RainPoint ITV201P User manual

USER MANUAL
Model No.ITV201P
DeutschEnglish
Email:
se[e-mail]
WhatsApp:
[phone]
Free Hotline
US: [phone] (EN)
EU: [phone] (EN DE)
Save the user manual for future reference
If you have any questions, please contact us to get suppo

WARM TIPS
PLEASE READ BEFORE USING
FOR ANY PROBLEMS DURING USE, PLEASE CONTACT US:
Web: www.rainpointonline.com
Email: se[e-mail]
WhatsApp: [phone]
US Free Hotline(English):
[phone](MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch):
[phone](MON-FRI 9:00 AM-5:00 PM CET )
Don’t use the water timer when the temperature is
below 37°F(3°C), and please store the timer indoors
to avoid potential freezing damage.
The lter traps di paicles, preventing them from
entering the timer and causing clogging. Please
clean the lter regularly and replace it if worn.
To ensure a longer lifespan, please use 2 new AAA
alkaline batteries (not included). Don’t mix new and
old alkaline, standard (carbon-zinc), or rechargeable
batteries.
Only use with clean cold water.
Please activate the water timer before rst use or
after a period of inactivity (Refer to page 6:
ACTIVATE THE TIMER BEFORE USE).

PRODUCT OVERVIEW
At A GLANCE
DIAL
FILTER
HOSE TAP
CONNECTION PBUTION
OK/MANUAL
BUTTON
ZONE
BUTTON
BIG LCD
SCREEN
DELAY/+
BUTTON
-BUTTON
ZONE L
ZONE R
+ /DELAY BUTTON
BUTTON FUNCTION
- BUTTON
P BUTTON
ZONE BUTTON
OK / MANUAL
BUTTON
Use "+" to adjust the time. When the dial is
turned to "ON", press and hold "DELAY" to
activate Rain Delay.
Use "-" to adjust the time.
Use "P" to switch watering plans P1, P2, P3
Switch between ZONE L and ZONE R
Use "OK" to conrm the time. When the dial is
turned to "ON", press and hold "MANUAL" to
water manually.
- 01 -
ENEN

SET CLOCK
START TIME
DIAL POSITION FUNCTION
HOW LONG
HOW OFTEN
Switch 12H/24H and
set the current time
Select what time you would
like to sta watering
Determine how long to
water for each zone
(watering duration)
Choose how often you will
water for each zone
(watering frequency)
FUNCTION
ON
OFF
Each ZONE of the timer
will automatically water
according to the watering
plan you set
Turn o all watering plans
Low batte indicator
The selected day of the week
Enter Eve_Day watering mode
ZONE L (left zone)
ZONE R (right zone)
The watering plans P1, P2, P3
The watering sta time
The watering duration
The watering frequency (eve 2 days)
Rain Delay 24H, 48H or 72H
Manual watering (1 minute to 8 hours)
Flashes when watering
LCD ICON FUNCTION
EVERY
D
EVERY
D
- 02 -
EN

Max Flow Rate
Waterproof Level
Working Temperature
Watering Frequency
Watering Duration
Water Outlet
Rain Delay
Water Inlet
Power By
0.5bar-8bar (7.25 psi-116.03 psi)
10 Gal/Min (35L/Min)
IP54
37.4℉-122℉ (3℃-50℃)
Eve 2/3/4/5/6 days or the day of the week
From 1 minute to 3 hours 59minutes (4 hours)
NH (US) for 3/4" taps
BSP(EU) for 3/4" or 1" taps
24H, 48H or 72H
For 3/4" standard garden hose
2 AAA (1.5V) alkaline batteries (Not Included)
Working Water Pressure
SPECIFICATION
- 03 -
ENEN

Note:
1. Remove the batte compament
cover on the back of the timer.
2. Inse 2 new AAA (1.5V) alkaline
batteries (not included).
3. Put the batte compament cover
back on the timer and press rmly to
make sure it is completely sealed.
· Install the batte compament cover securely after installing the
batte to ensure waterproong.
· When the timer is not used for a long time, please remove the
batteries and dispose of them properly.
· Replace batteries when the low batte indicator appears on display.
After you done it, please remember to reset your watering plans.
· Don’t dispose of batteries in re. Batteries may explode or leak.
· To ensure a longer lifespan, please use 2 new AAA alkaline batteries
(not included). Don’t mix new and old alkaline, standard
(carbon-zinc), or rechargeable batteries.
PRODUCT INSTALLATION
INSTALLING THE BATTERIES
- 04 -
EN

INSTALLING THE TIMER
1) Turn o the garden faucet.
2) Wrap Teon Tape around the faucet
threads.
3) Screw the timer to the garden faucet and
make the display as veical as possible
to the ground to prevent rainwater from
accumulating and leaking into the interior.
4) Wrap Teon Tape around the threads of
the timer outlet.
5) Screw the garden hose to the timer outlet.
6) Turn on the faucet after programming the
timer.
Tips: If the connection between the timer and the faucet or hose is
not tight or leaking, wrap more Teon Tape(thread seal tape) to make
them tight.
Note:
Please do not use tools, only install the timer by hand.
When expecting freezing temperatures, timers should be removed
from the hose faucet and stored indoors to avoid potential freeze
damage.
Please install the lter properly and keep it clean as follows.
- 05 -
ENEN

Please activate the device before using it for the rst time or after a
period of inactivity.
ACTIVATE THE TIMER BEFORE USE
Activation Steps：
1. Keep the garden faucet turned o.
2. Turn the timer dial to "ON".
3. Press and hold the "MANUAL" button for 3-5s to enter Manual
Watering Mode.
4. Re-press󶀅the󶀅"ZONE"󶀅button󶀅
twice󶀅to󶀅select󶀅both󶀅ZONE L󶀅󶀅and󶀅
ZONE R. When the screen ashes,
immediately press the "OK"
button to run manual watering.
5. After hearing 2 "click" sounds or waiting for about 5 secs, the valves
in the timer is opened, and then turn the dial to "OFF" to close
the valves.
6. Repeat the step 2-5 for 3-5 times.
7. Test: Turn on the faucet a little bit, and then repeat the step 2-5 to
check if the water ow out or shut o as expected.
If yes, the timer valve is normal, please use it with condence!
If not, please repeat the above steps several times or contact
RAINPOINT suppo team immediately.
Note:
When testing, please keep away from the water timer outlet to avoid
being splashed and wet.
- 06 -
EN

PROGRAMMING THE TIMER
1）First, keep ZONE L and complete the settings, following the steps
1-4 below. Then turn the dial to "ON" to save the changes.
2）Press "ZONE" button to select ZONE R, and follow steps 2-4 to set up.
Turn the dial to "ON" to save all the plans.
Note: Dual zones operating simultaneously have lower water pressure
than single zone because the water pressure is divided between the
two zones.
This is a two-zone timer allowing you to water two dierent areas from
the same faucet. Each zone can be programmed with independent sta
time, how long, and how often.
STEP 0: UNDERSTANDING ZONES
Please design the program separately for each ZONE:
- 07 -
ENEN

STEP 1: SET CLOCK
1. Turn the dial to SET CLOCK.
2. Use the "+" or "-" button to select 12H/24H mode, press "OK"
to conrm.
· 12H mode: with "AM" or "PM"
· 24H mode: without "AM" or "PM"
3. " " ashing: Use the "+" or "-" button to set hour and press "OK"
to conrm.
" " ashing: Use the "+" or "-" button to set minute and press"OK"
to conrm.
" " ashing: Use the "+" button to select the day of the week, then
press "OK" to conrm.
" " without ashing means "Thursday" has been selected.
4. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
TIPS:
1. Press and hold the "+" or "-" button can increase or decrease the time
quickly.
2. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
- 08 -
EN

STEP 2: START TIME
1. Turn dial to START TIME.
2. Use the "+" or "-" button to set the sta time.
(If you choose 12H mode, please note AM and PM).
3. Use the "OK" button to conrm and switch between hours or minutes.
4. After conrming this plan, press the "P" button to switch watering
plans (P1, P2, P3).
(When switching to another plan, the settings from the previous plan
are automatically saved).
5. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
TIPS:
1. Press and hold the "+" or "-" button can increase or decrease the
time quickly.
2. If you want to turn o a ceain plan, please adjust the sta time to
"23 : xx" (24-hour mode) or "11 : xx" PM (12-hour mode) when setting
the plan. Then press the "+" button again, a ashing "OFF" will appear
on the screen. And press "OK" to conrm closing the plan. "OFF" on
the screen is always on, indicating that the plan has been turned o.
3. If you want to cancel the "OFF" plan, press the "+" or "-" button
again on the plan to set its sta time.
4. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
- 09 -
ENEN

1. Turn dial to HOW LONG.
2. Use the "+" and "-" button to set the watering duration.
(The watering duration is from 1 minute to 3 hours 59 minutes)
3. Use the "OK" button to conrm and switch between hours or minutes.
4. After conrming this plan, press the "P" button to switch watering
plans (P1, P2, P3).
(When switching to another plan, the settings from the previous plan
are automatically saved).
5. Turn the dial clockwise to save the changes in this STEP and go to next
STEP.
TIPS:
1. Press and hold the "+" or "-" button can increase or decrease the time
quickly.
2. If you want to turn o a ceain plan, please adjust the watering
duration to "00 H 00 M" when setting the plan, a ashing "OFF" will
appear on the screen. And press "OK" to conrm closing the plan.
"OFF" on the screen is always on, indicating that the plan has been
turned o.
3. If you want to cancel the "OFF" plan, press the "+" or "-" button
again on the plan to set its watering duration.
4. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
STEP 3: HOW LONG
- 10 -
EN

STEP 4: HOW OFTEN
1. Turn the dial to "HOW OFTEN".
2. There are 2 setting modes for watering frequency.
b. Eve 2/3/4/5/6 Days Mode
a. Day of the Week Mode
(Watering plans will run eve 2 days)
Examples of watering frequency of eve 2 day, eve 3 days and eve
5 days：
EVERY
(Watering plans will run eve Sunday, Wednesday, Thursday, and Friday)
EVERY 2 DAY
EVERY
WEEK
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
WEEK
ONE
WEEK
ONE
WEEK
TWO
WEEK
TWO
EVERY 3 DAY
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
EVERY 5 DAY
- 11 -
ENEN

3. Set the Day of the Week Mode
a. Use the "+" or "-" button to move cursor to select the watering
day, and press the "OK" button to conrm.
b. means the "Sunday" has been selected. Press "OK" again can
cancel the selection.
c. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
4. Set the Eve 2/3/4/5/6 Days Mode
a. Use the "+" button to select "Int", press "OK" to conrm, then you
will enter the Eve 2/3/4/5/6 Days Mode.
b. Use the"+" button to select water eve 2/3/4/5/6 days, press "OK"
to conrm.
c. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips:
1. How to return to the Day of the Week Mode?
a. On the Eve 2/3/4/5/6 Days Mode, press the "OK" button twice.
b. Then the "day of the week" will reappear and ash, and the below
"Eve" will disappear.
2. How to set the water timer to water eve day?
If you want to run the watering plans eve day, please select eve
day from Monday to Sunday in the Day of the Week Mode.
(Watering plans will run eve day)
3. You can only choose one of the two watering frequency modes. Once
one of the two is conrmed, the other will be eliminated.
4. The 3 watering plans will use the same watering frequency.
5. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
- 12 -
EN

STEP 5: VIEW SET
1. Turn the dial to "VIEW SET".
2. Press the "P" and "ZONE" buttons to check all settings for dierent
plans or zones.
TIPS: The ITV201P is a multi-schedule 2-zone watering timer.
· Each zone can be set 3 dierent watering plans.
· Each watering plan can be set with a dierent sta time and
watering duration.
· But there is only one watering frequency per zone. That means the 3
watering plans under the zone will all run on the same day.
For example:
1. The setting of P1, P2, P3 for ZONE L
1. (P1 sta watering at 5:00AM, and last for 1 hour)
2. (P2 sta watering at 9:30AM, and last for 30 minutes)
3. (P3 no watering schedule)
EVERY
D
EVERY
D
EVERY
D
The ZONE L will be watered twice eve 2 days. The rst time stas
at 5:00 am and waters for 1 hour; the second time stas at 9:30 am
and waters for 30 minutes.
- 13 -
ENEN

1. (P1 sta watering at 5:00AM, and last for 1 hour)
2. (P2 sta watering at 9:30AM, and last for 30 minutes)
3. (P3 sta watering at 6:30PM, and last for 50 minutes)
The ZONE R will be watered 3 times eve Monday, Wednesday and
Friday. The rst time stas at 5:00 am and waters for 1 hour, the
second time stas at 9:30 am and waters for 30 minutes, and the
last time stas at 6:30 pm and waters for 50 minutes.
2. The setting of P1, P2, P3 for ZONE R
- 14 -
EN

1. Turn dial to "ON".
2. The LCD screen will display the current time and the next watering
sta time in ZONE L and ZONE R.
STEP 6: AUTOMATIC WATERING
CONGRATULATIONS!
Your timer has now been programmed successfully!
It will automatically sta watering based on the programmed sta time,
duration and frequency.
Now you can keep the faucet open and trust the timer to water!
Current time Next watering sta
time in ZONE L Next watering sta time in ZONE R
- 15 -
ENEN

Rain delay allows you to postpone watering on both zones for a set
period of time without interrupting your set watering schedule. To
access the rain delay, follow the steps below.
1) Turn the dial to "ON", press and hold the "DELAY" button for 3-5s
to enter the rain delay mode.
2) In rain delay mode, you can nd the option "24H" ashing on the
screen. Press "+" and "-" button to select delay periods of 24H, 48H,
and 72H.
3) Press the "OK" button to run the delay function, then the screen
will show a countdown of the remaining delay.
4) To cancel the rain delay, turn the dial to "ON", then press and hold
the "DELAY" button for 3-5s again to resume your programmed
watering schedule.
Note:
1.Please remember to press the "OK" button after selecting the rain
delay time to sta the rain delay program. Otherwise, the rain delay
setting will automatically exit after the screen ashes for 3-5s.
RAIN DELAY MODE
ADDITIONAL FUNCTIONS
Turn the dial to
"ON", press and
hold the "DELAY"
button 3-5 seconds
Press the "+"󶀅or󶀅"-"
button to adjust
the delay watering
time(24H, 48H, or
72H)
Press the "OK"
button to sta
rain delay
- 16 -
EN

MANUAL/HAND WATERING
This function allows you to manually water without interrupting your
set watering schedule. To access this feature, please follow the steps
below.
1. Turn the dial to "ON".
2. Hold the "MANUAL" button for 3-5s to enter the Manual Watering
Mode.
3. Select the ZONE which you would like to program by pressing the
"ZONE" button.
· ZONE L is selected by default. Press the "ZONE" button once to
select only ZONE R.
· Press the "ZONE" button twice to select both ZONE L and ZONE R.
Turn the dial
to "ON", press
and hold the
"MANUAL"
button 3-5s
Press the
"ZONE" button
to select the
zone to be
watered
Press the "+"or󶀅
"-" button to
adjust the
manual
watering time
Press the "OK"
button to sta
manual
watering
- 17 -
ENEN

ZONE L only ZONE R only ZONE L and ZONE R
4. Use the "+" or "-" button to adjust the manual watering time from 1
minute to 8 hours. Press "OK" to conrm and switch between hours or
minutes. (The default manual watering time is 10 minutes).
5. After setting the watering time, press the "OK" button immediately
within 5 seconds to sta manual watering and the pattern will
be displayed on the screen.
6. If you need to stop the manual watering, please hold the "MANUAL"
button for 3-5s to exit the manual watering mode and restore the
original watering program. (Or you can turn the dial to "OFF" to stop
the manual watering, but please remember to turn the dial to "ON"
again to restore the original watering program.)
NOTE:
1.Please remember to press the "OK" button after setting the manual
watering time to sta manual watering. Otherwise, the manual watering
setting will be automatically exited after the screen ashes for about
3-5s.
- 18 -
EN