Roto NT Designo II Guide

86 February 2015 IMO_109_EN_v3 Roto NT Designo II Subject to change.
Adjustment
Explanation on the adjustment chapter
Symbols for the sash adjustment when installed
These symbols facilitate the orientation while adjusting the window sashes
after installation with the following steps. Use a 4mm Allen key as tool.
Height adjustment
Lateral adjustment
Gasket-compression adjustment
NOTE!
Adjusting Roto hardware components may only be carried out by
authorised and qualified personnel.

Subject to change. Roto NT Designo II IMO_109_EN_v3 February 2015 87
Adjustment
Adjustment instructions
Sash stay
+2.0
–2.0
Lateral adjustment
+0.5
–0.5
Gasket-compression adjustment

88 February 2015 IMO_109_EN_v3 Roto NT Designo II Subject to change.
+1.5–1.0
Height adjustment
After the height adjustment, the load transfer device
has to be readjusted (refer to page69).
+2.0–1.5
Lateral adjustment
+0.5
–0.5
Gasket-compression adjustment
Adjustment
Adjustment instructions
Pivot rest/corner hinge

Subject to change. Roto NT Designo II IMO_109_EN_v3 February 2015 89
Adjustment
Adjustment instructions
Locking cams
Locking cam adjustment instructions
Cam type Adjustment range Gasket compression Height Side view Tools
E cam
90° 90°
+/– 0.8mm
P cam
90° 90°
+/– 0.8mm
V cam
Cam type Adjustment range Gasket-compression
adjustment in mm
Height adjustment in mm Side view!/!top view Tools
90° 90°
+/– 0.8mm +/– 0.2mm
180° 180°
– +/– 0.4mm
270° 270°
+/– 0.8mm +/– 0.6mm
360° 360°
– +/– 0.8mm
0 = Original position
– 0.8mm
max. adjustment
+ 0.8mm
max. adjustment

90 February 2015 IMO_109_EN_v3 Roto NT Designo II Subject to change.
Operation
Operating information
Handle positions of Tilt&Turn hardware
The following symbols show the different handle positions and the resulting
sash positions of windows and balcony doors.
Handle position Sash position Symbol Meaning
Closed position of the sash
Opened turn position of the sash
Opened tilt position of the sash
Malpositioning of the sash

Subject to change. Roto NT Designo II IMO_109_EN_v3 February 2015 91
Operation
Operation information for end-users
Handle positions of Tilt&Turn/Tilt-First hardware
The following symbols and signs can be used on windows and balcony
doors to protect the end-user.
Please order stickers separately (OPR_14_DE-EN_v1, OPR_15_DE-EN_v1).
geschlossen
closed
Drehkipp-Beschlag
Tilt&Turn hardware
öffnen
open
kippen
tilt
Fehlschaltungen
vermeiden
Avoid mishandling
mode!
08/2012 OPR_14_DE-EN_v1
geschlossen
closed
TiltFirst-Beschlag
TiltFirst hardware
kippen
tilt
öffnen
open
Fehlschaltungen
vermeiden
Avoid mishandling
mode!
08/2012 OPR_15_DE-EN_v1