Regency Legacy LCTRT7135 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Race Track Conferencing Table • LCTRT7135-LCTRT9543 • INSTRUCTIONS
Organize your parts and hardware. You will need a Phillips head and at head screw driver and rubber mallet.
2 people are needed for assembly.
Hardware :
A: 4 corner brackets(4) • B: Screws(24) • C: cam pins(9) • D: Cam lock covers(9)
BCD
EFG
Parts :
E: Table Top • F: Modesty Pannel • G: End Leg (2)
STEP 1 : Place 2 cam pins(C) in each
end leg(G).
G
c
c
STEP 2 : Place 5 cam pins(C) into top(E)
E
C
C
C
C
C
A

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 3 : Lay one end leg(G) cam pins(C)
facing up on the ground . Connect
modesty(F) to end leg by inserting cam
pins into locks and tightening.
STEP 4 : Connect second end leg(G) to
modesty(F) by inserting cam pins into
locks and tightening.Once connected,turn
unit so feet are on the ground and its in its
correct position.
STEP 5 : (2 people are needed for this
step) Connect top(E) to modesty(F) and
end legs(G) by inserting cam pins into
locks and tightening.
STEP 6 : To nish screw in corner
brackets(A) where the modesty and legs
join using 6 screws(B) each bracket. Once
brackets are in place use 9 cam lock
covers(D) to cover cam locks.
F
GG
F
G
AA
Race Track Conferencing Table • LCTRT7135-LCTRT9543 • INSTRUCTIONS