Samsung SMT-I3105 User manual

SMT-i3105 Quick Reference Guide
Version 1.1 4/2014
SCM Default Feature Codes
While the most frequently used features appear as dedicated buttons on your phone, there are a
host of additional features that can be used by dialing the default codes listed in the table below.
Some feature codes require an extension, group number or orbit number. When using these
codes, replace the letter Xwith the appropriate digits. For example; to pick up a ringing call at
extension 2205, us the Direct Call Pickup code *0X#where X is 2205. User dials *02205#
Feature
Code
Feature
Code
All Feature Clear *99# Call Park Extension *11#
Auto Answer Mode - Cancel *430# Call Park Orbit *10X#
Auto Answer Mode - Set *431# Conference *89#
Auto Retry of Busy Number - Cancel *170# Conference on Answer *81X#
Auto Retry of Busy Number - Set *171# Direct Call Pickup *0X#
Barge-In with Tone *23X# DND - Cancel *400#
Barge-In without Tone *24X# DND - Set *401#
Callback - Cancel *160# DND Override *25#
Callback - Set *161# Group Call Pickup **#
Call Forward All - Cancel *610# Group Call Forward - Cancel *680X#
Call Forward All - Set *611X# Group Call Forward - Set *681X#
Call Forward Busy - Cancel *620# In/Out of Hunt Group - In *531X#
Call Forward Busy - Set *621X# In/Out of Hunt Group - Out *530#
Call Forward Busy/No Answer - Cancel *640# Station Paging *55#
Call Forward Busy/No Answer - Set *641X# Voice Mail Access *88#
Call Forward No Answer - Cancel *630# Voice Mail Memo ##
Call Forward No Answer - Set *631X# Voice Mail Transfer *87#
Call Forward Clear All *60#
Note: The system administrator may have set your system up so users do not need to
dial the #. If so you can ignore the # in the code.
Condition
Phone Status Indicator
Busy Steady RED
Ringing Flashing RED
Voice Message Flashing GREEN
SMT
-
i3105
IP Phone Quick Reference uide
For more informa ion on your phone se ings and fea ures see he SMT-i3105 User Guide
Name
Function
LCD screen Shows call info, menus and s a us icons
Sof bu on
Selec s
func ion from he LCD sof menus
Phone S a us Indica or
Shows he phones s a us
Call Log bu on Log of incoming & ou going calls & move up in display
OK Bu on
Press OK
bu on o make a selec ion
Phone Book Bu on
Displays phonebook lis
and moves down in display
Transfer bu on Transfers calls
5 Programmable bu ons
Can assign various fea ure
s wi h LED indica ion
Hold Bu on
Holds
a call emporarily wi hou hanging up
Conference bu on Makes a conference call
Volume bu on
Se Volume for Ringing, Handse , Speaker
Mu e Bu on
Toggles he microphone on or off.
Speaker bu on
Toggles he
speakerphone
on or off.
Dial bu ons En ers numbers and charac ers.
Handse
Use for priva e conserva ions
SCM
Samsung Communication Manager
SCM
Default Feature Codes

SMT-i3105 Quick Reference Guide
Version 1.1 4/2014
Answering a Call
•Pick up the Handset or press the Speaker button to use the speakerphone
Making an outside call (local or long distance)
•Pick up the Handset or press the Speaker button to use the speakerphone
•Dial 9 plus the 10/11 digit telephone number
•To hang up, replace the handset, or press END soft-key or press the Speaker button
Making an internal call (intercom)
•Pick up the Handset or press the Speaker button to use the speakerphone
•Dial the extension number or group number
•To hang up, replace the handset, or press END soft-key or press the Speaker button
Using the Hold feature
•Press the Hold button or HOLD soft-key
•To retrieve a call from hold, press Hold button or RESUME soft-key or press the flashing
green Call button
Transfer a call (Blind Transfer)
•Press the Transfer button while on a call (this will place the call on hold)
•Dial the extension number you would like to transfer to.
•Press Transfer again or simply hang up to complete the transfer
Transfer a call (Screened Transfer)
•Press the Transfer button while on a call (this will place the call on hold)
•Dial the extension number you would like to transfer to
•When they answer speak privately
•Press Transfer again or simply hang up to complete the transfer
Making Conference Calls
•Call the first person (internal or outside number) you would like to conference with
•When connected, press the Conference button, then dial the second internal or outside
number
•Once the second person answers, press Conference button again
•Now everyone is joined together
•Repeat to continue adding up to 3 additional parties. (max 5, you plus 4 others)
If the party you dialed is unavailable, press CANCEL soft-key to disconnect and return to
the conference
Do Not Disturb
•Dial *401# to set, dial *400# to cancel
Call Forwarding
•Press [Menu] scroll to Call Forward/DND
•Scroll to call forward type then select by pressing the OK button
•Change the Mode to Enable or Disable as desired
•Type the number to forward to (EX: 9+telephone number or extension number)
•Press [Save] [OK] [END]
Setting up your Voice Mail Box
•Dial your extension.
•When prompted, enter your password (The default password is 0000).
The following options can be used when inside the voice mail menu:
•Dial [#][7] for Personal Administration Menu
oDial [1] to assign a new password (1 ~ 8 digits)
oDial [2] to record your name (speak your name)
oDial [3] to enter Your Dial-By-Name for the system Directory.(use dial pad)
•Dial [#][5] for Personal Greetings Menu
oDial [1] to record your Primary No Answer Greeting
oDial [7] to record your Mailbox Greeting
Retrieving message from your Voice Mail Box
•Press the Menu button, then select Message button
•Voice Mail option will display the number of messages [0]
•Scroll to Voice Mail and select by pressing the OK button
•Use options in the phone display or follow voice mail prompts
Mute Handset or Microphone
•Press the Mute button while using the handset to mute your voice
•Press the Mute button while using the speakerphone to mute the microphone
Assign a Programmable Key (Button)
•Press an unassigned key or press and hold an assigned key for 3 seconds.
•Unassigned Key Display Shows: [Programmable Key] Press the OK button.
•Assigned Key Display Shows: [Current Assigned Key]
•Cursor L or R to change Mode to Enable.
•Move down then cursor L or Right to select key type. AME Enable is the first choice.
•Move down to Name, then use the dial pad to enter characters.
•Some keys require a value, like Ext. or Tel. number. If required, move down to Value,
then use the dial pad to enter the numbers.
•Move down to Line, then cursor L or R to select the Line number you want to assign this
key to. You may have one or more lines assigned to your phone.
•Press Save to complete the process. Then press the soft key showing OK.