Regency ONCSDP7124 User manual

Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
71” Double Pedestal Credenza • ONCSDP7124 • INSTRUCTIONS
CARTONS: TT7124, MP4024, PBBF24, PFF24
Parts :
TT-F: Desk Top
(71” x 23.5” x 1”)
Quantity: 1
PED-E: Box Box File Pedestal
(15.5” x 23.5” x 25”)
Quantity: 1
MP-C: Modesty
(40” x 25” x 1”)
Quantity: 1
PED-G: Ped Foot Bracket
(23.5”D)
Quantity: 2
PED-H: Ped Top Bracket
(23.5”D)
Quantity: 2
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Figure 1:
TT-F
PED-G
PED-G
MP-C
PED-F
PED-E
PED-H
PED-H
PED-F: File File Pedestal
(15.5” x 23.5” x 25”)
Quantity: 1
71” Double Pedestal Credenza
Page 1

Hardware :
G: Corner Bracket
Quantity: 2
H: Allen Key
Quantity: 1
I: Set of Keys
Quantity: 2
Quantity: 2
J: Fine threaded
Cam Pins
Quantity: 4
K: 3/4” Wood Screws
(19mm)
Quantity: 18
L: 3/4” Short Bolts
(19mm)
Quantity: 12
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
M: 1.5” Long Bolts
(38mm)
Quantity: 12
N: Glides
Quantity: 4
O: Cam Caps
Quantity: 4
REMOVE PEDESTAL DRAWERS FOR INSTALLATION
STEP 1 : Pull out each drawer on the Box Box File Pedestal(PED-E) and File File Pedestal(PED-F) and nd the black tabs at
the end of the suspension. Lift one side up and press the other side down and simultaneously pull the drawer out. This will unlock the
drawer and release it. Repeat this for all drawers.
P: Handles
Quantity: 5
71” Double Pedestal Credenza • ONCSDP7124 • INSTRUCTIONS
CARTONS: TT7124, MP4024, PBBF24, PFF24
71” Double Pedestal Credenza
Page 2

STEP 2 : Pedestals are Reversible. Decide on a Pedestal orientation(Left and Right). According to the orientation that you choose,
remove 2 Cam Pin Covers from each of the Box Box File Pedestal(PED-E) and the File File Pedestal(PED-F). Then insert a Fine
threaded Cam Pin(J) into each of the revealed inserts.
J
J
PED-E PED-F
J
J
STEP 3 : Attach the Ped Foot Bracket(PED-G) to the bottom of the Box Box File Pedestal(PED-E) with 3 Long Bolts(M) and 3
Wood Screws(K). Also, insert 2 Glides(N) into Ped Foot Bracket(PED-G). Repeat this step for the File File Pedestal(PED-F).
NOTE: Flange on Ped Foot Bracket should face toward your Cam Pin location from STEP 2.
M
M
M
K
K
K
PED-G
PED-E
PED-G
Flange
N
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
N
PED-E
71” Double Pedestal Credenza • ONCSDP7124 • INSTRUCTIONS
CARTONS: TT7124, MP4024, PBBF24, PFF24
71” Double Pedestal Credenza
Page 3

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 5 : Attach Box Box File Pedestal(PED-E) to one of the
Ped Top Brackets(PED-H) using 3 Long Bolts(M).
NOTE: Cam Pins on the Box Box File Pedestal should face
inward for modesty attachment.
PED-H
M
M
M
STEP 6 : Attach the Modesty(MP-C) to the Box Box File
Pedestal(PED-E) by inserting Cam Pins into Cam Locks. Lock
Cams (Figure 1).
NOTE: Cam Locks face the interior of the Desk.
MP-C
PED-E Cam Pin Location
Cam Pin Location
STEP 4 : Attach both Ped Top Brackets(PED-H) to Desk Top(TT-F) as shown below. Use 6 Short Bolts(L) per Ped Top Bracket. Do
not tighten bolts until all bolts have been started.
TT-F
PED-H
L
L
L
PED-H
PED-E
71” Double Pedestal Credenza • ONCSDP7124 • INSTRUCTIONS
CARTONS: TT7124, MP4024, PBBF24, PFF24
71” Double Pedestal Credenza
Page 4

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 7 : Attach the File File Pedestal(PED-F) to the
Modesty(MP-C) by sliding the Pedestal into Cam Locks on the
Modesty. Lock Cams (Figure 1).
STEP 8 : Attach the File File Pedestal(PED-F) to the second
Ped Top Brackets(PED-H) using 3 Long Bolts(M).
PED-H
M
M
M
STEP 10 : Flip desk upright with at least 2 people. Replace
drawers and attach Handles(P) to the Box Box File
Pedestal(PED-E) and the File File Pedestal(PED-F). Finish
by covering all Cam Locks on the Modesty(MP-C) with Cam
Caps(O).
STEP 9 : For additional stability, attach 1 Corner Bracket(G)
to Box Box File Pedestal(PED-E) and the Modesty(MP-C)
with 6 Wood Screws(K) per Corner Bracket. Repeat this step
for the File File Pedestal(PED-F).
MP-C
PED-F
PED-F
71” Double Pedestal Credenza • ONCSDP7124 • INSTRUCTIONS
CARTONS: TT7124, MP4024, PBBF24, PFF24
71” Double Pedestal Credenza
Page 5