Samsung NX-6B User manual

µµ ≈•∏‡∆Æ4 99.3.25 4:34 PM ∆‰¿Ã¡ˆ1

This manual may be altered without prior notices as
the circumstances so require, but as the registered literature
of Samsung Electronics Co. LTD., no part of the literature
may be reproduced in any manner or distributed to any
party without prior consent of the company.
1998

GENERALINFORMATION
About This Book
Keyset Layout
Precautions
Tone and Ring Signal
OUTSIDECALLS
Making an outside call
Answering an outside call
INTERCOMCALLING
Calling other Stations
Calling the Operator Group
Station Group Calls
Answer Mode Change
CALL PROCESSING
System Hold
Exclusive Hold
Transferring Calls
Camp-on Transfer
Transfer with Page
Conference Calls
Unsupervised Conference
Call Pickup
Callback
Sending aFlash
CONTENTS
2
5
6
10
11
12
13
14
15
15
16
17
18
19
21
21
23
25
25
26
27
TABLE OF CONTENTS

DIALINGFEATURES
Last Number Redial
Saved Number Redial
Automatic Redial
Speed-Dialing
Chain Dialing
Pause in Normal Dial
PAGING&MESSAGING
Paging
Meet Me Page and Answer
Leaving aMessage
CONVENIENCEFEATURES
Speakerphone
Mute
Do Not Disturb
Group Listening
Alarm Setting
Call Forward
Background Music
Vacant Messages
Station Locking
Group In/Out
Boss/Secretary Hot Line
Answering the Doorphone
Calling the Doorphone
Account Codes
Ringing Line Preference
Timer
3
CONTENTS
29
30
31
32
33
33
34
35
37
39
40
40
41
41
42
45
45
46
47
48
48
49
49
50
51

SPECIALFEATURES
Barge-in Override
Toll Restriction Override
Walking Class of Service
Night Service
DISA (Direct Inward System Access)
Using Add-On-Module
APPENDIX1
USERPROGRAMMING
PROGRAMMING KEYS
MMC 00 STATION LOCK
MMC 01 STATION PASSCODE
MMC 10 ANSWER MODE
MMC 11 CALL FORWARD
MMC 12 STATION ON/OFF
MMC 13 RING FREQUENCY
MMC 14 STATION NAME
MMC 15 DATE DISPLAY
MMC 16 KEY EXTENDER
MMC 17 STATION SPEED-DIAL
4
CONTENTS
52
52
53
54
55
55
56
58
59
59
59
60
60
61
61
61
62
62

Yourkeysetisthe mostvisible partofthe
SAMSUNGNew-AnalogKeysystem.No matter
whatmodel keysetyouareusing,withor
withouta display,telephone callsare
handledinthesame way.TheNX-24E
keysethasafewadditional conveniences
thatarenotavailable toNX-24BandNX-6B
keysetusers.Thesearenotedthroughout this
guide.
Pleasetakethetime tostudythisguideand
tobecome familiarwiththe operationof
yourkeyset.Keepthisguidehandy.youmay
needtoreferto itforinstructionsregarding
infrequentlyusedfeatures.
Learningtouseyourkeysetcorrectlywill
make everydaytelephone communicationsa
breeze.
5
GENERAL INFORMATION
AboutThisBook

GENERAL INFORMATION
6
Liquid Crystal Display
(LCD)
It shows date, time, umber
dialed and other useful call
information. 16 Programmable Buttons
with RED Light
Used to call stations directly, to
indicate busy conditions of ther
stations, for one touch dialing
and many other system features.
8 Programmable Buttons with
Dual Colored Light
Used for intercom calls, outside lines
and many other system features.
Pullout Directory tray
Microphone
For hands-free operation.
Function Keys and Indicators
Used to access the most commonly
used features. The indicator light or
flickers to indicate the feature in use.
Volume Control Buttons
Used to set independent levels for
handset, speaker, background
music, ring and page volumes.
Speaker
For hands-free operation and ringing.
Keyset Layout
NX-24E
euro_oper 99.3.25 11:27 AM ∆‰¿Ã¡ˆ1

GENERAL INFORMATION
7
NX-24B
Without LCD
16 Programmable Buttons
with RED Light
Used to call stations directly, to
indicate busy conditions of other
stations, for one touch dialing
and many other system features.
8 Programmable Buttons
with Dual Colored Light
Used for intercom calls, outside
lines and many other system
features.
Function Keys and Indicators
Used to access the most commonly
used features. The indicator light or
flickers to indicate the feature in use.
Microphone
For hands-free operation.
Volume Control Buttons
Used to set independent levels
for handset, speaker, background
music, ring and page volumes.
Speaker
For hands-free operation and ringing.
Pullout Directory tray
euro_oper 99.3.25 11:27 AM ∆‰¿Ã¡ˆ2

GENERAL INFORMATION
8
NX-6B
6 Programmable
Buttons with RED Light
Used to call stations directly,
to indicate busy conditions of
other stations, for one touch
dialing and many other
system features.
Function Keys and
Indicators
Used to access the most
commonly used features. The
indicator light or flickers to
indicate the feature in use.
Pullout Directory tray
Speaker
For ringing.
Volume Control Buttons
Used to set independent levels for
handset, speaker, background
music, ring and page volumes.
euro_oper 99.3.25 11:27 AM ∆‰¿Ã¡ˆ3

GENERAL INFORMATION
9
NX-AOM
24 Programmable Buttons
with RED Light
Used to call stations directly to
indicate busy conditions of other
stations, for one touch dialing and
many other system features.
euro_oper 99.3.25 11:27 AM ∆‰¿Ã¡ˆ4

Donotuse orstore inareaswith highlevelsof
dirt,dust,orcorrosivegas.Theseplaceswill
shortenyourunit'suseful life.
Keeptheunitawayfrom hotareas.High
temperature canshortenthe life ofelectronic
devices,damagebatteries,andcaneven
distortormeltcertainplastics.
Keepitdry.Ifwatershouldgetonit,wipe itoff
immediately.Watercontainsmineralsthatcan
corrode electronic circuits.
Donotdropyourproduct.Thiswill likelyresultin
failureto operate.Circuitboardscancrackand
casesmaynotsurvivethe impact.Handlingyour
productroughlywill shortenitsuseful life.
Donotuseharshchemicals,cleaningsolvents,or
strongdetergentstokeepyourunitlookingnew.
You needonlywipe itwitha dampenedclothfrom
time totime.
Toreduce therisk ofelectric shock,donotremove
the coveroftheunit.Noserviceable partsinside.
Referservicingtoqualifiedservice personnel.
Iftheunitisnotworkingproperly,take it toyour
localA/Scenter.
GENERAL INFORMATION
10
Precautions

GENERAL INFORMATION
11
ToneandRingSignal
¡Ü
DIALTONE indicates you can begin dialing.
¡Ü
RINGBACKTONE indicates the station you dialed is ringing.
¡Ü
BUSYTONE indicates the station you dialed is busy.
¡Ü
TRANSFERTONE indicates your call is being held and you can dial
another party.
¡Ü
ERRORTONE indicates you have done something incorrectly.
¡Ü
CONFIRMATIONTONE indicates you have correctly set or canceled a
feature.
¡Ü
MESSAGEWAITINGTONE indicates you have messages waiting. (SLT)
¡Ü
COLINERING indicates an outside call is ringing on your station.
¡Ü
STATIONRING indicates an intercomcall is ringing on your station.
¡Ü
DOORPHONERING indicates adoor phone call is ringing on your
station.
¡Ü
ALARMRING indicates an alarm is ringing on your station.
CONTINUOUS
100 ON /100 OFF /
100 ON /100 OFF
500 ON /250 OFF /
500 ON /250 OFF
200 ON /200 OFF /
200 ON /200 OFF
500 ON /500 OFF /
500 ON /500 OFF
400 ON /200 OFF /
400 ON /3000 OFF
1000 ON /3000 OFF /
1000 ON /3000 OFF
500 ON /500 OFF /
500 ON /500 OFF
500 ON /500 OFF /
500 ON /500 OFF
1000 ON /2000 OFF /
1000 ON /2000 OFF
200 ON /200 OFF /
200 ON /200 OFF

ToSelectASpecificOutsideLine
Keyphone
1. Check the line status indicator, and press an idle
outside line button.
¡¤ You will receive dial tone through the speaker.
Or, lift the handset and dial the outside line access
number.
2. Dial the outside telephone number.
Standard phone
1. Lift the handset and dial the outside line access
number.
¡¤ You will receive dial tone through the speaker.
2. Dial the outside telephone number.
ToselectanyFree OutsideLinewithinan
OutgoingGroup
Keyphone&Standard phone
1. Lift the handset, and listen for adial tone.
2. Dial the outgoing group number.
OUTSIDE CALLS
12
Making anOutsideCall

¡¤A free line in the group will be selected, and you
will hear adial tone.
¡¤If all lines in the group are busy, ¡¸9ALL BUSY¡¹is
displayed, and you will receive abusy signal.
3. Dial the outside telephone number.
¡¤ To answer acall while you are on the phone, press
the flashing line button. The current line is automatically
held, and you can talk with the new calling party.
¡¤ When making an outside call on adial pulse line, all
digits entered after pressing [#] will be sent as tones.
¡¤ When dialing an outside call, press
[PSE] to insert a
preprogrammed pause time.
[PSE] time can be set by system programming.
Keyphone
1. Lift the handset.
Or press [SPEAKER] .
Use either handset or speakerphone,
Standard phone
1. Lift the handset.
You may answer calls ringing at another station by
pressing the rapidly flashing outside line button. Or, lift
the handset and press [1][0] and the outside line
number. You will be connected to the outside line.
OUTSIDE CALLS
13
Answering anoutsideCall
¡îNOTE
¡îNOTE

Keyphone
1. Lift the handset and dial the desired station
number.
Or, press the desired station's [DSS] button with
the handset on-hook.
¡¤The speakerphone activates automatically and
your phone starts dialing.
¡¤To program astation number into the
[DSS]
button, refer to the <Technical Manual>.
2. When other party answers, either speak into the
handset use the speakerphone.
3. To end the call, replace the handset or, if using the
speakerphone, press [SPEAKER] .
To answer aringing line or place acall to another
intercom station while talking with an intercom station,
press the [DSS] button for the desired second station
without hanging up. The original station line is
automatically disconnected, and the second station will ring.
This feature is not available on standard phones.
Standard phone
1. Lift the handset and dial the desired station
number.
INTERCOM CALLING
14
CallingOtherStations
¡îNOTE

2. To end the call, replace the handset.
Keyphone
Lift the handset or press [SPEAKER] .
Dial [0] to call your system operator group.
Standard phone
Lift the handset and dial [0].
You can call the operator group by dialing the operator
group number. The operator group is the station group
numbered 500.
Keyphone
Lift the handset or press [SPEAKER] ,and dial the
station group number.
Or, press the button programmed to dial that station
group number.
Standard phone
Lift the handset and dial the station group number.
INTERCOM CALLING
15
CallingtheOperator
Group
StationGroupCalls
¡îNOTE

You can set your phone to Auto-Answer or
Voice-Announce mode.
ToSetAuto-AnswerMode
1. With the handset on-hook, press [AUTORDL]
and dial [1][0] to enter program mode.
2. Press [2] to set Auto-Answer Mode.
3. Press [AUTORDL] to save and exit.
ToSetVoice-AnnounceMode
1. With the handset on-hook, press [AUTORDL]
and dial [1][0] to enter program mode.
2. Press [3] to set Voice-Announce Mode.
3. Press [AUTORDL] to save and exit.
The Answer Mode can be changed by caller. If the
caller wants to change the answer mode of the station
called, press [TRANSFER] and dial [1][4] ,or press the [FAT].
Press the [FAT] button can be set by system key
programming (MMC 71).
On asingle line telephone, hook flash and dial [1][4] .
INTERCOM CALLING
16
AnswerModeChange
¡îNOTE

When connected to an outside line, use this feature.
It allows you to hang up the line temporarily without
disconnecting. While on hold, the held party will
hear music. Any other station may retrieve the
outside line system being held.
Keyphone
1. When connected to any outside line press [HOLD] .
¡¤The outside line button placed on hold and the
HOLD indicator blink slowly.
2. After placing acall on hold, you can answer or
make another call.
3. To retrieve the held outside line, press the blinking
line button.
Standard phone
1. When connected to an outside line, hook flash.
2. Press [1][1] .
3. After placing acall on hold, you can answer or
make another call.
4. To retrieve the call placed on hold,
press [1][1] .
CALL PROCESSING
17
SystemHold

¡¤If you know the outside line number placed
on hold, you can dial [1][0] and the outside
number to retrieve the call.
If the held line is not released within apredetermined
time, the system rings you back so that you do not
forget about the call. If you do not answer the call,
it is automatically recalled to the operator group.
(Operator group is the station group numbered 500 )
To place acall on hold at your phone and not
allow another user to take it, use ExclusiveHold .
ToPlaceanOutsideCall on
ExclusiveHold
Keyphone
1. When connected to an outside line, press
[HOLD] twice.
¡¤The outside line placed on hold will blink green
at your keyset, and show asteady red light on
all other keysets.
2. After placing acall on hold, you can answer or
make another call.
3. To retrieve the held outside line, press the blinking
line button.
¡¤ You must press 2nd
[HOLD] within 2seconds after
pressing [HOLD] the first time (Step 1).
¡¤ If aheld line is not released within apredetermined
CALL PROCESSING
18
ExclusiveHold
¡îNOTE
¡îNOTE

time, the system rings you back, so that you do not
forget about the call. If you do not answer the call,
it is automatically recalled to the operator group.
(Operator group is station group numbered 500 )
ToPlaceanIntercomCall on
Exclusivehold
Keyphone
1. When connected to astation, press [HOLD]
once.
¡¤The station's
[DSS] button will blink green
on your keyset, and show asteady red
light on other keysets.
2. After placing acall on hold, you can answer
or make another call.
3. To retrieve the held station call, press the
blinking [DSS] button.
Intercom calls will always be placed on exclusive hold.
This feature allows you to transfer acall to another
station or group. Any outside or intercom call may
be transferred, regardless of whether you initiated or
received the call.
When you transfer acall, you may wait on the line
and announce the call, or you may hang up when
you hear the ringback tone. The connection between
the caller and the person to whom the call is being
CALL PROCESSING
19
TransferringCalls
¡îNOTE