RainPoint TTV102B User manual

BLUETOOTH SMART IRRIGATION TIMER
+ BLUETOOTH GATEWAY
TTV102B+TWG009BW
USER MANUAL

Catalog
1. Device connection
gateway
1.2 Connect Bluetooth irrigation
timing valve
1.3 Connect the gateway to the
Bluetooth timing valve
2. Basic information of the
equipment
3. Version Upgrade
4. Manual Operation
1. Product Appearance
ii. Main Functions iv. Tips for Operation
iii. Installations v. Warranty & Warnings
5. Weather delay
6. Plans and Settings
7.

1. Product Appearance
TWG009BW Bluetooth Gateway
Irrigation Timer
Inlet
Outlet Button
Button LED Indicator
LightLED Indicator
Light
Working Pressure 0.5bar-8bar (7.25 psi-116 psi)
5L/Min-35L/Min
IP54
Working Temperature
Waterproof
3 AAA alkaline batteries (not included)
For 3/4" standard garden hose
NH(US) for 3/4" faucet / hose
BSP(EU) for 1" or 3/4" faucet / hose
Timer Power
Inlet
Outlet

Main Function
Manually ON/OFF the water timer
With 2 schedule types: Normal Schedule and Cycle & Soak
Weather delay 24/48/72 hours
Low power indicator

Installations
1. Device connection
Search for RainPoint on Google Play or App Store or scan the QR
code to download the RainPoint APP. Follow the prompts to
register a RainPointaccountorlog in with an existing account.
1
Plug the TWG009BW Bluetooth gateway into an
outlet near the router and wait 10 seconds for
the device initialization to complete. The blue
indicator lightisalways on and the red indicator
light is blinking slowly, which means it enters the
gateway pairing state.
2
rainpoint

the instructions on the APP page to complete pairing.
3

Once the connection is complete, the paired devices will be displayed
on thehome page.
4
Timer (as shown) and load 3 AAA batteries.
After installation, press and hold the timer
which means the device is ready to connect.
1

Pleasehold the button on the timer for 6
the prompt and clickNext to enter pairing
search.
2
Click" " on the right side of the device to
added.
3

Click "Add existing",
select the device and
click " " to go
to the next step of
pairing.
2
1.3 Connect the gateway to the Bluetooth
Once the connection is complete, the paired devices will be
Gateway to enter the device's details homepage.
1

2. Basic information of the equipment
Once the connection is complete, the
paired devices will be displayed on the
-
tooth Gateway to enter the device's details
homepage.
3
By selecting "Search for Devices", you can also associate more
sub-devices.
1

Clickthe Bluetooth irrigation timer valve to enter the device details
page. This page displays the following information:
status, device status, weatherinformation, irrigation time, last run
time, next run time.
2
At the bottom, there is an operating panel with several options: Manual button, Weather Delay,
3
Manual Button for instant watering need.
Weather Delay for 24/48/72hours.
Schedule Setting with normal schedule and cycle & soak
schedule for options.

Press the button on the top right corner to enter device
information page.
4
3. Version Upgrade
Enter the gateway operation inteace, if
there is a version update, the system will
automatically push the update version
notication
1
Click "Update Now" to enter the update
version inteace. The version number of
this update will be displayed here. Please
click "Update" again.
2

If the device has been upgraded to the
latest version, the product information
page will display "No update available".
5
In addition, the gateway automatic
update function can be turned on,
and the device will be temporarily
oine and updated during inactive
time.
6
This update may take a long time. Make
sure that the device is fully charged. The
device will be unavailable during the
updated.
3
The progress bar can check the update
progress.
4

Manualmode: Clickthe“ ”to manually turn
time is 10 mins.Clickthe“ ”to manually turn
Tap the central circle to set manual watering time,
from 1 min to 24 hours.
4. Manual Operation
When the gateway is upgraded, please remember to upgrade the controller version together.Click
to enter the controller page, the system will push the same upgrade notication, please repeat the
above actions.
7

5. Weather Delay
Tap the“Weather Delay”to enable the rain delay function. The weather
delay can set with 24H, 48H, 72H and closed delay.
6. Schedule and Settings
On the schedule page, after select button, there are two types for
selection: Normal type and Cycle &Soak type.
Normal Schedule:
Cycle & Soak: means the device will run the watering schedule repeatedly
in this period.
1 Schedule Type

Click and choose the schedule type you need and
to water, and save the all settings.
irrigation, the cycle duration and soak duration.
When all the plans are set up, they will be displayed on the timer list.
stop the plan directly.
***Remark***
a. Theminimum period cannot be greater than the
total timeperiod
schedules overlap, causing plans fail of setting.
2 Schedule Settings
(Normal Type) (Cycle & Soak Type)

7
Tips for Operation
the implementation of irrigation plans.
watering plan. The best range for connection and operation is within 60 meters in the open area.
If you need to replace the batte for the timer, please go to control page of the timer on the APP after
replacing the batte so that the system can automatically activate the connection between the timer and
the hub.
1
2
3
For a better experience, it is recommended to update the device version of the timer to the latest version
before use. If there is a push to update the device version later, please upgrade to use the latest version to
optimize and upgrade some functions.
4

Under freezing temperatures, timers should be removed from the faucet and stored indoors to
avoid potential freezing damage.
1
2
1. WARRANTY
Warranty & Warning
2. WARNING
YouTube channel: RainPoint, or visit the linkhttps://rainpointus.com/pages/playlist
If the app and the user manual don’ t have what you’ re looking for, and you need somehelp, please
prepare the Model NO. and LOT NO. of your device and contact us before returning the products to the
store.
US Free Hotline: [phone]
Model NO.: xxxxxxxxxx(On the timer label)
LOT NO.: xxxxxxxxxxxxxxxx(On the timer label)

BLUETOOTH SMART BEWÄSSERUNGSUHR
+ BLUETOOTH GATEWAY
TTV102B+TWG009BW
BENUTZERHANDBUCH

Katalog
i. Überblick über die
Produktion
1. Anschluss des Geräts
1.1 Verbindung mit intelligentem
Bluetooth Gateway
1.2 Bluetooth-Bewässerung
1.3 Verbinden Sie das Gateway mit
1. Erscheinungsbild des Produkts
ii. Wichtigste Funktionen
iv. Tipps zum Betrieb
iii. Einrichtungen
v. Garantie und Warnhinweise
vi. Kundenbetreuung
2. Grundlegende Informationen
über das Ausrüstung
4. Manuelle Bedienung
3. Upgrade der Version
5. Wetterbedingte Verzögerung
6. Pläne und Einstellungen
7. Bewässerungshistorie