule
OK/MANUAL Button: Conrm setup or water manually
DELAY/- Button: Adjust time and system setup or delay watering
program
+ Button: Adjust time and system setup
MENU Button: Switch functions in plan setting, and review the set
details at ON position
DIAL
FILTER
OUTLET
HOSE TAP
CONNECTION
BIG LCD
SCREEN
+ BUTTON
DELAY/-
BUTTON
MENU BUTTON
OK/MANUAL
BUTTON
- 003 -

SPECIFICATION
SET CLOCK
DIAL POSITION FUNCTION
Set the current time
Go to the Irrigation Plan I
settings
PLAN 1
Go to the Irrigation Plan 2
settings
PLAN 2
Go to the Irrigation Plan 3
settings
PLAN 3
Run the timer based on the
setting
Turn o the valve and all
schedules
ON
OFF
Min/Max Operating Pressure
Flow Rate
7-116󶀅PSI (0.5-8 Bar)
5.8󶀅Gal/min(22󶀅L/min)
Waterproof󶀅Rate IP54
Working󶀅Temperature 37.4℉—122℉ (3℃—50℃)
Watering󶀅Duration 1󶀅min󶀅to󶀅3󶀅hrs󶀅59󶀅mins
Watering󶀅Frequency
Thread
Power󶀅By 2 * AAA󶀅batteries(not󶀅included)
NH(US) for󶀅3/4"󶀅taps,
BSP(EU) for󶀅3/4"󶀅or󶀅1"󶀅taps
Eve󶀅6󶀅hrs󶀅to󶀅7󶀅days, or󶀅any󶀅day󶀅of󶀅
the󶀅week
- 004 -

PRODUCT INSTALLATION
INSTALLING THE BATTERY
1) Remove the batte tray on the back
of the timer.
2) Inse two new AAA (1.5V) alkaline
batteries (not included).
3) Firmly reinstall the batte tray back
into the timer.
· Firmly restore the batte tray to ensure water resistance.
· Removed old batteries at the end of the watering season and disposed
of properly.
· Used up or dead batteries must be removed from the timer and
disposed of properly.
· Do not dispose of batteries in the re. Batteries may explode or leak.
· Replace batteries when the low batte indicator appears on display.
Note:
- 005 -

1) Attach the timer to an outdoor hose
faucet.
2) Please turn on the tap after programming
the timer.
INSTALLING THE TIMER
· Please t to use it veically.
· When programming the timer please turn o tap to avoid getting wet.
· Do not use tools on the timer. Hand tightens only.
· Used up or dead batteries must be removed from the timer and
disposed of properly.
· Keep away from freezing. Timer should be removed to avoid freezing
damage.
· To prolonging the life of the timer, keep the lter clean and in place
when using the timer.
Note:
- 006 -

PRODUCT SETTINGS
STEP 1: SET CLOCK
1) Turn the dial to SET CLOCK.
2) Use the "+" and "-" buttons to set the weekday and time , press
"OK" button to save.
3) Long press the "+" and "-" buttons can be set quickly.
4) Default 24-hour system, long press "OK" button can switch between
12-hour system and 24-hour system.
5) Turn the dial to save changes.
- 007 -

STEP 2: PLAN 1/2/3
1) Turn the dial to PLAN 1/2/3 to set the schedule for each of them.
2) Use the "MENU" button to switch the setting of Sta Time, How
Long and How Often.
3) Use the "+" and "-" buttons to set the watering schedule. Press "OK"
button to conrm and save settings.
4) Long press "+" and "-" buttons can be set quickly.
5) Turn the dial to save changes after nishing all settings.
- 008 -

STEP 3: START TIME
1) Turn the dial to any plan, and it will sta setting from Sta Time.
Press the "+" and "-" buttons to set the hour while it's blinking, press
the "OK" button to conrm, and go to set minutes.
2) After the minute setting nishes, press "OK" to conrm, and eveth-
ing stops blinking, which means it is conrmed. At this time, ONLY
press the "+" and "-" buttons can resume settings.
- 009 -